[PATCH v4 3/3] drm/panel: Add Rocktech jh057n00900 panel driver

Support Rocktech jh057n00900 5.5" 720x1440 TFT LCD panel. It is a MIPI DSI video mode panel.

The panel seems to use a Sitronix ST7703 look alike (most of the commands look similar to the ST7703's data sheet but use a different number of parameters). The initial version of the DSI init sequence (including sleeps) were provided by the vendor. Sleeps were reduced considerably though to speed up initialization.

Signed-off-by: Guido Günther agx@sigxcpu.org Reviewed-by: Sam Ravnborg sam@ravnborg.org --- MAINTAINERS | 6 + drivers/gpu/drm/panel/Kconfig | 13 + drivers/gpu/drm/panel/Makefile | 1 + .../drm/panel/panel-rocktech-jh057n00900.c | 386 ++++++++++++++++++ 4 files changed, 406 insertions(+) create mode 100644 drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c

diff --git a/MAINTAINERS b/MAINTAINERS index 8f1f505920df..57968eabe844 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4999,6 +4999,12 @@ S: Orphan / Obsolete F: drivers/gpu/drm/r128/ F: include/uapi/drm/r128_drm.h

+DRM DRIVER FOR ROCKTECH JH057N00900 PANELS +M: Guido Günther agx@sigxcpu.org +S: Maintained +F: drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c +F: Documentation/devicetree/bindings/display/panel/rocktech,jh057n00900.txt + DRM DRIVER FOR SAVAGE VIDEO CARDS S: Orphan / Obsolete F: drivers/gpu/drm/savage/ diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig index f53f817356db..645ceb5776a9 100644 --- a/drivers/gpu/drm/panel/Kconfig +++ b/drivers/gpu/drm/panel/Kconfig @@ -149,6 +149,19 @@ config DRM_PANEL_RAYDIUM_RM68200 Say Y here if you want to enable support for Raydium RM68200 720x1280 DSI video mode panel.

+config DRM_PANEL_ROCKTECH_JH057N00900 + tristate "Rocktech JH057N00900 MIPI touchscreen panel" + depends on OF + depends on DRM_MIPI_DSI + depends on BACKLIGHT_CLASS_DEVICE + help + Say Y here if you want to enable support for Rocktech JH057N00900 + MIPI DSI panel as e.g. used in the Librem 5 devkit. It has a + resolution of 720x1440 pixels, a built in backlight and touch + controller. + Touch input support is provided by the goodix driver and needs to be + selected separately. + config DRM_PANEL_RONBO_RB070D30 tristate "Ronbo Electronics RB070D30 panel" depends on OF diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile index 7834947a53b0..0e739bbc44b8 100644 --- a/drivers/gpu/drm/panel/Makefile +++ b/drivers/gpu/drm/panel/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o obj-$(CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN) += panel-raspberrypi-touchscreen.o obj-$(CONFIG_DRM_PANEL_RAYDIUM_RM68200) += panel-raydium-rm68200.o +obj-$(CONFIG_DRM_PANEL_ROCKTECH_JH057N00900) += panel-rocktech-jh057n00900.o obj-$(CONFIG_DRM_PANEL_RONBO_RB070D30) += panel-ronbo-rb070d30.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6D16D0) += panel-samsung-s6d16d0.o diff --git a/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c new file mode 100644 index 000000000000..158a6d548068 --- /dev/null +++ b/drivers/gpu/drm/panel/panel-rocktech-jh057n00900.c @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Rockteck jh057n00900 5.5" MIPI-DSI panel driver + * + * Copyright (C) Purism SPC 2019 + */ + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> +#include <drm/drm_print.h> +#include <linux/backlight.h> +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> +#include <linux/module.h> +#include <video/display_timing.h> +#include <video/mipi_display.h> + +#define DRV_NAME "panel-rocktech-jh057n00900" + +/* Manufacturer specific Commands send via DSI */ +#define ST7703_CMD_ALL_PIXEL_OFF 0x22 +#define ST7703_CMD_ALL_PIXEL_ON 0x23 +#define ST7703_CMD_SETDISP 0xB2 +#define ST7703_CMD_SETRGBIF 0xB3 +#define ST7703_CMD_SETCYC 0xB4 +#define ST7703_CMD_SETBGP 0xB5 +#define ST7703_CMD_SETVCOM 0xB6 +#define ST7703_CMD_SETOTP 0xB7 +#define ST7703_CMD_SETPOWER_EXT 0xB8 +#define ST7703_CMD_SETEXTC 0xB9 +#define ST7703_CMD_SETMIPI 0xBA +#define ST7703_CMD_SETVDC 0xBC +#define ST7703_CMD_SETSCR 0xC0 +#define ST7703_CMD_SETPOWER 0xC1 +#define ST7703_CMD_SETPANEL 0xCC +#define ST7703_CMD_SETGAMMA 0xE0 +#define ST7703_CMD_SETEQ 0xE3 +#define ST7703_CMD_SETGIP1 0xE9 +#define ST7703_CMD_SETGIP2 0xEA + +struct jh057n { + struct device *dev; + struct drm_panel panel; + struct gpio_desc *reset_gpio; + struct backlight_device *backlight; + bool prepared; + + struct dentry *debugfs; +}; + +static inline struct jh057n *panel_to_jh057n(struct drm_panel *panel) +{ + return container_of(panel, struct jh057n, panel); +} + +#define dsi_generic_write_seq(dsi, seq...) do { \ + static const u8 d[] = { seq }; \ + int ret; \ + ret = mipi_dsi_generic_write(dsi, d, ARRAY_SIZE(d)); \ + if (ret < 0) \ + return ret; \ + } while (0) + +static int jh057n_init_sequence(struct jh057n *ctx) +{ + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + struct device *dev = ctx->dev; + int ret; + + /* + * Init sequence was supplied by the panel vendor. Most of the commands + * resemble the ST7703 but the number of parameters often don't match + * so it's likely a clone. + */ + dsi_generic_write_seq(dsi, ST7703_CMD_SETEXTC, + 0xF1, 0x12, 0x83); + dsi_generic_write_seq(dsi, ST7703_CMD_SETRGBIF, + 0x10, 0x10, 0x05, 0x05, 0x03, 0xFF, 0x00, 0x00, + 0x00, 0x00); + dsi_generic_write_seq(dsi, ST7703_CMD_SETSCR, + 0x73, 0x73, 0x50, 0x50, 0x00, 0x00, 0x08, 0x70, + 0x00); + dsi_generic_write_seq(dsi, ST7703_CMD_SETVDC, 0x4E); + dsi_generic_write_seq(dsi, ST7703_CMD_SETPANEL, 0x0B); + dsi_generic_write_seq(dsi, ST7703_CMD_SETCYC, 0x80); + dsi_generic_write_seq(dsi, ST7703_CMD_SETDISP, 0xF0, 0x12, 0x30); + dsi_generic_write_seq(dsi, ST7703_CMD_SETEQ, + 0x07, 0x07, 0x0B, 0x0B, 0x03, 0x0B, 0x00, 0x00, + 0x00, 0x00, 0xFF, 0x00, 0xC0, 0x10); + dsi_generic_write_seq(dsi, ST7703_CMD_SETBGP, 0x08, 0x08); + msleep(20); + + dsi_generic_write_seq(dsi, ST7703_CMD_SETVCOM, 0x3F, 0x3F); + dsi_generic_write_seq(dsi, 0xBF, 0x02, 0x11, 0x00); + dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP1, + 0x82, 0x10, 0x06, 0x05, 0x9E, 0x0A, 0xA5, 0x12, + 0x31, 0x23, 0x37, 0x83, 0x04, 0xBC, 0x27, 0x38, + 0x0C, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0C, 0x00, + 0x03, 0x00, 0x00, 0x00, 0x75, 0x75, 0x31, 0x88, + 0x88, 0x88, 0x88, 0x88, 0x88, 0x13, 0x88, 0x64, + 0x64, 0x20, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, + 0x02, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00); + dsi_generic_write_seq(dsi, ST7703_CMD_SETGIP2, + 0x02, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x02, 0x46, 0x02, 0x88, + 0x88, 0x88, 0x88, 0x88, 0x88, 0x64, 0x88, 0x13, + 0x57, 0x13, 0x88, 0x88, 0x88, 0x88, 0x88, 0x88, + 0x75, 0x88, 0x23, 0x14, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x0A, + 0xA5, 0x00, 0x00, 0x00, 0x00); + dsi_generic_write_seq(dsi, ST7703_CMD_SETGAMMA, + 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, 0x37, + 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, 0x11, + 0x18, 0x00, 0x09, 0x0E, 0x29, 0x2D, 0x3C, 0x41, + 0x37, 0x07, 0x0B, 0x0D, 0x10, 0x11, 0x0F, 0x10, + 0x11, 0x18); + msleep(20); + + ret = mipi_dsi_dcs_exit_sleep_mode(dsi); + if (ret < 0) { + DRM_DEV_ERROR(dev, "Failed to exit sleep mode"); + return ret; + } + /* Panel is operational 120 msec after reset */ + msleep(60); + ret = mipi_dsi_dcs_set_display_on(dsi); + if (ret) + return ret; + + DRM_DEV_DEBUG_DRIVER(dev, "Panel init sequence done"); + return 0; +} + +static int jh057n_enable(struct drm_panel *panel) +{ + struct jh057n *ctx = panel_to_jh057n(panel); + + return backlight_enable(ctx->backlight); +} + +static int jh057n_disable(struct drm_panel *panel) +{ + struct jh057n *ctx = panel_to_jh057n(panel); + + return backlight_disable(ctx->backlight); +} + +static int jh057n_unprepare(struct drm_panel *panel) +{ + struct jh057n *ctx = panel_to_jh057n(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + + if (!ctx->prepared) + return 0; + + mipi_dsi_dcs_set_display_off(dsi); + ctx->prepared = false; + + return 0; +} + +static int jh057n_prepare(struct drm_panel *panel) +{ + struct jh057n *ctx = panel_to_jh057n(panel); + int ret; + + if (ctx->prepared) + return 0; + + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel."); + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + usleep_range(20, 40); + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + msleep(20); + + ret = jh057n_init_sequence(ctx); + if (ret < 0) { + DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d", ret); + return ret; + } + + ctx->prepared = true; + + return 0; +} + +static const struct drm_display_mode default_mode = { + .hdisplay = 720, + .hsync_start = 720 + 90, + .hsync_end = 720 + 90 + 20, + .htotal = 720 + 90 + 20 + 20, + .vdisplay = 1440, + .vsync_start = 1440 + 20, + .vsync_end = 1440 + 20 + 4, + .vtotal = 1440 + 20 + 4 + 12, + .vrefresh = 60, + .clock = 75276, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + .width_mm = 65, + .height_mm = 130, +}; + +static int jh057n_get_modes(struct drm_panel *panel) +{ + struct jh057n *ctx = panel_to_jh057n(panel); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(panel->drm, &default_mode); + if (!mode) { + DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u", + default_mode.hdisplay, default_mode.vdisplay, + default_mode.vrefresh); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + panel->connector->display_info.width_mm = mode->width_mm; + panel->connector->display_info.height_mm = mode->height_mm; + drm_mode_probed_add(panel->connector, mode); + + return 1; +} + +static const struct drm_panel_funcs jh057n_drm_funcs = { + .disable = jh057n_disable, + .unprepare = jh057n_unprepare, + .prepare = jh057n_prepare, + .enable = jh057n_enable, + .get_modes = jh057n_get_modes, +}; + +static int allpixelson_set(void *data, u64 val) +{ + struct jh057n *ctx = data; + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + + DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on"); + dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON); + msleep(val * 1000); + /* Reset the panel to get video back */ + drm_panel_disable(&ctx->panel); + drm_panel_unprepare(&ctx->panel); + drm_panel_prepare(&ctx->panel); + drm_panel_enable(&ctx->panel); + + return 0; +} + +DEFINE_SIMPLE_ATTRIBUTE(allpixelson_fops, NULL, + allpixelson_set, "%llu\n"); + +static int jh057n_debugfs_init(struct jh057n *ctx) +{ + struct dentry *f; + + ctx->debugfs = debugfs_create_dir(DRV_NAME, NULL); + if (!ctx->debugfs) + return -ENOMEM; + + f = debugfs_create_file("allpixelson", 0600, + ctx->debugfs, ctx, &allpixelson_fops); + if (!f) + return -ENOMEM; + + return 0; +} + +static void jh057n_debugfs_remove(struct jh057n *ctx) +{ + debugfs_remove_recursive(ctx->debugfs); + ctx->debugfs = NULL; +} + +static int jh057n_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct jh057n *ctx; + int ret; + + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); + if (IS_ERR(ctx->reset_gpio)) { + DRM_DEV_ERROR(dev, "cannot get reset gpio"); + return PTR_ERR(ctx->reset_gpio); + } + + mipi_dsi_set_drvdata(dsi, ctx); + + ctx->dev = dev; + + dsi->lanes = 4; + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_VIDEO_BURST | MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + + ctx->backlight = devm_of_find_backlight(dev); + if (IS_ERR(ctx->backlight)) + return PTR_ERR(ctx->backlight); + + drm_panel_init(&ctx->panel); + ctx->panel.dev = dev; + ctx->panel.funcs = &jh057n_drm_funcs; + + drm_panel_add(&ctx->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + DRM_DEV_ERROR(dev, "mipi_dsi_attach failed. Is host ready?"); + drm_panel_remove(&ctx->panel); + return ret; + } + + DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready", + default_mode.hdisplay, default_mode.vdisplay, + default_mode.vrefresh, + mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes); + + jh057n_debugfs_init(ctx); + return 0; +} + +static void jh057n_shutdown(struct mipi_dsi_device *dsi) +{ + struct jh057n *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = jh057n_unprepare(&ctx->panel); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n", + ret); + + ret = jh057n_disable(&ctx->panel); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n", + ret); +} + +static int jh057n_remove(struct mipi_dsi_device *dsi) +{ + struct jh057n *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + jh057n_shutdown(dsi); + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n", + ret); + + drm_panel_remove(&ctx->panel); + + jh057n_debugfs_remove(ctx); + + return 0; +} + +static const struct of_device_id jh057n_of_match[] = { + { .compatible = "rocktech,jh057n00900" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, jh057n_of_match); + +static struct mipi_dsi_driver jh057n_driver = { + .probe = jh057n_probe, + .remove = jh057n_remove, + .shutdown = jh057n_shutdown, + .driver = { + .name = DRV_NAME, + .of_match_table = jh057n_of_match, + }, +}; +module_mipi_dsi_driver(jh057n_driver); + +MODULE_AUTHOR("Guido Günther agx@sigxcpu.org"); +MODULE_DESCRIPTION("DRM driver for Rocktech JH057N00900 MIPI DSI panel"); +MODULE_LICENSE("GPL v2");