Updating the vblank counts requires register reads and these reads may not return meaningful values after the vblank interrupts are disabled as the device may go to low power state. An additional change would be to allow the driver to save the vblank counts before entering a low power state, but that's for the future.
Also, disable vblanks after reading the HW counter in the case where _crtc_vblank_off() is disabling vblanks.
Cc: Daniel Vetter daniel.vetter@ffwll.ch Cc: Ville Syrjälä ville.syrjala@linux.intel.com Cc: Rodrigo Vivi rodrigo.vivi@intel.com Signed-off-by: Dhinakaran Pandiyan dhinakaran.pandiyan@intel.com --- drivers/gpu/drm/drm_vblank.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-)
diff --git a/drivers/gpu/drm/drm_vblank.c b/drivers/gpu/drm/drm_vblank.c index 32d9bcf5be7f..7eee82c06ed8 100644 --- a/drivers/gpu/drm/drm_vblank.c +++ b/drivers/gpu/drm/drm_vblank.c @@ -347,23 +347,14 @@ void drm_vblank_disable_and_save(struct drm_device *dev, unsigned int pipe) spin_lock_irqsave(&dev->vblank_time_lock, irqflags);
/* - * Only disable vblank interrupts if they're enabled. This avoids - * calling the ->disable_vblank() operation in atomic context with the - * hardware potentially runtime suspended. - */ - if (vblank->enabled) { - __disable_vblank(dev, pipe); - vblank->enabled = false; - } - - /* - * Always update the count and timestamp to maintain the + * Update the count and timestamp to maintain the * appearance that the counter has been ticking all along until * this time. This makes the count account for the entire time * between drm_crtc_vblank_on() and drm_crtc_vblank_off(). */ drm_update_vblank_count(dev, pipe, false); - + __disable_vblank(dev, pipe); + vblank->enabled = false; spin_unlock_irqrestore(&dev->vblank_time_lock, irqflags); }
@@ -1122,8 +1113,12 @@ void drm_crtc_vblank_off(struct drm_crtc *crtc) pipe, vblank->enabled, vblank->inmodeset);
/* Avoid redundant vblank disables without previous - * drm_crtc_vblank_on(). */ - if (drm_core_check_feature(dev, DRIVER_ATOMIC) || !vblank->inmodeset) + * drm_crtc_vblank_on() and only disable them if they're enabled. This + * avoids calling the ->disable_vblank() operation in atomic context + * with the hardware potentially runtime suspended. + */ + if ((drm_core_check_feature(dev, DRIVER_ATOMIC) || !vblank->inmodeset) && + vblank->enabled) drm_vblank_disable_and_save(dev, pipe);
wake_up(&vblank->queue);