On Tue, Feb 27, 2018 at 11:11:09AM +0100, Linus Walleij wrote:
This fixes up the .mode_valid() vtable entry documentation by copyediting the documentation from the .mode_valid() documentation in the drm_modeset_helper_vtables.h file.
Fixes: 40275dc4edb4 ("drm: simple_kms_helper: Add mode_valid() callback support") Suggested-by: Daniel Vetter daniel.vetter@ffwll.ch Signed-off-by: Linus Walleij linus.walleij@linaro.org
Reviewed-by: Daniel Vetter daniel.vetter@ffwll.ch
include/drm/drm_simple_kms_helper.h | 27 ++++++++++++++++++++++++--- 1 file changed, 24 insertions(+), 3 deletions(-)
diff --git a/include/drm/drm_simple_kms_helper.h b/include/drm/drm_simple_kms_helper.h index d9e4c3c3f009..0d700a869cc8 100644 --- a/include/drm/drm_simple_kms_helper.h +++ b/include/drm/drm_simple_kms_helper.h @@ -24,9 +24,30 @@ struct drm_simple_display_pipe_funcs { /** * @mode_valid: *
* This function is called to filter out valid modes from the* suggestions suggested by the bridge or display. This optional* hook is passed in when initializing the pipeline.
* This callback is used to check if a specific mode is valid in the* crtc used in this simple display pipe. This should be implemented* if the display pipe has some sort of restriction in the modes* it can display. For example, a given display pipe may be responsible* to set a clock value. If the clock can not produce all the values* for the available modes then this callback can be used to restrict* the number of modes to only the ones that can be displayed. Another* reason can be bandwidth mitigation: the memory port on the display* controller can have bandwidth limitations not allowing pixel data* to be fetched at any rate.** This hook is used by the probe helpers to filter the mode list in* drm_helper_probe_single_connector_modes(), and it is used by the* atomic helpers to validate modes supplied by userspace in* drm_atomic_helper_check_modeset().** This function is optional.** NOTE:** Since this function is both called from the check phase of an atomic* commit, and the mode validation in the probe paths it is not allowed* to look at anything else but the passed-in mode, and validate it* against configuration-invariant hardware constraints.
- RETURNS:
-- 2.14.3
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel