From: Ville Syrjälä ville.syrjala@linux.intel.com
Add helpers to get the TMDS clock limits for HDMI/DVI downstream facing ports.
Signed-off-by: Ville Syrjälä ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_dp_helper.c | 116 ++++++++++++++++++++++++++++++++ include/drm/drm_dp_helper.h | 6 ++ 2 files changed, 122 insertions(+)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 0ae6849744c2..31ca550467ed 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -450,6 +450,114 @@ int drm_dp_downstream_max_dotclock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], } EXPORT_SYMBOL(drm_dp_downstream_max_dotclock);
+/** + * drm_dp_downstream_max_tmds_clock() - extract downstream facing port max TMDS clock + * @dpcd: DisplayPort configuration data + * @port_cap: port capabilities + * @edid: EDID + * + * Returns HDMI/DVI downstream facing port max TMDS clock in kHz on success, + * or 0 if max TMDS clock not defined + */ +int drm_dp_downstream_max_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid) +{ + if (!drm_dp_is_branch(dpcd)) + return 0; + + if (dpcd[DP_DPCD_REV] < 0x11) { + switch (dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_TYPE_MASK) { + case DP_DWN_STRM_PORT_TYPE_TMDS: + return 165000; + default: + return 0; + } + } + + switch (port_cap[0] & DP_DS_PORT_TYPE_MASK) { + case DP_DS_PORT_TYPE_DP_DUALMODE: + if (is_edid_digital_input_dp(edid)) + return 0; + /* + * It's left up to the driver to check the + * DP dual mode adapter's max TMDS clock. + * + * Unfortunatley it looks like branch devices + * may not fordward that the DP dual mode i2c + * access so we just usually get i2c nak :( + */ + /* fall through */ + case DP_DS_PORT_TYPE_HDMI: + /* + * We should perhaps assume 165 MHz when detailed cap + * info is not available. But looks like many typical + * branch devices fall into that category and so we'd + * probably end up with users complaining that they can't + * get high resolution modes with their favorite dongle. + * + * So let's limit to 300 MHz instead since DPCD 1.4 + * HDMI 2.0 DFPs are required to have the detailed cap + * info. So it's more likely we're dealing with a HDMI 1.4 + * compatible* device here. + */ + if ((dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DETAILED_CAP_INFO_AVAILABLE) == 0) + return 300000; + return port_cap[1] * 2500; + case DP_DS_PORT_TYPE_DVI: + if ((dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DETAILED_CAP_INFO_AVAILABLE) == 0) + return 165000; + /* FIXME what to do about DVI dual link? */ + return port_cap[1] * 2500; + default: + return 0; + } +} +EXPORT_SYMBOL(drm_dp_downstream_max_tmds_clock); + +/** + * drm_dp_downstream_min_tmds_clock() - extract downstream facing port min TMDS clock + * @dpcd: DisplayPort configuration data + * @port_cap: port capabilities + * @edid: EDID + * + * Returns HDMI/DVI downstream facing port min TMDS clock in kHz on success, + * or 0 if max TMDS clock not defined + */ +int drm_dp_downstream_min_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid) +{ + if (!drm_dp_is_branch(dpcd)) + return 0; + + if (dpcd[DP_DPCD_REV] < 0x11) { + switch (dpcd[DP_DOWNSTREAMPORT_PRESENT] & DP_DWN_STRM_PORT_TYPE_MASK) { + case DP_DWN_STRM_PORT_TYPE_TMDS: + return 25000; + default: + return 0; + } + } + + switch (port_cap[0] & DP_DS_PORT_TYPE_MASK) { + case DP_DS_PORT_TYPE_DP_DUALMODE: + if (is_edid_digital_input_dp(edid)) + return 0; + /* fall through */ + case DP_DS_PORT_TYPE_DVI: + case DP_DS_PORT_TYPE_HDMI: + /* + * Unclear whether the protocol converter could + * utilize pixel replication. Assume it won't. + */ + return 25000; + default: + return 0; + } +} +EXPORT_SYMBOL(drm_dp_downstream_min_tmds_clock); + /** * drm_dp_downstream_max_bpc() - extract downstream facing port max * bits per component @@ -595,6 +703,14 @@ void drm_dp_downstream_debug(struct seq_file *m, if (clk > 0) seq_printf(m, "\t\tMax dot clock: %d kHz\n", clk);
+ clk = drm_dp_downstream_max_tmds_clock(dpcd, port_cap, edid); + if (clk > 0) + seq_printf(m, "\t\tMax TMDS clock: %d kHz\n", clk); + + clk = drm_dp_downstream_min_tmds_clock(dpcd, port_cap, edid); + if (clk > 0) + seq_printf(m, "\t\tMin TMDS clock: %d kHz\n", clk); + bpc = drm_dp_downstream_max_bpc(dpcd, port_cap, edid);
if (bpc > 0) diff --git a/include/drm/drm_dp_helper.h b/include/drm/drm_dp_helper.h index 39c1faf7dede..89683a3a9af1 100644 --- a/include/drm/drm_dp_helper.h +++ b/include/drm/drm_dp_helper.h @@ -1482,6 +1482,12 @@ bool drm_dp_downstream_is_tmds(const u8 dpcd[DP_RECEIVER_CAP_SIZE], const struct edid *edid); int drm_dp_downstream_max_dotclock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], const u8 port_cap[4]); +int drm_dp_downstream_max_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); +int drm_dp_downstream_min_tmds_clock(const u8 dpcd[DP_RECEIVER_CAP_SIZE], + const u8 port_cap[4], + const struct edid *edid); int drm_dp_downstream_max_bpc(const u8 dpcd[DP_RECEIVER_CAP_SIZE], const u8 port_cap[4], const struct edid *edid);