The driver currently hard-codes HS/VS polarity to active-low and DE to active-high, which is not correct for a lot of supported DPI panels. Add the missing mode flag handling for HS/VS/DE polarity.
Signed-off-by: Marek Vasut marex@denx.de Cc: Jagan Teki jagan@amarulasolutions.com Cc: Robert Foss robert.foss@linaro.org Cc: Sam Ravnborg sam@ravnborg.org Cc: Thomas Zimmermann tzimmermann@suse.de To: dri-devel@lists.freedesktop.org --- drivers/gpu/drm/bridge/chipone-icn6211.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c index d6db1e77b5a35..3ad082c1d2bfd 100644 --- a/drivers/gpu/drm/bridge/chipone-icn6211.c +++ b/drivers/gpu/drm/bridge/chipone-icn6211.c @@ -190,7 +190,14 @@ static void chipone_atomic_enable(struct drm_bridge *bridge, struct chipone *icn = bridge_to_chipone(bridge); struct drm_atomic_state *state = old_bridge_state->base.state; const struct drm_display_mode *mode = bridge_to_mode(bridge, state); + const struct drm_bridge_state *bridge_state; u16 hfp, hbp, hsync; + u32 bus_flags; + u8 pol; + + /* Get the DPI flags from the bridge state. */ + bridge_state = drm_atomic_get_new_bridge_state(state, bridge); + bus_flags = bridge_state->output_bus_cfg.flags;
ICN6211_DSI(icn, MIPI_CFG_PW, MIPI_CFG_PW_CONFIG_DSI);
@@ -230,7 +237,13 @@ static void chipone_atomic_enable(struct drm_bridge *bridge, ICN6211_DSI(icn, HFP_MIN, hfp & 0xff); ICN6211_DSI(icn, MIPI_PD_CK_LANE, 0xa0); ICN6211_DSI(icn, PLL_CTRL(12), 0xff); - ICN6211_DSI(icn, BIST_POL, BIST_POL_DE_POL); + + /* DPI HS/VS/DE polarity */ + pol = ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? BIST_POL_HSYNC_POL : 0) | + ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? BIST_POL_VSYNC_POL : 0) | + ((bus_flags & DRM_BUS_FLAG_DE_HIGH) ? BIST_POL_DE_POL : 0); + ICN6211_DSI(icn, BIST_POL, pol); + ICN6211_DSI(icn, PLL_CTRL(6), PLL_CTRL_6_MIPI_CLK); ICN6211_DSI(icn, PLL_REF_DIV, 0x71); ICN6211_DSI(icn, PLL_INT(0), 0x2b);