For now just enable it in the probe function to allow i2c access. Disabling also means resetting the register values to default and according to the datasheet does not give power savings.
Tested on Kobo Clara HD.
Signed-off-by: Andreas Kemnade andreas@kemnade.info Reviewed-by: Dan Murphy dmurphy@ti.com Reviewed-by: Daniel Thompson daniel.thompson@linaro.org --- changes in v2: - simplification - correct gpio direction initialisation
changes in v3: - removed legacy include
drivers/video/backlight/lm3630a_bl.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c index 8f84f3684f04..d9e67b9b2571 100644 --- a/drivers/video/backlight/lm3630a_bl.c +++ b/drivers/video/backlight/lm3630a_bl.c @@ -12,6 +12,7 @@ #include <linux/uaccess.h> #include <linux/interrupt.h> #include <linux/regmap.h> +#include <linux/gpio/consumer.h> #include <linux/pwm.h> #include <linux/platform_data/lm3630a_bl.h>
@@ -48,6 +49,7 @@ struct lm3630a_chip { struct lm3630a_platform_data *pdata; struct backlight_device *bleda; struct backlight_device *bledb; + struct gpio_desc *enable_gpio; struct regmap *regmap; struct pwm_device *pwmd; }; @@ -535,6 +537,13 @@ static int lm3630a_probe(struct i2c_client *client, } pchip->pdata = pdata;
+ pchip->enable_gpio = devm_gpiod_get_optional(&client->dev, "enable", + GPIOD_OUT_HIGH); + if (IS_ERR(pchip->enable_gpio)) { + rval = PTR_ERR(pchip->enable_gpio); + return rval; + } + /* chip initialize */ rval = lm3630a_chip_init(pchip); if (rval < 0) {