From: Chris Morgan macromorgan@hotmail.com
This patch series is to add support for the MZP280 panel for the Raspberry Pi. This panel requires adding support for Mode 3 of the Raspberry Pi DPI connector, which necessitates a new media bus format.
This patch series has been tested on my Raspberry Pi 4 with version 1 of the panel in question.
Changes since V1:
- Added documentation for vendor string.
Signed-off-by: Chris Morgan macromorgan@hotmail.com
Chris Morgan (6): dt-bindings: vendor-prefixes: Add Geekworm media: uapi: Document format MEDIA_BUS_FMT_RGB565_1X24_CPADHI media: uapi: add MEDIA_BUS_FMT_RGB565_1X24_CPADHI dt-bindings: display: simple: add Geekworm MZP280 Panel drm/panel: simple: add Geekworm MZP280 Panel drm/vc4: dpi: Support DPI interface in mode3 for RGB565
.../bindings/display/panel/panel-simple.yaml | 2 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + .../media/v4l/subdev-formats.rst | 37 +++++++++++++++++++ drivers/gpu/drm/panel/panel-simple.c | 29 +++++++++++++++ drivers/gpu/drm/vc4/vc4_dpi.c | 4 ++ include/uapi/linux/media-bus-format.h | 3 +- 6 files changed, 76 insertions(+), 1 deletion(-)