Hi,
On 9/16/21 5:20 AM, Stephen Boyd wrote:
Quoting Hans de Goede (2021-08-17 14:52:01)
diff --git a/drivers/usb/typec/altmodes/displayport.c b/drivers/usb/typec/altmodes/displayport.c index aa669b9cf70e..c1d8c23baa39 100644 --- a/drivers/usb/typec/altmodes/displayport.c +++ b/drivers/usb/typec/altmodes/displayport.c @@ -125,6 +129,7 @@ static int dp_altmode_configure(struct dp_altmode *dp, u8 con) static int dp_altmode_status_update(struct dp_altmode *dp) { bool configured = !!DP_CONF_GET_PIN_ASSIGN(dp->data.conf);
bool hpd = !!(dp->data.status & DP_STATUS_HPD_STATE); u8 con = DP_STATUS_CONNECTION(dp->data.status); int ret = 0;@@ -137,6 +142,11 @@ static int dp_altmode_status_update(struct dp_altmode *dp) ret = dp_altmode_configure(dp, con); if (!ret) dp->state = DP_STATE_CONFIGURE;
} else {if (dp->hpd != hpd) {drm_connector_oob_hotplug_event(dp->connector_fwnode);dp->hpd = hpd;} } return ret;@@ -512,6 +522,7 @@ static const struct attribute_group dp_altmode_group = { int dp_altmode_probe(struct typec_altmode *alt) { const struct typec_altmode *port = typec_altmode_get_partner(alt);
struct fwnode_handle *fwnode; struct dp_altmode *dp; int ret;@@ -540,6 +551,11 @@ int dp_altmode_probe(struct typec_altmode *alt) alt->desc = "DisplayPort"; alt->ops = &dp_altmode_ops;
fwnode = dev_fwnode(alt->dev.parent->parent); /* typec_port fwnode */dp->connector_fwnode = fwnode_find_reference(fwnode, "displayport", 0);I'm trying to figure out how to translate this over to DT bindings.
First of all let me say that it is great that people are looking into using this functionality outside of the niche application for which I wrote it.
Is there a binding document for this fwnode reference? If not, can you please update Documentation/devicetree/bindings/connector/usb-connector.yaml with this property?
My use case is some Intel Cherry Trail based mini-laptops which use a Intel Whiskey Cove PMIC with a FUSB302 Type-C controller + a PI3USB30532 USB switch, specifically the GPD Win and GPD Pocket (first generation of each).
These are ACPI/X86 devices so devicetree is not used there, the connector_fwnode checked here is actually sw_node, this sw_node reference gets setup here:
drivers/platform/x86/intel/int33fe/intel_cht_int33fe_typec.c
The setup/use of a sw_node reference for this was actually designed by Heikki (in the Cc already), so he might be a better person to answer your questions.
With that said, as to your question if I can document this in usb-connector.yaml, no I cannot (sorry). Since this is a sw_node setup by X86 code and not a normal devicetree fwnode reference, atm this is purely a kernel internal API/binding really and the DT-binding maintainers have repeatedly told me that I should NOT submit DT-binding updates for these. Only once a real devicetree user for this shows up will the accept DT-bindings patches for this.
The good news here though is, that if this turns out to be non-ideal for the devicetree case we can still change things as long as drivers/platform/x86/intel/int33fe/intel_cht_int33fe_typec.c also gets updated so as to not break things.
I think this means that the type-c node would have a 'displayport = <&some_phandle>' property in it that points to the display port hardware device that's pumping out the DisplayPort data?
It points to a fwnode belonging to the drm-connector for the DisplayPort connector/pins to which the Type-C data-lines mux/switch is connected, see:
https://cgit.freedesktop.org/drm-misc/commit/?id=48c429c6d18db115c277b750001... https://cgit.freedesktop.org/drm-misc/commit/?id=3d3f7c1e68691574c1d87cd0f9f... https://cgit.freedesktop.org/drm-intel/commit/?id=a481d0e80eabbc3fed66610374...
So this get working with devicetree you would need something like this:
1. Have devicetree-node-s describing video-output connectors, similar to how we have usb-connector nodes to describe usb-connectors
2. Have your drm/kms driver lookup these video-output-connector of_node-s and assign them to drm_connector.fwnode, at least for the DP video-output used.
3. Have the usb-connector node for your Type-C connector (the same of_node as which has the source-pdos, sink-pdos, etc props) have a 'displayport = <&some_phandle>' property pointing to the of_node for the DP video-output used.
I hope this helps.
if (IS_ERR(dp->connector_fwnode))dp->connector_fwnode = NULL;typec_altmode_set_drvdata(alt, dp); dp->state = DP_STATE_ENTER;@@ -555,6 +571,13 @@ void dp_altmode_remove(struct typec_altmode *alt)
sysfs_remove_group(&alt->dev.kobj, &dp_altmode_group); cancel_work_sync(&dp->work);
if (dp->connector_fwnode) {if (dp->hpd)drm_connector_oob_hotplug_event(dp->connector_fwnode);I was hoping that we could make a type-c connector into a drm_bridge. I'm thinking that it would be a DP-to-panel bridge. Then a panel could be created as well on the end of the type-c connector and the bridge would report hpd whenever the type-c logic figures out the cable has been connected and hpd is asserted. The actual DisplayPort hardware that's encoding data would then find the bridge through the graph binding connected to the output node.
I'm not sure how MST is handled though. In that scenario maybe there's more than one panel?
Yeah, given that MST over DP over Type-C is very much possible my first instinct is that this drm_bridge + bridge-to-panel idea is not going to work very well. Also the output could be anything, it could be a projector, or the DP input of a video-grabber, or ... so modelling this as a panel feels wrong.
Regards,
Hans