Re: [PATCH v14 2/2] dt-bindings: drm/bridge: Document sn65dsi86 bridge bindings

On Mon, Jul 16, 2018 at 02:13:30PM +0530, Sandeep Panda wrote:

Document the bindings used for the sn65dsi86 DSI to eDP bridge.

Changes in v1:

• Rephrase the dt-binding descriptions to be more inline with existing bindings (Andrzej Hajda).
• Add missing dt-binding that are parsed by corresponding driver (Andrzej Hajda).

Changes in v2:

• Remove edp panel specific dt-binding entries. Only keep bridge specific entries (Sean Paul).
• Remove custom-modes dt entry since its usage is removed from driver also (Sean Paul).
• Remove is-pluggable dt entry since this will not be needed anymore (Sean Paul).

Changes in v3:

• Remove irq-gpio dt entry and instead populate is an interrupt property (Rob Herring).

Changes in v4:

• Add link to bridge chip datasheet (Stephen Boyd)
• Add vpll and vcc regulator supply bindings (Stephen Boyd)
• Add ref clk optional dt binding (Stephen Boyd)
• Add gpio-controller optional dt binding (Stephen Boyd)

Changes in v5:

• Use clock property to specify the input refclk (Stephen Boyd).
• Update gpio cell and pwm cell numbers (Stephen Boyd).

Changes in v6:

• Add property to mention the lane mapping scheme and polarity inversion (Stephen Boyd).

Changes in v7:

• Detail description of lane mapping scheme dt property (Andrzej Hajda/ Rob Herring).
• Removed HDP gpio binding, since the bridge uses IRQ signal to determine HPD, and IRQ property is already documented in binding.

Changes in v8:

• Removed unnecessary explanation of lane mapping and polarity dt property, since these are already explained in media/video-interface dt binidng (Rob Herring).

Changes in v9:

• Avoid putting re-definition of lane mapping and polarity dt binding (Rob Herring).

Changes in v10:

• Use interrupts-extended property instead of interrupts to specify interrupt line (Andrzej Hajda).
• Move data-lanes and lane-polarity property example to proper place (Andrzej Hajda).

Changes in v11:

• Add a property for suspend gpio function of GPIO1 pin on bridge chip (Stephen Boyd).

Changes in v12:

• Remove binding for dedicated DDC line (Andrzej Hajda).

Signed-off-by: Sandeep Panda spanda@codeaurora.org

.../bindings/display/bridge/ti,sn65dsi86.txt | 87 ++++++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.txt

Reviewed-by: Rob Herring robh@kernel.org