So this is a cold-coded attempt to move the TI nspire over to using DRM. It is more or less the last user of the old fbdev driver so it is a noble cause and interesting usecase.
This can be applied on top of a vanilla Torvalds v5.3-rc1 kernel out since sunday.
I do not expect these patches to "just work", I expect them to need some hacking, so someone who is actually working on the hardware will need to step in and fix it up.
It does outline the overall idea of how to do this.
I found no defconfig for nspire in the kernel so I used ARMv4t multi.
Configuring the driver for nspire:
- Disable CONFIG_FB_ARMCLCD - Enable CONFIG_DRM_PL111, CONFIG_DRM_PANEL_SIMPLE
Hacker notes for nspire:
- I don't know which PrimeCell ID this hardware has, I hope the amba_id mask in drivers/gpu/drm/pl111/pl111_drv.c for PL111 and PL110 will match it. Please confirm that you get a clean probe call, else report what ID this has.
- The 24bit RGB frame buffer may be a bit much for the PL111 in the TI nspire to handle. Try editing the .fb_bpp in drivers/gpu/drm/pl111/pl111_drv.c down to 16 if this is the PL111 variant. If it is the PL110 variant, we will get 16 buts framebuffer anyway.
- I have hard-coded the panels to 1MHz, based on the fact that the AHB clock into the CLCD appears to be 48 MHz and the hard-coded TIM2 value for the classic means "divide by 48" and this seems to want the clock freq divided down to 1MHz. Verify this by adding prints inside drivers/gpu/drm/pl111/pl111_display.c in the function pl111_clk_div_set_rate() to verify that the divider gets set to 48 in TIM2_PCD_HI and TIM2_PCD_LO. TIM2_PCD_LO bits 0..4 = 10000 and TIM2_PCD_HI bits 27..31 = 00001 in that register.
Please test and fix, if you can.
Linus Walleij (3): RFT: drm/pl111: Support grayscale RTF: drm/panel: simple: Add TI nspire panels RFT: ARM: nspire: Move CLCD set-up to device tree
arch/arm/boot/dts/nspire-classic.dtsi | 19 ++++- arch/arm/boot/dts/nspire-cx.dts | 18 +++- arch/arm/boot/dts/nspire.dtsi | 10 ++- arch/arm/mach-nspire/Makefile | 1 - arch/arm/mach-nspire/clcd.c | 114 -------------------------- arch/arm/mach-nspire/clcd.h | 10 --- arch/arm/mach-nspire/nspire.c | 25 ------ drivers/gpu/drm/panel/panel-simple.c | 63 ++++++++++++++ drivers/gpu/drm/pl111/pl111_display.c | 28 ++++++- include/linux/amba/clcd-regs.h | 1 + 10 files changed, 133 insertions(+), 156 deletions(-) delete mode 100644 arch/arm/mach-nspire/clcd.c delete mode 100644 arch/arm/mach-nspire/clcd.h