Hi Bartosz,
Thank you for the patch.
On Wednesday 07 Dec 2016 11:42:44 Bartosz Golaszewski wrote:
Add the vga-bridge node to the board DT together with corresponding ports and vga connector. This allows to retrieve the edid info from the display automatically.
Signed-off-by: Bartosz Golaszewski bgolaszewski@baylibre.com
arch/arm/boot/dts/da850-lcdk.dts | 67 ++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index afcb482..39602eb 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -51,6 +51,51 @@ system-clock-frequency = <24576000>; }; };
- vga-bridge {
compatible = "ti,ths8135";#address-cells = <1>;#size-cells = <0>;ports {#address-cells = <1>;#size-cells = <0>;port@0 {#address-cells = <1>;#size-cells = <0>;reg = <0>;vga_bridge_in: endpoint@0 {reg = <0>;remote-endpoint = <&lcdc_out_vga>;};};port@1 {#address-cells = <1>;#size-cells = <0>;reg = <1>;vga_bridge_out: endpoint@0 {reg = <0>;remote-endpoint = <&vga_con_in>;};};};- };
- vga {
compatible = "vga-connector";ddc-i2c-bus = <&i2c0>;port {vga_con_in: endpoint {remote-endpoint = <&vga_bridge_out>;};};- };
};
&pmx_core { @@ -236,3 +281,25 @@ &memctrl { status = "okay"; };
+&lcdc {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&lcd_pins>;
- ports {
#address-cells = <1>;#size-cells = <0>;lcdc_out: port@1 {#address-cells = <1>;#size-cells = <0>;reg = <1>;lcdc_out_vga: endpoint@0 {reg = <0>;remote-endpoint = <&vga_bridge_in>;};};
Just to make sure you're aware, when there's a single endpoint you can simplify the DT by omitting the endpoint number. This would become
lcdc_out: port@1 { reg = <1>;
lcdc_out_vga: endpoint { remote-endpoint = <&vga_bridge_in>; }; };
It's entirely up to you, both get my
Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com
- };
+};