Hi Neil and Jonas,
Thank you for the patch.
On Thu, Feb 06, 2020 at 08:18:24PM +0100, Neil Armstrong wrote:
From: Jonas Karlman jonas@kwiboo.se
Configure the correct mtmdsclock for deep colors to prepare support for 10, 12 & 16bit output.
Signed-off-by: Jonas Karlman jonas@kwiboo.se Signed-off-by: Neil Armstrong narmstrong@baylibre.com
drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)
diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c index 67fca439bbfb..9e0927d22db6 100644 --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c @@ -1818,9 +1818,26 @@ static void hdmi_av_composer(struct dw_hdmi *hdmi,
dev_dbg(hdmi->dev, "final pixclk = %d\n", vmode->mpixelclock);
Nitpicking a bit, I would change
- vmode->mtmdsclock = vmode->mpixelclock = mode->clock * 1000; + vmode->mpixelclock = mode->clock * 1000;
above, and here add
vmode->mtmdsclock = vmode->mpixelclock;
to keep all mtmdsclock calculation in a single place.
- if (!hdmi_bus_fmt_is_yuv422(hdmi->hdmi_data.enc_out_bus_format)) {
switch (hdmi_bus_fmt_color_depth(
hdmi->hdmi_data.enc_out_bus_format)) {
case 16:
vmode->mtmdsclock = (u64)vmode->mpixelclock * 2;
Both mpixelclock and mtmdsclock are unsigned int. Is the cast to u64 needed ?
On a separate but related note, what does the 'm' in tmdsclock stand for ? It seems to originate from the 'm' prefix for mpixelclock, which has been there from the start. Unless there's a good reason for the prefix, renaming mtmdsclock to tmds_clock (and handling the other fields in the hdmi_vmode structure similarly) would increase clarity I think.
break;
case 12:
vmode->mtmdsclock = (u64)vmode->mpixelclock * 3 / 2;
break;
case 10:
vmode->mtmdsclock = (u64)vmode->mpixelclock * 5 / 4;
break;
}
}
if (hdmi_bus_fmt_is_yuv420(hdmi->hdmi_data.enc_out_bus_format)) vmode->mtmdsclock /= 2;
dev_dbg(hdmi->dev, "final tmdsclk = %d\n", vmode->mtmdsclock);
s/tmdsclk/tmdsclock/ to match the field name ?
- /* Set up HDMI_FC_INVIDCONF */ inv_val = (hdmi->hdmi_data.hdcp_enable || (dw_hdmi_support_scdc(hdmi) &&