Re: [PATCH v2 6/8] dt-bindings: usb: convert mediatek,mtk-xhci.txt to YAML schema

On Tue, Oct 13, 2020 at 04:52:05PM +0800, Chunfeng Yun wrote:

Convert mediatek,mtk-xhci.txt to YAML schema mediatek,mtk-xhci.yaml

There's some refactoring of usb-hcd.yaml and XHCI schema under review and this may need some refactoring on top of it.

Signed-off-by: Chunfeng Yun chunfeng.yun@mediatek.com

v2: new patch

.../bindings/usb/mediatek,mtk-xhci.txt | 121 ------------ .../bindings/usb/mediatek,mtk-xhci.yaml | 180 ++++++++++++++++++ 2 files changed, 180 insertions(+), 121 deletions(-) delete mode 100644 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt create mode 100644 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml new file mode 100644 index 000000000000..ea696c8f1269 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2020 MediaTek +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/usb/mediatek,mtk-xhci.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml#

+title: MediaTek USB3 xHCI Device Tree Bindings

+maintainers:

• • Chunfeng Yun chunfeng.yun@mediatek.com

+allOf:

• • $ref: "usb-hcd.yaml"

+description: |

• There are two scenarios:
• case 1: only supports xHCI driver;
• case 2: supports dual-role mode, and the host is based on xHCI driver.

+properties:

• #common properties for both case 1 and case 2
• compatible:
• items:

•  - enum:
  

•      - mediatek,mt2712-xhci
  

•      - mediatek,mt7622-xhci
  

•      - mediatek,mt7629-xhci
  

•      - mediatek,mt8173-xhci
  

•      - mediatek,mt8183-xhci
  

•  - const: mediatek,mtk-xhci
  

• reg:
• minItems: 1
• maxItems: 2
• items:

•  - description: the registers of xHCI MAC
  

•  - description: the registers of IP Port Control
  

• reg-names:
• minItems: 1
• maxItems: 2
• items:

•  - const: mac
  

•  - const: ippc  #optional, only needed for case 1.
  

• interrupts:
• maxItems: 1
• power-domains:
• description: A phandle to USB power domain node to control USB's MTCMOS
• maxItems: 1
• clocks:
• minItems: 1
• maxItems: 5
• items:

•  - description: Controller clock used by normal mode
  

•  - description: Reference clock used by low power mode etc
  

•  - description: Mcu bus clock for register access
  

•  - description: DMA bus clock for data transfer
  

•  - description: controller clock
  

• clock-names:
• minItems: 1
• maxItems: 5
• items:

•  - const: sys_ck  #required, the following ones are optional
  

•  - const: ref_ck
  

•  - const: mcu_ck
  

•  - const: dma_ck
  

•  - const: xhci_ck
  

• phys:
• $ref: /usb/usb-hcd.yaml#

That doesn't look right...

• vusb33-supply:
• description: Regulator of USB AVDD3.3v
• vbus-supply:
• description: Regulator of USB VBUS5v
• usb3-lpm-capable:
• description: supports USB3.0 LPM
• type: boolean
• imod-interval-ns:
• $ref: /schemas/types.yaml#/definitions/uint32
• description: |

•  Interrupt moderation interval value, it is 8 times as much as that
  

•  defined in the xHCI spec on MTK's controller.
  

• default: 5000
• #the following properties are only used for case 1
• pinctrl-0:
• description: A phandle to the default pinctrl state.
• pinctrl-names:
• description: A pinctrl state named "default" must be defined.

•  See pinctrl/pinctrl-bindings.txt
  

• const: default

Don't need pinctrl-* properties. They are always allowed.

• wakeup-source:
• description: enable USB remote wakeup, see power/wakeup-source.txt
• type: boolean
• mediatek,syscon-wakeup:
• $ref: /schemas/types.yaml#/definitions/phandle-array
• maxItems: 1
• description: |

•  A phandle to syscon used to access the register of the USB wakeup glue
  

•  layer between xHCI and SPM, the field should always be a multiple of
  

•  3 cells long.
  

A multiple of 3? How would there be more than 3 cells?

•  items:
  

•    - description:
  

•        The first cell represents a phandle to syscon
  

•    - description:
  

•        The second cell represents the register base address of the glue
  

•        layer in syscon
  

•    - description:
  

•        The third cell represents the hardware version of the glue layer,
  

•        1 is used by mt8173 etc, 2 is used by mt2712 etc
  

•      enum: [1, 2]
  

• mediatek,u3p-dis-msk:
• $ref: /schemas/types.yaml#/definitions/uint32
• description: The mask to disable u3ports, bit0 for u3port0,

•  bit1 for u3port1, ... etc
  

• "#address-cells":
• const: 1
• "#size-cells":
• const: 0

+patternProperties:

• "^[a-f]+@[0-9a-f]+$":
• $ref: /usb/usb-hcd.yaml#
• type: object
• description: The hard wired USB devices.

+dependencies:

• wakeup-source: [ 'mediatek,syscon-wakeup' ]

+required:

• • compatible
• • reg
• • reg-names
• • interrupts
• • clocks
• • clock-names

+additionalProperties: false

+examples:

• • |
• #include <dt-bindings/clock/mt8173-clk.h>
• #include <dt-bindings/interrupt-controller/arm-gic.h>
• #include <dt-bindings/interrupt-controller/irq.h>
• #include <dt-bindings/phy/phy.h>
• #include <dt-bindings/power/mt8173-power.h>
• usb3: usb@11270000 {

•    compatible = "mediatek,mt8173-xhci", "mediatek,mtk-xhci";
  

•    reg = <0x11270000 0x1000>, <0x11280700 0x0100>;
  

•    reg-names = "mac", "ippc";
  

•    interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_LOW>;
  

•    power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>;
  

•    clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>;
  

•    clock-names = "sys_ck", "ref_ck";
  

•    phys = <&u3port0 PHY_TYPE_USB3>, <&u2port1 PHY_TYPE_USB2>;
  

•    vusb33-supply = <&mt6397_vusb_reg>;
  

•    vbus-supply = <&usb_p1_vbus>;
  

•    imod-interval-ns = <10000>;
  

•    mediatek,syscon-wakeup = <&pericfg 0x400 1>;
  

•    wakeup-source;
  

•    usb3-lpm-capable;
  

• };

+...

2.18.0