The only real platform with DISPLAY_VER == 10 is GLK, so we don't need any checks and supporting code for CNL. Remove code and rename functions/macros accordingly.
Signed-off-by: Lucas De Marchi lucas.demarchi@intel.com --- drivers/gpu/drm/i915/display/intel_cdclk.c | 72 +++++----------------- drivers/gpu/drm/i915/i915_reg.h | 4 +- 2 files changed, 18 insertions(+), 58 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c index ff35c29508d5..34fa4130d5c4 100644 --- a/drivers/gpu/drm/i915/display/intel_cdclk.c +++ b/drivers/gpu/drm/i915/display/intel_cdclk.c @@ -1195,17 +1195,6 @@ static const struct intel_cdclk_vals glk_cdclk_table[] = { {} };
-static const struct intel_cdclk_vals cnl_cdclk_table[] = { - { .refclk = 19200, .cdclk = 168000, .divider = 4, .ratio = 35 }, - { .refclk = 19200, .cdclk = 336000, .divider = 2, .ratio = 35 }, - { .refclk = 19200, .cdclk = 528000, .divider = 2, .ratio = 55 }, - - { .refclk = 24000, .cdclk = 168000, .divider = 4, .ratio = 28 }, - { .refclk = 24000, .cdclk = 336000, .divider = 2, .ratio = 28 }, - { .refclk = 24000, .cdclk = 528000, .divider = 2, .ratio = 44 }, - {} -}; - static const struct intel_cdclk_vals icl_cdclk_table[] = { { .refclk = 19200, .cdclk = 172800, .divider = 2, .ratio = 18 }, { .refclk = 19200, .cdclk = 192000, .divider = 2, .ratio = 20 }, @@ -1339,16 +1328,6 @@ static u8 bxt_calc_voltage_level(int cdclk) return DIV_ROUND_UP(cdclk, 25000); }
-static u8 cnl_calc_voltage_level(int cdclk) -{ - if (cdclk > 336000) - return 2; - else if (cdclk > 168000) - return 1; - else - return 0; -} - static u8 icl_calc_voltage_level(int cdclk) { if (cdclk > 556800) @@ -1383,15 +1362,6 @@ static u8 tgl_calc_voltage_level(int cdclk) return 0; }
-static void cnl_readout_refclk(struct drm_i915_private *dev_priv, - struct intel_cdclk_config *cdclk_config) -{ - if (intel_de_read(dev_priv, SKL_DSSM) & CNL_DSSM_CDCLK_PLL_REFCLK_24MHz) - cdclk_config->ref = 24000; - else - cdclk_config->ref = 19200; -} - static void icl_readout_refclk(struct drm_i915_private *dev_priv, struct intel_cdclk_config *cdclk_config) { @@ -1422,8 +1392,6 @@ static void bxt_de_pll_readout(struct drm_i915_private *dev_priv, cdclk_config->ref = 38400; else if (DISPLAY_VER(dev_priv) >= 11) icl_readout_refclk(dev_priv, cdclk_config); - else if (IS_CANNONLAKE(dev_priv)) - cnl_readout_refclk(dev_priv, cdclk_config); else cdclk_config->ref = 19200;
@@ -1439,11 +1407,11 @@ static void bxt_de_pll_readout(struct drm_i915_private *dev_priv, }
/* - * CNL+ have the ratio directly in the PLL enable register, gen9lp had - * it in a separate PLL control register. + * DISPLAY_VER >= 11 have the ratio directly in the PLL enable register, + * gen9lp had it in a separate PLL control register. */ - if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) - ratio = val & CNL_CDCLK_PLL_RATIO_MASK; + if (DISPLAY_VER(dev_priv) >= 11) + ratio = val & ICL_CDCLK_PLL_RATIO_MASK; else ratio = intel_de_read(dev_priv, BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
@@ -1530,7 +1498,7 @@ static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco) dev_priv->cdclk.hw.vco = vco; }
-static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv) +static void icl_cdclk_pll_disable(struct drm_i915_private *dev_priv) { intel_de_rmw(dev_priv, BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE, 0); @@ -1542,12 +1510,12 @@ static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv) dev_priv->cdclk.hw.vco = 0; }
-static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco) +static void icl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco) { int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref); u32 val;
- val = CNL_CDCLK_PLL_RATIO(ratio); + val = ICL_CDCLK_PLL_RATIO(ratio); intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
val |= BXT_DE_PLL_PLL_ENABLE; @@ -1566,7 +1534,7 @@ static void adlp_cdclk_pll_crawl(struct drm_i915_private *dev_priv, int vco) u32 val;
/* Write PLL ratio without disabling */ - val = CNL_CDCLK_PLL_RATIO(ratio) | BXT_DE_PLL_PLL_ENABLE; + val = ICL_CDCLK_PLL_RATIO(ratio) | BXT_DE_PLL_PLL_ENABLE; intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
/* Submit freq change request */ @@ -1635,7 +1603,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv, int ret;
/* Inform power controller of upcoming frequency change. */ - if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) + if (DISPLAY_VER(dev_priv) >= 11) ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL, SKL_CDCLK_PREPARE_FOR_CHANGE, SKL_CDCLK_READY_FOR_CHANGE, @@ -1659,13 +1627,13 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv, if (HAS_CDCLK_CRAWL(dev_priv) && dev_priv->cdclk.hw.vco > 0 && vco > 0) { if (dev_priv->cdclk.hw.vco != vco) adlp_cdclk_pll_crawl(dev_priv, vco); - } else if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) { + } else if (DISPLAY_VER(dev_priv) >= 11) { if (dev_priv->cdclk.hw.vco != 0 && dev_priv->cdclk.hw.vco != vco) - cnl_cdclk_pll_disable(dev_priv); + icl_cdclk_pll_disable(dev_priv);
if (dev_priv->cdclk.hw.vco != vco) - cnl_cdclk_pll_enable(dev_priv, vco); + icl_cdclk_pll_enable(dev_priv, vco); } else { if (dev_priv->cdclk.hw.vco != 0 && dev_priv->cdclk.hw.vco != vco) @@ -1691,7 +1659,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv, if (pipe != INVALID_PIPE) intel_wait_for_vblank(dev_priv, pipe);
- if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) { + if (DISPLAY_VER(dev_priv) >= 11) { ret = sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL, cdclk_config->voltage_level); } else { @@ -1716,7 +1684,7 @@ static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
intel_update_cdclk(dev_priv);
- if (DISPLAY_VER(dev_priv) >= 11 || IS_CANNONLAKE(dev_priv)) + if (DISPLAY_VER(dev_priv) >= 11) /* * Can't read out the voltage level :( * Let's just assume everything is as expected. @@ -2125,7 +2093,7 @@ int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state) crtc_state->port_clock >= 540000 && crtc_state->lane_count == 4) { if (DISPLAY_VER(dev_priv) == 10) { - /* Display WA #1145: glk,cnl */ + /* Display WA #1145: glk */ min_cdclk = max(316800, min_cdclk); } else if (DISPLAY_VER(dev_priv) == 9 || IS_BROADWELL(dev_priv)) { /* Display WA #1144: skl,bxt */ @@ -2246,7 +2214,7 @@ static int intel_compute_min_cdclk(struct intel_cdclk_state *cdclk_state)
/* * Account for port clock min voltage level requirements. - * This only really does something on CNL+ but can be + * This only really does something on DISPLA_VER >= 11 but can be * called on earlier platforms as well. * * Note that this functions assumes that 0 is @@ -2660,8 +2628,6 @@ void intel_update_max_cdclk(struct drm_i915_private *dev_priv) dev_priv->max_cdclk_freq = 648000; else dev_priv->max_cdclk_freq = 652800; - } else if (IS_CANNONLAKE(dev_priv)) { - dev_priv->max_cdclk_freq = 528000; } else if (IS_GEMINILAKE(dev_priv)) { dev_priv->max_cdclk_freq = 316800; } else if (IS_BROXTON(dev_priv)) { @@ -2925,12 +2891,6 @@ void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv) dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk; dev_priv->display.calc_voltage_level = icl_calc_voltage_level; dev_priv->cdclk.table = icl_cdclk_table; - } else if (IS_CANNONLAKE(dev_priv)) { - dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk; - dev_priv->display.set_cdclk = bxt_set_cdclk; - dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk; - dev_priv->display.calc_voltage_level = cnl_calc_voltage_level; - dev_priv->cdclk.table = cnl_cdclk_table; } else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) { dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk; dev_priv->display.set_cdclk = bxt_set_cdclk; diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 8e1392028184..6a894ffd91e1 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -11016,8 +11016,8 @@ enum skl_power_gate { #define BXT_DE_PLL_LOCK (1 << 30) #define BXT_DE_PLL_FREQ_REQ (1 << 23) #define BXT_DE_PLL_FREQ_REQ_ACK (1 << 22) -#define CNL_CDCLK_PLL_RATIO(x) (x) -#define CNL_CDCLK_PLL_RATIO_MASK 0xff +#define ICL_CDCLK_PLL_RATIO(x) (x) +#define ICL_CDCLK_PLL_RATIO_MASK 0xff
/* GEN9 DC */ #define DC_STATE_EN _MMIO(0x45504)