This patch calls functions to check FRL training requirements for an HDMI2.1 sink, when connected through PCON. The call is made before the DP link training. In case FRL is not required or failure during FRL training, the TMDS mode is selected for the pcon.
v2: moved check_frl_training() just after FEC READY, before starting DP link training.
v3: rebase
Signed-off-by: Ankit Nautiyal ankit.k.nautiyal@intel.com Reviewed-by: Uma Shankar uma.shankar@intel.com --- drivers/gpu/drm/i915/display/intel_ddi.c | 2 ++ drivers/gpu/drm/i915/display/intel_dp.c | 2 ++ 2 files changed, 4 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index 6863236df1d0..3ff8b18f1997 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -3652,6 +3652,8 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state, */ intel_dp_sink_set_fec_ready(intel_dp, crtc_state);
+ intel_dp_check_frl_training(intel_dp, crtc_state); + /* * 7.i Follow DisplayPort specification training sequence (see notes for * failure handling) diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 2aa07d82bc97..f8f82fe8c52a 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -4283,6 +4283,7 @@ static void intel_enable_dp(struct intel_atomic_state *state,
intel_dp_set_power(intel_dp, DP_SET_POWER_D0); intel_dp_configure_protocol_converter(intel_dp); + intel_dp_check_frl_training(intel_dp, pipe_config); intel_dp_start_link_train(intel_dp, pipe_config); intel_dp_stop_link_train(intel_dp, pipe_config);
@@ -6204,6 +6205,7 @@ int intel_dp_retrain_link(struct intel_encoder *encoder, !intel_dp_mst_is_master_trans(crtc_state)) continue;
+ intel_dp_check_frl_training(intel_dp, crtc_state); intel_dp_start_link_train(intel_dp, crtc_state); intel_dp_stop_link_train(intel_dp, crtc_state); break;