Since it apparently caused some confusion on various websites, maybe we should change the title of the patch to "Enable 5th port" to make it more clear that this is only a port, not a pipe.
Also, I believe one last line that we need to add to this patch is an intel_ddi_init() call for TC1 in the intel_setup_outputs() function. I think I previously had that in a separate patch, but it went missing when we reorganized and refactored some of these patches
Matt
On Tue, Feb 15, 2022 at 11:21:52AM +0530, Ramalingam C wrote:
From: Matt Roper matthew.d.roper@intel.com
DG2 supports a 5th display output which the hardware refers to as "TC1," even though it isn't a Type-C output. This behaves similarly to the TC1 on past platforms with just a couple minor differences:
- DG2's TC1 bit in SDEISR is at bit 25 rather than 24 as it is on ICP/TGP/ADP.
- DG2 doesn't need the hpd inversion setting that we had to use on DG1
Cc: Swathi Dhanavanthri swathi.dhanavanthri@intel.com Cc: Lucas De Marchi lucas.demarchi@intel.com Cc: José Roberto de Souza jose.souza@intel.com Signed-off-by: Matt Roper matthew.d.roper@intel.com Signed-off-by: Ramalingam C ramalingam.c@intel.com
drivers/gpu/drm/i915/display/intel_gmbus.c | 16 ++++++++++++++-- drivers/gpu/drm/i915/i915_irq.c | 5 ++++- drivers/gpu/drm/i915/i915_reg.h | 1 + 3 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/i915/display/intel_gmbus.c b/drivers/gpu/drm/i915/display/intel_gmbus.c index 6ce8c10fe975..2fad03250661 100644 --- a/drivers/gpu/drm/i915/display/intel_gmbus.c +++ b/drivers/gpu/drm/i915/display/intel_gmbus.c @@ -98,11 +98,21 @@ static const struct gmbus_pin gmbus_pins_dg1[] = { [GMBUS_PIN_4_CNP] = { "dpd", GPIOE }, };
+static const struct gmbus_pin gmbus_pins_dg2[] = {
- [GMBUS_PIN_1_BXT] = { "dpa", GPIOB },
- [GMBUS_PIN_2_BXT] = { "dpb", GPIOC },
- [GMBUS_PIN_3_BXT] = { "dpc", GPIOD },
- [GMBUS_PIN_4_CNP] = { "dpd", GPIOE },
- [GMBUS_PIN_9_TC1_ICP] = { "tc1", GPIOJ },
+};
/* pin is expected to be valid */ static const struct gmbus_pin *get_gmbus_pin(struct drm_i915_private *dev_priv, unsigned int pin) {
- if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
- if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG2)
return &gmbus_pins_dg2[pin];- else if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1) return &gmbus_pins_dg1[pin]; else if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) return &gmbus_pins_icp[pin];
@@ -123,7 +133,9 @@ bool intel_gmbus_is_valid_pin(struct drm_i915_private *dev_priv, { unsigned int size;
- if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
- if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG2)
size = ARRAY_SIZE(gmbus_pins_dg2);- else if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1) size = ARRAY_SIZE(gmbus_pins_dg1); else if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP) size = ARRAY_SIZE(gmbus_pins_icp);
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index fdd568ba4a16..4d81063b128c 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -179,6 +179,7 @@ static const u32 hpd_sde_dg1[HPD_NUM_PINS] = { [HPD_PORT_B] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_B), [HPD_PORT_C] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_C), [HPD_PORT_D] = SDE_DDI_HOTPLUG_ICP(HPD_PORT_D),
- [HPD_PORT_TC1] = SDE_TC_HOTPLUG_DG2(HPD_PORT_TC1),
};
static void intel_hpd_init_pins(struct drm_i915_private *dev_priv) @@ -4424,7 +4425,9 @@ void intel_irq_init(struct drm_i915_private *dev_priv) if (I915_HAS_HOTPLUG(dev_priv)) dev_priv->hotplug_funcs = &i915_hpd_funcs; } else {
if (HAS_PCH_DG1(dev_priv))
if (HAS_PCH_DG2(dev_priv))dev_priv->hotplug_funcs = &icp_hpd_funcs;else if (HAS_PCH_DG1(dev_priv)) dev_priv->hotplug_funcs = &dg1_hpd_funcs;diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 4ea1713e6b60..4d12abb2d7ff 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -6182,6 +6182,7 @@ /* south display engine interrupt: ICP/TGP */ #define SDE_GMBUS_ICP (1 << 23) #define SDE_TC_HOTPLUG_ICP(hpd_pin) REG_BIT(24 + _HPD_PIN_TC(hpd_pin)) +#define SDE_TC_HOTPLUG_DG2(hpd_pin) REG_BIT(25 + _HPD_PIN_TC(hpd_pin)) /* sigh */ #define SDE_DDI_HOTPLUG_ICP(hpd_pin) REG_BIT(16 + _HPD_PIN_DDI(hpd_pin)) #define SDE_DDI_HOTPLUG_MASK_ICP (SDE_DDI_HOTPLUG_ICP(HPD_PORT_D) | \ SDE_DDI_HOTPLUG_ICP(HPD_PORT_C) | \ -- 2.20.1