We need bare address packets at the start and end of each i2c over aux transaction to properly reset the connection between transactions. This mirrors what the existing dp i2c over aux algo currently does.
This fixes EDID fetches on certain monitors especially with dp bridges.
Signed-off-by: Alex Deucher alexander.deucher@amd.com --- drivers/gpu/drm/drm_dp_helper.c | 56 ++++++++++++++++++++++++----------------- 1 file changed, 33 insertions(+), 23 deletions(-)
diff --git a/drivers/gpu/drm/drm_dp_helper.c b/drivers/gpu/drm/drm_dp_helper.c index 74724aa..ed22c6c 100644 --- a/drivers/gpu/drm/drm_dp_helper.c +++ b/drivers/gpu/drm/drm_dp_helper.c @@ -664,12 +664,27 @@ static int drm_dp_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num) { struct drm_dp_aux *aux = adapter->algo_data; - unsigned int i, j; + unsigned int m, b; + struct drm_dp_aux_msg msg; + int err = 0; + u8 buf = 0;
- for (i = 0; i < num; i++) { - struct drm_dp_aux_msg msg; - int err; + memset(&msg, 0, sizeof(msg));
+ for (m = 0; m < num; m++) { + msg.address = msgs[m].addr; + msg.request = (msgs[m].flags & I2C_M_RD) ? + DP_AUX_I2C_READ : + DP_AUX_I2C_WRITE; + msg.request |= DP_AUX_I2C_MOT; + msg.buffer = &buf; + msg.size = 1; + msg.flags = DRM_DP_AUX_MSG_FLAGS_BARE_ADDRESS; + err = drm_dp_i2c_do_msg(aux, &msg); + if (err < 0) { + printk("error %d in bare address write\n", err); + break; + } /* * Many hardware implementations support FIFOs larger than a * single byte, but it has been empirically determined that @@ -677,31 +692,26 @@ static int drm_dp_i2c_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, * decreased performance. Therefore each message is simply * transferred byte-by-byte. */ - for (j = 0; j < msgs[i].len; j++) { - memset(&msg, 0, sizeof(msg)); - msg.address = msgs[i].addr; - - msg.request = (msgs[i].flags & I2C_M_RD) ? - DP_AUX_I2C_READ : - DP_AUX_I2C_WRITE; - - /* - * All messages except the last one are middle-of- - * transfer messages. - */ - if ((i < num - 1) || (j < msgs[i].len - 1)) - msg.request |= DP_AUX_I2C_MOT; - - msg.buffer = msgs[i].buf + j; + for (b = 0; b < msgs[m].len; b++) { + msg.buffer = msgs[m].buf + b; msg.size = 1; + msg.flags = 0;
err = drm_dp_i2c_do_msg(aux, &msg); if (err < 0) - return err; + break; } } - - return num; + if (err >= 0) + err = num; + /* send a bare address packet to close out the connection */ + msg.request &= ~DP_AUX_I2C_MOT; + msg.buffer = &buf; + msg.size = 1; + msg.flags = DRM_DP_AUX_MSG_FLAGS_BARE_ADDRESS; + (void)drm_dp_i2c_do_msg(aux, &msg); + + return err; }
static const struct i2c_algorithm drm_dp_i2c_algo = {