This patch does following: - Adds a new structure (drm_hdmi_info) in drm_display_info. This structure will be used to save and indicate if sink supports advanced HDMI 2.0 features - Adds another structure drm_scdc within drm_hdmi_info, to reflect scdc support and capabilities in connected HDMI 2.0 sink. - Checks the HF-VSDB block for presence of SCDC, and marks it in scdc structure - If SCDC is present, checks if sink is capable of generating SCDC read request, and marks it in scdc structure.
V2: Addressed review comments Thierry: - Fix typos in commit message and make abbreviation consistent across the commit message. - Change structure object name from hdmi_info -> hdmi - Fix typos and abbreviations in description of structure drm_hdmi_info end the description with a full stop. - Create a structure drm_scdc, and keep all information related to SCDC register set (supported, read request supported) etc in it.
Ville: - Change rr -> read_request - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all of HF-VSDB parsing can be kept in same function, in incremental patches.
V3: Rebase. V4: Rebase. V5: Rebase. V6: Addressed review comments from Ville - Add clock rate calculations for 1/10 and 1/40 ratios - Remove leftovers from old patchset V7: Added R-B from Jose. V8: Rebase. V9: Rebase. V10: Rebase.
Signed-off-by: Shashank Sharma shashank.sharma@intel.com Reviewed-by: Thierry Reding treding@nvidia.com Reviewed-by: Jose Abreu joabreu@synopsys.com --- drivers/gpu/drm/drm_edid.c | 33 ++++++++++- drivers/gpu/drm/drm_scdc_helper.c | 121 ++++++++++++++++++++++++++++++++++++++ include/drm/drm_connector.h | 19 ++++++ include/drm/drm_edid.h | 1 - include/drm/drm_scdc_helper.h | 27 +++++++++ 5 files changed, 199 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index d64b7bd..fad3d44 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -37,6 +37,7 @@ #include <drm/drm_edid.h> #include <drm/drm_encoder.h> #include <drm/drm_displayid.h> +#include <drm/drm_scdc_helper.h>
#include "drm_crtc_internal.h"
@@ -3820,13 +3821,43 @@ enum hdmi_quantization_range static void drm_parse_hdmi_forum_vsdb(struct drm_connector *connector, const u8 *hf_vsdb) { - struct drm_hdmi_info *hdmi = &connector->display_info.hdmi; + struct drm_display_info *display = &connector->display_info; + struct drm_hdmi_info *hdmi = &display->hdmi;
if (hf_vsdb[6] & 0x80) { hdmi->scdc.supported = true; if (hf_vsdb[6] & 0x40) hdmi->scdc.read_request = true; } + + /* + * All HDMI 2.0 monitors must support scrambling at rates > 340 MHz. + * And as per the spec, three factors confirm this: + * * Availability of a HF-VSDB block in EDID (check) + * * Non zero Max_TMDS_Char_Rate filed in HF-VSDB (let's check) + * * SCDC support available (let's check) + * Lets check it out. + */ + + if (hf_vsdb[5]) { + /* max clock is 5000 KHz times block value */ + u32 max_tmds_clock = hf_vsdb[5] * 5000; + struct drm_scdc *scdc = &hdmi->scdc; + + if (max_tmds_clock > 340000) { + display->max_tmds_clock = max_tmds_clock; + DRM_DEBUG_KMS("HF-VSDB: max TMDS clock %d kHz\n", + display->max_tmds_clock); + } + + if (scdc->supported) { + scdc->scrambling.supported = true; + + /* Few sinks support scrambling for cloks < 340M */ + if ((hf_vsdb[6] & 0x8)) + scdc->scrambling.low_rates = true; + } + } }
static void drm_parse_hdmi_deep_color_info(struct drm_connector *connector, diff --git a/drivers/gpu/drm/drm_scdc_helper.c b/drivers/gpu/drm/drm_scdc_helper.c index c2dd33f..3cd96a9 100644 --- a/drivers/gpu/drm/drm_scdc_helper.c +++ b/drivers/gpu/drm/drm_scdc_helper.c @@ -22,8 +22,10 @@ */
#include <linux/slab.h> +#include <linux/delay.h>
#include <drm/drm_scdc_helper.h> +#include <drm/drmP.h>
/** * DOC: scdc helpers @@ -121,3 +123,122 @@ ssize_t drm_scdc_write(struct i2c_adapter *adapter, u8 offset, return 0; } EXPORT_SYMBOL(drm_scdc_write); + +/** + * drm_scdc_check_scrambling_status - what is status of scrambling? + * @adapter: I2C adapter for DDC channel + * + * Reads the scrambler status over SCDC, and checks the + * scrambling status. + * + * Returns: + * True if the scrambling is enabled, false otherwise. + */ + +bool drm_scdc_get_scrambling_status(struct i2c_adapter *adapter) +{ + u8 status; + int ret; + + ret = drm_scdc_readb(adapter, SCDC_SCRAMBLER_STATUS, &status); + if (ret < 0) { + DRM_ERROR("Failed to read scrambling status, error %d\n", ret); + return false; + } + + return status & SCDC_SCRAMBLING_STATUS; +} +EXPORT_SYMBOL(drm_scdc_get_scrambling_status); + +/** + * drm_scdc_set_scrambling - enable scrambling + * @adapter: I2C adapter for DDC channel + * @enable: bool to indicate if scrambling is to be enabled/disabled + * + * Writes the TMDS config register over SCDC channel, and: + * enables scrambling when enable = 1 + * disables scrambling when enable = 0 + * + * Returns: + * True if scrambling is set/reset successfully, false otherwise. + */ + +bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable) +{ + u8 config; + int ret; + + ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config); + if (ret < 0) { + DRM_ERROR("Failed to read tmds config, err=%d\n", ret); + return false; + } + + if (enable) + config |= SCDC_SCRAMBLING_ENABLE; + else + config &= ~SCDC_SCRAMBLING_ENABLE; + + ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config); + if (ret < 0) { + DRM_ERROR("Failed to enable scrambling, error %d\n", ret); + return false; + } + + return true; +} +EXPORT_SYMBOL(drm_scdc_set_scrambling); + +/** + * drm_scdc_set_high_tmds_clock_ratio - set TMDS clock ratio + * @adapter: I2C adapter for DDC channel + * @set: ret or reset the high clock ratio + * + * TMDS clock ratio calculations go like this: + * TMDS character = 10 bit TMDS encoded value + * TMDS character rate = The rate at which TMDS characters are transmitted(Mcsc) + * TMDS bit rate = 10x TMDS character rate + * As per the spec: + * TMDS clock rate for pixel clock < 340 MHz = 1x the character rate + * = 1/10 pixel clock rate + * TMDS clock rate for pixel clock > 340 MHz = 0.25x the character rate + * = 1/40 pixel clock rate + * + * Writes to the TMDS config register over SCDC channel, and: + * sets TMDS clock ratio to 1/40 when set = 1 + * sets TMDS clock ratio to 1/10 when set = 0 + * + * Returns: + * True if write is successful, false otherwise. + */ +bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set) +{ + u8 config; + int ret; + + ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config); + if (ret < 0) { + DRM_ERROR("Failed to read tmds config, err=%d\n", ret); + return false; + } + + if (set) + config |= SCDC_TMDS_BIT_CLOCK_RATIO_BY_40; + else + config &= ~SCDC_TMDS_BIT_CLOCK_RATIO_BY_40; + + ret = drm_scdc_writeb(adapter, SCDC_TMDS_CONFIG, config); + if (ret < 0) { + DRM_ERROR("Failed to set TMDS clock ratio, error %d\n", ret); + return false; + } + + /* + * The spec says that a source should wait minimum 1ms and maximum + * 100ms after writing the TMDS config for clock ratio. Lets allow a + * wait of upto 2ms here. + */ + usleep_range(1000, 2000); + return true; +} +EXPORT_SYMBOL(drm_scdc_set_high_tmds_clock_ratio); diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index bf9d6f5..f8b766d 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -90,6 +90,20 @@ enum subpixel_order {
};
+/** + * struct drm_scrambling: sink's scrambling support. + */ +struct drm_scrambling { + /** + * @supported: scrambling supported for rates > 340 Mhz. + */ + bool supported; + /** + * @low_rates: scrambling supported for rates <= 340 Mhz. + */ + bool low_rates; +}; + /* * struct drm_scdc - Information about scdc capabilities of a HDMI 2.0 sink * @@ -105,8 +119,13 @@ struct drm_scdc { * @read_request: sink is capable of generating scdc read request. */ bool read_request; + /** + * @scrambling: sink's scrambling capabilities + */ + struct drm_scrambling scrambling; };
+ /** * struct drm_hdmi_info - runtime information about the connected HDMI sink * diff --git a/include/drm/drm_edid.h b/include/drm/drm_edid.h index 3ead84d..7b9f48b 100644 --- a/include/drm/drm_edid.h +++ b/include/drm/drm_edid.h @@ -476,5 +476,4 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name, struct drm_display_mode *drm_mode_find_dmt(struct drm_device *dev, int hsize, int vsize, int fresh, bool rb); - #endif /* __DRM_EDID_H__ */ diff --git a/include/drm/drm_scdc_helper.h b/include/drm/drm_scdc_helper.h index 9c52deb..ab6bcfb 100644 --- a/include/drm/drm_scdc_helper.h +++ b/include/drm/drm_scdc_helper.h @@ -129,4 +129,31 @@ static inline int drm_scdc_writeb(struct i2c_adapter *adapter, u8 offset, return drm_scdc_write(adapter, offset, &value, sizeof(value)); }
+/** + * drm_scdc_set_scrambling - enable scrambling + * @adapter: I2C adapter for DDC channel + * @enable: bool to indicate if scrambling is to be enabled/disabled + * + * Writes the TMDS config register over SCDC channel, and: + * enables scrambling when enable = 1 + * disables scrambling when enable = 0 + * + * Returns: + * True if scrambling is set/reset successfully, false otherwise. + */ +bool drm_scdc_set_scrambling(struct i2c_adapter *adapter, bool enable); + +/** + * drm_scdc_set_high_tmds_clock_ratio - set TMDS clock ratio + * @adapter: I2C adapter for DDC channel + * @set: ret or reset the high clock ratio + * + * Writes to the TMDS config register over SCDC channel, and: + * sets TMDS clock ratio to 1/40 when set = 1 + * sets TMDS clock ratio to 1/10 when set = 0 + * + * Returns: + * True if write is successful, false otherwise. + */ +bool drm_scdc_set_high_tmds_clock_ratio(struct i2c_adapter *adapter, bool set); #endif