The TC358767/TC358867/TC9595 are all capable of operating in multiple modes, DPI-to-(e)DP, DSI-to-(e)DP, DSI-to-DPI. Only the first mode is currently supported. In order to support the rest of the modes without making the tc_probe() overly long, split the bridge endpoint parsing into dedicated function, where the necessary logic to detect the bridge mode based on which endpoints are connected, can be implemented.
Reviewed-by: Lucas Stach l.stach@pengutronix.de Signed-off-by: Marek Vasut marex@denx.de Cc: Jonas Karlman jonas@kwiboo.se Cc: Laurent Pinchart Laurent.pinchart@ideasonboard.com Cc: Maxime Ripard maxime@cerno.tech Cc: Neil Armstrong narmstrong@baylibre.com Cc: Sam Ravnborg sam@ravnborg.org --- V2: - Rename tc_probe_bridge_mode() to tc_probe_edp_bridge_endpoint() to better reflect that it parses the (e)DP output endpoint V3: - Add RB from Lucas --- drivers/gpu/drm/bridge/tc358767.c | 30 +++++++++++++++++++++--------- 1 file changed, 21 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index ea0d4467878f0..e9cec6f8e0e9d 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -1646,19 +1646,12 @@ static irqreturn_t tc_irq_handler(int irq, void *arg) return IRQ_HANDLED; }
-static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) +static int tc_probe_edp_bridge_endpoint(struct tc_data *tc) { - struct device *dev = &client->dev; + struct device *dev = tc->dev; struct drm_panel *panel; - struct tc_data *tc; int ret;
- tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL); - if (!tc) - return -ENOMEM; - - tc->dev = dev; - /* port@2 is the output port */ ret = drm_of_find_panel_or_bridge(dev->of_node, 2, 0, &panel, NULL); if (ret && ret != -ENODEV) @@ -1677,6 +1670,25 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) tc->bridge.type = DRM_MODE_CONNECTOR_DisplayPort; }
+ return ret; +} + +static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct tc_data *tc; + int ret; + + tc = devm_kzalloc(dev, sizeof(*tc), GFP_KERNEL); + if (!tc) + return -ENOMEM; + + tc->dev = dev; + + ret = tc_probe_edp_bridge_endpoint(tc); + if (ret) + return ret; + /* Shut down GPIO is optional */ tc->sd_gpio = devm_gpiod_get_optional(dev, "shutdown", GPIOD_OUT_HIGH); if (IS_ERR(tc->sd_gpio))