Add merge new advance config API. The original merge API is mtk_ddp_comp_funcs function prototype. The API interface parameters cannot be modified, so add a new config API for extension. This is the preparation for ovl_adaptor merge control.
Signed-off-by: Nancy.Lin nancy.lin@mediatek.com Reviewed-by: Chun-Kuang Hu chunkuang.hu@kernel.org Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Tested-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Tested-by: Bo-Chen Chen rex-bc.chen@mediatek.com --- drivers/gpu/drm/mediatek/mtk_disp_drv.h | 3 ++ drivers/gpu/drm/mediatek/mtk_disp_merge.c | 52 ++++++++++++++++++++--- 2 files changed, 48 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_drv.h b/drivers/gpu/drm/mediatek/mtk_disp_drv.h index 2cd1c660ace3..e847e90f436d 100644 --- a/drivers/gpu/drm/mediatek/mtk_disp_drv.h +++ b/drivers/gpu/drm/mediatek/mtk_disp_drv.h @@ -63,6 +63,9 @@ void mtk_merge_config(struct device *dev, unsigned int width, unsigned int bpc, struct cmdq_pkt *cmdq_pkt); void mtk_merge_start(struct device *dev); void mtk_merge_stop(struct device *dev); +void mtk_merge_advance_config(struct device *dev, unsigned int l_w, unsigned int r_w, + unsigned int h, unsigned int vrefresh, unsigned int bpc, + struct cmdq_pkt *cmdq_pkt);
void mtk_ovl_bgclr_in_on(struct device *dev); void mtk_ovl_bgclr_in_off(struct device *dev); diff --git a/drivers/gpu/drm/mediatek/mtk_disp_merge.c b/drivers/gpu/drm/mediatek/mtk_disp_merge.c index 45face638153..40da0555416d 100644 --- a/drivers/gpu/drm/mediatek/mtk_disp_merge.c +++ b/drivers/gpu/drm/mediatek/mtk_disp_merge.c @@ -17,6 +17,7 @@ #define DISP_REG_MERGE_CTRL 0x000 #define MERGE_EN 1 #define DISP_REG_MERGE_CFG_0 0x010 +#define DISP_REG_MERGE_CFG_1 0x014 #define DISP_REG_MERGE_CFG_4 0x020 #define DISP_REG_MERGE_CFG_10 0x038 /* no swap */ @@ -25,9 +26,12 @@ #define DISP_REG_MERGE_CFG_12 0x040 #define CFG_10_10_1PI_2PO_BUF_MODE 6 #define CFG_10_10_2PI_2PO_BUF_MODE 8 +#define CFG_11_10_1PI_2PO_MERGE 18 #define FLD_CFG_MERGE_MODE GENMASK(4, 0) #define DISP_REG_MERGE_CFG_24 0x070 #define DISP_REG_MERGE_CFG_25 0x074 +#define DISP_REG_MERGE_CFG_26 0x078 +#define DISP_REG_MERGE_CFG_27 0x07c #define DISP_REG_MERGE_CFG_36 0x0a0 #define ULTRA_EN BIT(0) #define PREULTRA_EN BIT(4) @@ -98,12 +102,19 @@ static void mtk_merge_fifo_setting(struct mtk_disp_merge *priv, void mtk_merge_config(struct device *dev, unsigned int w, unsigned int h, unsigned int vrefresh, unsigned int bpc, struct cmdq_pkt *cmdq_pkt) +{ + mtk_merge_advance_config(dev, w, 0, h, vrefresh, bpc, cmdq_pkt); +} + +void mtk_merge_advance_config(struct device *dev, unsigned int l_w, unsigned int r_w, + unsigned int h, unsigned int vrefresh, unsigned int bpc, + struct cmdq_pkt *cmdq_pkt) { struct mtk_disp_merge *priv = dev_get_drvdata(dev); unsigned int mode = CFG_10_10_1PI_2PO_BUF_MODE;
- if (!h || !w) { - dev_err(dev, "%s: input width(%d) or height(%d) is invalid\n", __func__, w, h); + if (!h || !l_w) { + dev_err(dev, "%s: input width(%d) or height(%d) is invalid\n", __func__, l_w, h); return; }
@@ -112,14 +123,41 @@ void mtk_merge_config(struct device *dev, unsigned int w, mode = CFG_10_10_2PI_2PO_BUF_MODE; }
- mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs, + if (r_w) + mode = CFG_11_10_1PI_2PO_MERGE; + + mtk_ddp_write(cmdq_pkt, h << 16 | l_w, &priv->cmdq_reg, priv->regs, DISP_REG_MERGE_CFG_0); - mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs, + mtk_ddp_write(cmdq_pkt, h << 16 | r_w, &priv->cmdq_reg, priv->regs, + DISP_REG_MERGE_CFG_1); + mtk_ddp_write(cmdq_pkt, h << 16 | (l_w + r_w), &priv->cmdq_reg, priv->regs, DISP_REG_MERGE_CFG_4); - mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs, + /* + * DISP_REG_MERGE_CFG_24 is merge SRAM0 w/h + * DISP_REG_MERGE_CFG_25 is merge SRAM1 w/h. + * If r_w > 0, the merge is in merge mode (input0 and input1 merge together), + * the input0 goes to SRAM0, and input1 goes to SRAM1. + * If r_w = 0, the merge is in buffer mode, the input goes through SRAM0 and + * then to SRAM1. Both SRAM0 and SRAM1 are set to the same size. + */ + mtk_ddp_write(cmdq_pkt, h << 16 | l_w, &priv->cmdq_reg, priv->regs, DISP_REG_MERGE_CFG_24); - mtk_ddp_write(cmdq_pkt, h << 16 | w, &priv->cmdq_reg, priv->regs, - DISP_REG_MERGE_CFG_25); + if (r_w) + mtk_ddp_write(cmdq_pkt, h << 16 | r_w, &priv->cmdq_reg, priv->regs, + DISP_REG_MERGE_CFG_25); + else + mtk_ddp_write(cmdq_pkt, h << 16 | l_w, &priv->cmdq_reg, priv->regs, + DISP_REG_MERGE_CFG_25); + + /* + * DISP_REG_MERGE_CFG_26 and DISP_REG_MERGE_CFG_27 is only used in LR merge. + * Only take effect when the merge is setting to merge mode. + */ + mtk_ddp_write(cmdq_pkt, h << 16 | l_w, &priv->cmdq_reg, priv->regs, + DISP_REG_MERGE_CFG_26); + mtk_ddp_write(cmdq_pkt, h << 16 | r_w, &priv->cmdq_reg, priv->regs, + DISP_REG_MERGE_CFG_27); + mtk_ddp_write_mask(cmdq_pkt, SWAP_MODE, &priv->cmdq_reg, priv->regs, DISP_REG_MERGE_CFG_10, FLD_SWAP_MODE); mtk_ddp_write_mask(cmdq_pkt, mode, &priv->cmdq_reg, priv->regs,