R16 board has DLCP3433 DSI bridge for connecting TI DMD Projectors.
Enable support for it.
Note: This is for testing purpose, DLPC3433 not available in BPI-M2M.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- .../boot/dts/sun8i-r16-bananapi-m2m-i2c.dts | 69 +++++++++++++++++++ 1 file changed, 69 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m-i2c.dts b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m-i2c.dts index 7713cdaf6211..a96fbfd743f7 100644 --- a/arch/arm/boot/dts/sun8i-r16-bananapi-m2m-i2c.dts +++ b/arch/arm/boot/dts/sun8i-r16-bananapi-m2m-i2c.dts @@ -86,6 +86,16 @@ vol-down { }; };
+ panel { + compatible = "panel-simple"; + + port { + panel_out_bridge: endpoint { + remote-endpoint = <&bridge_out_panel>; + }; + }; + }; + reg_vcc5v0: vcc5v0 { compatible = "regulator-fixed"; regulator-name = "vcc5v0"; @@ -125,6 +135,32 @@ &dai { status = "okay"; };
+&de { + status = "okay"; +}; + +&dphy { + status = "okay"; +}; + +&dsi { + vcc-dsi-supply = <®_dcdc1>; /* VCC-DSI */ + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + dsi_out_bridge: endpoint { + remote-endpoint = <&bridge_out_dsi>; + }; + }; + }; +}; + &ehci0 { status = "okay"; }; @@ -132,6 +168,35 @@ &ehci0 { &i2c1 { clock-frequency = <100000>; status = "okay"; + + bridge@1d { + compatible = "ti,dlpc3433"; + reg = <0x1d>; + enable-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; + vcc_intf-supply = <®_dldo1>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + bridge_in: port@0 { + reg = <0>; + + bridge_out_dsi: endpoint { + remote-endpoint = <&dsi_out_bridge>; + data-lanes = <0 1 2 3>; + }; + }; + + bridge_out: port@1 { + reg = <1>; + + bridge_out_panel: endpoint { + remote-endpoint = <&panel_out_bridge>; + }; + }; + }; + }; };
&i2c2 { @@ -289,6 +354,10 @@ &sound { "Right DAC", "AIF1 Slot 0 Right"; };
+&tcon0 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>;