ADV7533 is a DSI to HDMI encoder chip. It's like ADV7511, but with an additional DSI RX block that takes in DSI video mode output.
This series adds support for ADV7533. Unlike ADV7511 that's modelled as a drm i2c slave encoder, ADV7533 is a drm_bridge object. The bridge ops further create a HDMI type connector device for the chip's output.
In order to pass DSI specific parameters to the host, the driver creates a dummy DSI device, which it registers to a DSI host as specified via DT.
The first patch in the series is a minor fix, the rest add ADV7533 support. They depend on the series I posted sometime back:
"drm/dsi: DSI for devices with different control bus" https://lkml.org/lkml/2015/6/30/42
Archit Taneja (4): drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled drm/i2c: adv7511: Refactor encoder slave functions drm/i2c: adv7511: Add drm_bridge/connector for ADV7533 drm/i2c: adv7511: Create mipi_dsi_device for ADV7533
Lars-Peter Clausen (1): drm/i2c: adv7511: Initial support for adv7533
drivers/gpu/drm/i2c/adv7511.c | 486 +++++++++++++++++++++++++++++++++++++----- 1 file changed, 437 insertions(+), 49 deletions(-)