Add the new flags argument to calls of (devm_)gpiod_get*() and remove any direction setting code afterwards.
Currently both forms (with or without the flags argument) are valid thanks to transitional macros in <linux/gpio/consumer.h>. These macros will be removed once all consumers are updated and the flags argument will become compulsary.
Signed-off-by: Alexandre Courbot acourbot@nvidia.com --- drivers/gpu/drm/panel/panel-ld9040.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-ld9040.c b/drivers/gpu/drm/panel/panel-ld9040.c index 42ac67b21e9f..dd1d3f2e624e 100644 --- a/drivers/gpu/drm/panel/panel-ld9040.c +++ b/drivers/gpu/drm/panel/panel-ld9040.c @@ -336,17 +336,12 @@ static int ld9040_probe(struct spi_device *spi) if (ret < 0) return ret;
- ctx->reset_gpio = devm_gpiod_get(dev, "reset"); + ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); if (IS_ERR(ctx->reset_gpio)) { dev_err(dev, "cannot get reset-gpios %ld\n", PTR_ERR(ctx->reset_gpio)); return PTR_ERR(ctx->reset_gpio); } - ret = gpiod_direction_output(ctx->reset_gpio, 1); - if (ret < 0) { - dev_err(dev, "cannot configure reset-gpios %d\n", ret); - return ret; - }
spi->bits_per_word = 9; ret = spi_setup(spi);