Add dcumentation for auo,b101uan08.3, which is mipi dsi video panel and resolution is 1200x1920.
Signed-off-by: Jitao Shi jitao.shi@mediatek.com --- .../display/panel/auo,b101uan08.3.txt | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt
diff --git a/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt new file mode 100644 index 000000000000..7a31cfe534ac --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/auo,b101uan08.3.txt @@ -0,0 +1,34 @@ +AUO Corporation 10.1" WUXGA TFT LCD panel + +Required properties: +- compatible: should be "auo,b101uan08.3" +- reg: the virtual channel number of a DSI peripheral +- enable-gpios: a GPIO spec for the enable pin +- pp1800-supply: core voltage supply +- avdd-supply: phandle of the regulator that provides positive voltage +- avee-supply: phandle of the regulator that provides negative voltage +- backlight: phandle of the backlight device attached to the panel + +The device node can contain one 'port' child node with one child +'endpoint' node, according to the bindings defined in +media/video-interfaces.txt. This node should describe panel's video bus. + +Example: +&dsi { + ... + panel@0 { + compatible = "auo,b101uan08.3"; + reg = <0>; + enable-gpios = <&pio 45 0>; + avdd-supply = <&ppvarn_lcd>; + avee-supply = <&ppvarp_lcd>; + pp1800-supply = <&pp1800_lcd>; + backlight = <&backlight_lcd0>; + status = "okay"; + port { + panel_in: endpoint { + remote-endpoint = <&dsi_out>; + }; + }; + }; +};