This patch adds configuration of SiI9234 bridge to Trats2 board.
Signed-off-by: Tomasz Stanislawski t.stanislaws@samsung.com --- arch/arm/boot/dts/exynos4412-trats2.dts | 43 +++++++++++++++++++++++++++++++ 1 file changed, 43 insertions(+)
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 9583563d..65fd1d4 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -680,4 +680,47 @@ pulldown-ohm = <100000>; /* 100K */ io-channels = <&adc 2>; /* Battery temperature */ }; + + vsil: voltage-regulator-vsil { + compatible = "regulator-fixed"; + regulator-name = "HDMI_5V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpl0 4 0>; + enable-active-high; + vin-supply = <&buck7_reg>; + }; + + i2c-mhl { + compatible = "i2c-gpio"; + gpios = <&gpf0 4 0 &gpf0 6 0>; + i2c-gpio,delay-us = <100>; + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-0 = <&i2c_mhl_bus>; + pinctrl-names = "default"; + status = "okay"; + + sii9234: sii9234@39 { + compatible = "sil,sii9234"; + vcc-supply = <&vsil>; + gpio-reset = <&gpf3 4 0>; + gpio-int = <&gpf3 5 0>; + reg = <0x39>; + }; + }; +}; + +&pinctrl_0 { + mhl_int: mhl-int { + samsung,pins = "gpf3-5"; + samsung,pin-pud = <0>; + }; + i2c_mhl_bus: i2c-mhl-bus { + samsung,pins = "gpf0-4", "gpf0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; };