On Tue, Jun 23, 2015 at 01:41:46PM -0300, Fabio Estevam wrote:
Hi,
On a imx6q-cubox-i running 4.1 kernel I am getting 1920x1080 HDMI resolution if I boot the board with the HDMI cable connected.
If I boot it without the HDMI cable and then connect it afterwards, the resolution goes to only 1024 x 768 and the following IPU message is seen:
If you have no connected connectors, then you get 1024x768:
imx-drm display-subsystem: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768
as that's what DRM defaults to when it has no other timing information available.
[ 16.310548] imx-ipuv3 2400000.ipu: videomode adapted for IPU restrictions
I don't see this message booting on a Hummingboard with HDMI disconnected.