Add documentation for DT properties supported by ps8622/ps8625 eDP-LVDS converter.
Signed-off-by: Ajay Kumar ajaykumar.rs@samsung.com Acked-by: Inki Dae inki.dae@samsung.com Tested-by: Rahul Sharma rahul.sharma@samsung.com Tested-by: Javier Martinez Canillas javier.martinez@collabora.co.uk Tested-by: Gustavo Padovan gustavo.padovan@collabora.co.uk Tested-by: Sjoerd Simons sjoerd.simons@collabora.co.uk --- .../devicetree/bindings/video/bridge/ps8622.txt | 31 ++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/bridge/ps8622.txt
diff --git a/Documentation/devicetree/bindings/video/bridge/ps8622.txt b/Documentation/devicetree/bindings/video/bridge/ps8622.txt new file mode 100644 index 0000000..c989c38 --- /dev/null +++ b/Documentation/devicetree/bindings/video/bridge/ps8622.txt @@ -0,0 +1,31 @@ +ps8622-bridge bindings + +Required properties: + - compatible: "parade,ps8622" or "parade,ps8625" + - reg: first i2c address of the bridge + - sleep-gpios: OF device-tree gpio specification for PD_ pin. + - reset-gpios: OF device-tree gpio specification for RST_ pin. + +Optional properties: + - lane-count: number of DP lanes to use + - use-external-pwm: backlight will be controlled by an external PWM + - video interfaces: Device node can contain video interface port + nodes for panel according to [1]. + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + lvds-bridge@48 { + compatible = "parade,ps8622"; + reg = <0x48>; + sleep-gpios = <&gpc3 6 1 0 0>; + reset-gpios = <&gpc3 1 1 0 0>; + lane-count = <1>; + ports { + port@0 { + bridge_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; + }; + };