Andreas
On 9/12/19 9:58 AM, Andreas Kemnade wrote:
On Thu, 12 Sep 2019 06:39:50 -0500 Dan Murphy dmurphy@ti.com wrote:
Andreas
On 9/11/19 12:21 PM, Andreas Kemnade wrote:
add enable-gpios to describe HWEN pin
Signed-off-by: Andreas Kemnade andreas@kemnade.info Acked-by: Daniel Thompson daniel.thompson@linaro.org
changes in v2: added example changes in v3: added Acked-by .../bindings/leds/backlight/lm3630a-backlight.yaml | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml index dc129d9a329e..1fa83feffe16 100644 --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml @@ -29,6 +29,10 @@ properties: '#size-cells': const: 0
- enable-gpios:
- description: GPIO to use to enable/disable the backlight (HWEN pin).
- maxItems: 1
- required:
- compatible
- reg
@@ -92,6 +96,7 @@ examples: i2c { #address-cells = <1>; #size-cells = <0>;
enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>; led-controller@38 { compatible = "ti,lm3630a";Looks good to me
well, the enable-gpios is still at the same place as in v2. This was sent before your comments to v2 have been arrived.
Ah I overlooked that. Yeah that still needs to move I assumed you moved it.
Dan
Regards, Andreas