Add basic support for the sii902x RGB -> HDMI bridge. This driver does not support audio output yet.
Signed-off-by: Boris Brezillon boris.brezillon@free-electrons.com Tested-by: Nicolas Ferre nicolas.ferre@atmel.com --- Changes in v8: - remove useless headers inclusion - fix macro names (s/SIL/SII) - drop unneeded hotplug_work field from struct sii902x - drop drm_connector_unregister() call in the ->destroy() method - add a timeout when polling a register value
Changes in v6: - use HDMI_INFOFRAME_SIZE(AVI) - fix reset_gpio initialization - reduce the reset time based on Ming feedback
Changes in v5: - drop the best_encoder() implementation
Changes in v4: - make reset GPIO optional - only support attaching to DRM devices supporting atomic updates
Changes in v3: - fix get_modes() implementation to avoid turning the screen in power save mode - rename the driver (sil902x -> sii902x)
Changes in v2: - fix errors reported by the kbuild robot
fixup! drm: bridge: Add sii902x driver --- drivers/gpu/drm/bridge/Kconfig | 8 + drivers/gpu/drm/bridge/Makefile | 1 + drivers/gpu/drm/bridge/sii902x.c | 467 +++++++++++++++++++++++++++++++++++++++ 3 files changed, 476 insertions(+) create mode 100644 drivers/gpu/drm/bridge/sii902x.c
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 8f7423f..a1419214 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -50,6 +50,14 @@ config DRM_PARADE_PS8622 ---help--- Parade eDP-LVDS bridge chip driver.
+config DRM_SII902X + tristate "Silicon Image sii902x RGB/HDMI bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + ---help--- + Silicon Image sii902x bridge chip driver. + source "drivers/gpu/drm/bridge/analogix/Kconfig"
endmenu diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile index 96b13b3..bfec9f8 100644 --- a/drivers/gpu/drm/bridge/Makefile +++ b/drivers/gpu/drm/bridge/Makefile @@ -5,4 +5,5 @@ obj-$(CONFIG_DRM_DW_HDMI) += dw-hdmi.o obj-$(CONFIG_DRM_DW_HDMI_AHB_AUDIO) += dw-hdmi-ahb-audio.o obj-$(CONFIG_DRM_NXP_PTN3460) += nxp-ptn3460.o obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o +obj-$(CONFIG_DRM_SII902X) += sii902x.o obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/ diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c new file mode 100644 index 0000000..9126d03 --- /dev/null +++ b/drivers/gpu/drm/bridge/sii902x.c @@ -0,0 +1,467 @@ +/* + * Copyright (C) 2016 Atmel + * Bo Shen voice.shen@atmel.com + * + * Authors: Bo Shen voice.shen@atmel.com + * Boris Brezillon boris.brezillon@free-electrons.com + * Wu, Songjun Songjun.Wu@atmel.com + * + * + * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/regmap.h> + +#include <drm/drmP.h> +#include <drm/drm_atomic_helper.h> +#include <drm/drm_crtc_helper.h> +#include <drm/drm_edid.h> + +#define SII902X_TPI_VIDEO_DATA 0x0 + +#define SII902X_TPI_PIXEL_REPETITION 0x8 +#define SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT BIT(5) +#define SII902X_TPI_AVI_PIXEL_REP_RISING_EDGE BIT(4) +#define SII902X_TPI_AVI_PIXEL_REP_4X 3 +#define SII902X_TPI_AVI_PIXEL_REP_2X 1 +#define SII902X_TPI_AVI_PIXEL_REP_NONE 0 +#define SII902X_TPI_CLK_RATIO_HALF (0 << 6) +#define SII902X_TPI_CLK_RATIO_1X (1 << 6) +#define SII902X_TPI_CLK_RATIO_2X (2 << 6) +#define SII902X_TPI_CLK_RATIO_4X (3 << 6) + +#define SII902X_TPI_AVI_IN_FORMAT 0x9 +#define SII902X_TPI_AVI_INPUT_BITMODE_12BIT BIT(7) +#define SII902X_TPI_AVI_INPUT_DITHER BIT(6) +#define SII902X_TPI_AVI_INPUT_RANGE_LIMITED (2 << 2) +#define SII902X_TPI_AVI_INPUT_RANGE_FULL (1 << 2) +#define SII902X_TPI_AVI_INPUT_RANGE_AUTO (0 << 2) +#define SII902X_TPI_AVI_INPUT_COLORSPACE_BLACK (3 << 0) +#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV422 (2 << 0) +#define SII902X_TPI_AVI_INPUT_COLORSPACE_YUV444 (1 << 0) +#define SII902X_TPI_AVI_INPUT_COLORSPACE_RGB (0 << 0) + +#define SII902X_TPI_AVI_INFOFRAME 0x0c + +#define SII902X_SYS_CTRL_DATA 0x1a +#define SII902X_SYS_CTRL_PWR_DWN BIT(4) +#define SII902X_SYS_CTRL_AV_MUTE BIT(3) +#define SII902X_SYS_CTRL_DDC_BUS_REQ BIT(2) +#define SII902X_SYS_CTRL_DDC_BUS_GRTD BIT(1) +#define SII902X_SYS_CTRL_OUTPUT_MODE BIT(0) +#define SII902X_SYS_CTRL_OUTPUT_HDMI 1 +#define SII902X_SYS_CTRL_OUTPUT_DVI 0 + +#define SII902X_REG_CHIPID(n) (0x1b + (n)) + +#define SII902X_PWR_STATE_CTRL 0x1e +#define SII902X_AVI_POWER_STATE_MSK GENMASK(1, 0) +#define SII902X_AVI_POWER_STATE_D(l) ((l) & SII902X_AVI_POWER_STATE_MSK) + +#define SII902X_INT_ENABLE 0x3c +#define SII902X_INT_STATUS 0x3d +#define SII902X_HOTPLUG_EVENT BIT(0) +#define SII902X_PLUGGED_STATUS BIT(2) + +#define SII902X_REG_TPI_RQB 0xc7 + +#define SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS 500 + +struct sii902x { + struct i2c_client *i2c; + struct regmap *regmap; + struct drm_bridge bridge; + struct drm_connector connector; + struct gpio_desc *reset_gpio; +}; + +static inline struct sii902x *bridge_to_sii902x(struct drm_bridge *bridge) +{ + return container_of(bridge, struct sii902x, bridge); +} + +static inline struct sii902x *connector_to_sii902x(struct drm_connector *con) +{ + return container_of(con, struct sii902x, connector); +} + +static void sii902x_reset(struct sii902x *sii902x) +{ + if (!sii902x->reset_gpio) + return; + + gpiod_set_value(sii902x->reset_gpio, 1); + + /* The datasheet says treset-min = 100us. Make it 150us to be sure. */ + usleep_range(150, 200); + + gpiod_set_value(sii902x->reset_gpio, 0); +} + +static enum drm_connector_status +sii902x_connector_detect(struct drm_connector *connector, bool force) +{ + struct sii902x *sii902x = connector_to_sii902x(connector); + unsigned int status; + + regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status); + + return (status & SII902X_PLUGGED_STATUS) ? + connector_status_connected : connector_status_disconnected; +} + +static const struct drm_connector_funcs sii902x_connector_funcs = { + .dpms = drm_atomic_helper_connector_dpms, + .detect = sii902x_connector_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int sii902x_get_modes(struct drm_connector *connector) +{ + struct sii902x *sii902x = connector_to_sii902x(connector); + struct regmap *regmap = sii902x->regmap; + u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24; + unsigned long timeout; + unsigned int status; + struct edid *edid; + int num = 0; + int ret; + + ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA, + SII902X_SYS_CTRL_DDC_BUS_REQ, + SII902X_SYS_CTRL_DDC_BUS_REQ); + if (ret) + return ret; + + timeout = jiffies + + msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS); + do { + ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status); + if (ret) + return ret; + } while (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD) && + time_before(jiffies, timeout)); + + if (!(status & SII902X_SYS_CTRL_DDC_BUS_GRTD)) { + dev_err(&sii902x->i2c->dev, "failed to acquire the i2c bus"); + return -ETIMEDOUT; + } + + ret = regmap_write(regmap, SII902X_SYS_CTRL_DATA, status); + if (ret) + return ret; + + edid = drm_get_edid(connector, sii902x->i2c->adapter); + drm_mode_connector_update_edid_property(connector, edid); + if (edid) { + num = drm_add_edid_modes(connector, edid); + kfree(edid); + } + + ret = drm_display_info_set_bus_formats(&connector->display_info, + &bus_format, 1); + if (ret) + return ret; + + ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status); + if (ret) + return ret; + + ret = regmap_update_bits(regmap, SII902X_SYS_CTRL_DATA, + SII902X_SYS_CTRL_DDC_BUS_REQ | + SII902X_SYS_CTRL_DDC_BUS_GRTD, 0); + if (ret) + return ret; + + timeout = jiffies + + msecs_to_jiffies(SII902X_I2C_BUS_ACQUISITION_TIMEOUT_MS); + do { + ret = regmap_read(regmap, SII902X_SYS_CTRL_DATA, &status); + if (ret) + return ret; + } while (status & (SII902X_SYS_CTRL_DDC_BUS_REQ | + SII902X_SYS_CTRL_DDC_BUS_GRTD) && + time_before(jiffies, timeout)); + + if (status & (SII902X_SYS_CTRL_DDC_BUS_REQ | + SII902X_SYS_CTRL_DDC_BUS_GRTD)) { + dev_err(&sii902x->i2c->dev, "failed to release the i2c bus"); + return -ETIMEDOUT; + } + + return num; +} + +static enum drm_mode_status sii902x_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + /* TODO: check mode */ + + return MODE_OK; +} + +static const struct drm_connector_helper_funcs sii902x_connector_helper_funcs = { + .get_modes = sii902x_get_modes, + .mode_valid = sii902x_mode_valid, +}; + +static void sii902x_bridge_disable(struct drm_bridge *bridge) +{ + struct sii902x *sii902x = bridge_to_sii902x(bridge); + + regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA, + SII902X_SYS_CTRL_PWR_DWN, + SII902X_SYS_CTRL_PWR_DWN); +} + +static void sii902x_bridge_enable(struct drm_bridge *bridge) +{ + struct sii902x *sii902x = bridge_to_sii902x(bridge); + + regmap_update_bits(sii902x->regmap, SII902X_PWR_STATE_CTRL, + SII902X_AVI_POWER_STATE_MSK, + SII902X_AVI_POWER_STATE_D(0)); + regmap_update_bits(sii902x->regmap, SII902X_SYS_CTRL_DATA, + SII902X_SYS_CTRL_PWR_DWN, 0); +} + +static void sii902x_bridge_mode_set(struct drm_bridge *bridge, + struct drm_display_mode *mode, + struct drm_display_mode *adj) +{ + struct sii902x *sii902x = bridge_to_sii902x(bridge); + struct regmap *regmap = sii902x->regmap; + u8 buf[HDMI_INFOFRAME_SIZE(AVI)]; + struct hdmi_avi_infoframe frame; + int ret; + + buf[0] = adj->clock; + buf[1] = adj->clock >> 8; + buf[2] = adj->vrefresh; + buf[3] = 0x00; + buf[4] = adj->hdisplay; + buf[5] = adj->hdisplay >> 8; + buf[6] = adj->vdisplay; + buf[7] = adj->vdisplay >> 8; + buf[8] = SII902X_TPI_CLK_RATIO_1X | SII902X_TPI_AVI_PIXEL_REP_NONE | + SII902X_TPI_AVI_PIXEL_REP_BUS_24BIT; + buf[9] = SII902X_TPI_AVI_INPUT_RANGE_AUTO | + SII902X_TPI_AVI_INPUT_COLORSPACE_RGB; + + ret = regmap_bulk_write(regmap, SII902X_TPI_VIDEO_DATA, buf, 10); + if (ret) + return; + + ret = drm_hdmi_avi_infoframe_from_display_mode(&frame, adj); + if (ret < 0) { + DRM_ERROR("couldn't fill AVI infoframe\n"); + return; + } + + ret = hdmi_avi_infoframe_pack(&frame, buf, sizeof(buf)); + if (ret < 0) { + DRM_ERROR("failed to pack AVI infoframe: %d\n", ret); + return; + } + + /* Do not send the infoframe header, but keep the CRC field. */ + regmap_bulk_write(regmap, SII902X_TPI_AVI_INFOFRAME, + buf + HDMI_INFOFRAME_HEADER_SIZE - 1, + HDMI_AVI_INFOFRAME_SIZE + 1); +} + +static int sii902x_bridge_attach(struct drm_bridge *bridge) +{ + struct sii902x *sii902x = bridge_to_sii902x(bridge); + struct drm_device *drm = bridge->dev; + int ret; + + drm_connector_helper_add(&sii902x->connector, + &sii902x_connector_helper_funcs); + + if (!drm_core_check_feature(drm, DRIVER_ATOMIC)) { + dev_err(&sii902x->i2c->dev, + "sii902x driver is only compatible with DRM devices supporting atomic updates"); + return -ENOTSUPP; + } + + ret = drm_connector_init(drm, &sii902x->connector, + &sii902x_connector_funcs, + DRM_MODE_CONNECTOR_HDMIA); + if (ret) + return ret; + + if (sii902x->i2c->irq > 0) + sii902x->connector.polled = DRM_CONNECTOR_POLL_HPD; + else + sii902x->connector.polled = DRM_CONNECTOR_POLL_CONNECT; + + drm_mode_connector_attach_encoder(&sii902x->connector, bridge->encoder); + + return 0; +} + +static const struct drm_bridge_funcs sii902x_bridge_funcs = { + .attach = sii902x_bridge_attach, + .mode_set = sii902x_bridge_mode_set, + .disable = sii902x_bridge_disable, + .enable = sii902x_bridge_enable, +}; + +static const struct regmap_range sii902x_volatile_ranges[] = { + { .range_min = 0, .range_max = 0xff }, +}; + +static const struct regmap_access_table sii902x_volatile_table = { + .yes_ranges = sii902x_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(sii902x_volatile_ranges), +}; + +static const struct regmap_config sii902x_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_table = &sii902x_volatile_table, + .cache_type = REGCACHE_NONE, +}; + +static irqreturn_t sii902x_interrupt(int irq, void *data) +{ + struct sii902x *sii902x = data; + unsigned int status = 0; + + regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status); + regmap_write(sii902x->regmap, SII902X_INT_STATUS, status); + + if ((status & SII902X_HOTPLUG_EVENT) && sii902x->bridge.dev) + drm_helper_hpd_irq_event(sii902x->bridge.dev); + + return IRQ_HANDLED; +} + +static int sii902x_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + unsigned int status = 0; + struct sii902x *sii902x; + u8 chipid[4]; + int ret; + + sii902x = devm_kzalloc(dev, sizeof(*sii902x), GFP_KERNEL); + if (!sii902x) + return -ENOMEM; + + sii902x->i2c = client; + sii902x->regmap = devm_regmap_init_i2c(client, &sii902x_regmap_config); + if (IS_ERR(sii902x->regmap)) + return PTR_ERR(sii902x->regmap); + + sii902x->reset_gpio = devm_gpiod_get_optional(dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(sii902x->reset_gpio)) { + dev_err(dev, "Failed to retrieve/request reset gpio: %ld\n", + PTR_ERR(sii902x->reset_gpio)); + return PTR_ERR(sii902x->reset_gpio); + } + + sii902x_reset(sii902x); + + ret = regmap_write(sii902x->regmap, SII902X_REG_TPI_RQB, 0x0); + if (ret) + return ret; + + ret = regmap_bulk_read(sii902x->regmap, SII902X_REG_CHIPID(0), + &chipid, 4); + if (ret) { + dev_err(dev, "regmap_read failed %d\n", ret); + return ret; + } + + if (chipid[0] != 0xb0) { + dev_err(dev, "Invalid chipid: %02x (expecting 0xb0)\n", + chipid[0]); + return -EINVAL; + } + + /* Clear all pending interrupts */ + regmap_read(sii902x->regmap, SII902X_INT_STATUS, &status); + regmap_write(sii902x->regmap, SII902X_INT_STATUS, status); + + if (client->irq > 0) { + regmap_write(sii902x->regmap, SII902X_INT_ENABLE, + SII902X_HOTPLUG_EVENT); + + ret = devm_request_threaded_irq(dev, client->irq, NULL, + sii902x_interrupt, + IRQF_ONESHOT, dev_name(dev), + sii902x); + if (ret) + return ret; + } + + sii902x->bridge.funcs = &sii902x_bridge_funcs; + sii902x->bridge.of_node = dev->of_node; + ret = drm_bridge_add(&sii902x->bridge); + if (ret) { + dev_err(dev, "Failed to add drm_bridge\n"); + return ret; + } + + i2c_set_clientdata(client, sii902x); + + return 0; +} + +static int sii902x_remove(struct i2c_client *client) + +{ + struct sii902x *sii902x = i2c_get_clientdata(client); + + drm_bridge_remove(&sii902x->bridge); + + return 0; +} + +static const struct of_device_id sii902x_dt_ids[] = { + { .compatible = "sil,sii9022", }, + { } +}; +MODULE_DEVICE_TABLE(of, sii902x_dt_ids); + +static const struct i2c_device_id sii902x_i2c_ids[] = { + { "sii9022", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, sii902x_i2c_ids); + +static struct i2c_driver sii902x_driver = { + .probe = sii902x_probe, + .remove = sii902x_remove, + .driver = { + .name = "sii902x", + .of_match_table = sii902x_dt_ids, + }, + .id_table = sii902x_i2c_ids, +}; +module_i2c_driver(sii902x_driver); + +MODULE_AUTHOR("Boris Brezillon boris.brezillon@free-electrons.com"); +MODULE_DESCRIPTION("SII902x RGB -> HDMI bridges"); +MODULE_LICENSE("GPL");