[PATCH v11 06/10] memory: tegra124: Support interconnect framework

3 Dec 2020

Now Internal and External memory controllers are memory interconnection
providers. This allows us to use interconnect API for tuning of memory
configuration. EMC driver now supports OPPs and DVFS.
Tested-by: Nicolas Chauvet kwizart@gmail.com
Acked-by: Georgi Djakov georgi.djakov@linaro.org
Signed-off-by: Dmitry Osipenko digetx@gmail.com
---
 drivers/memory/tegra/Kconfig        |   1 +
 drivers/memory/tegra/tegra124-emc.c | 320 +++++++++++++++++++++++++++-
 drivers/memory/tegra/tegra124.c     |  82 ++++++-
 3 files changed, 391 insertions(+), 12 deletions(-)

diff --git a/drivers/memory/tegra/Kconfig b/drivers/memory/tegra/Kconfig
index f5b451403c58..a70967a56e52 100644
--- a/drivers/memory/tegra/Kconfig
+++ b/drivers/memory/tegra/Kconfig
@@ -36,6 +36,7 @@ config TEGRA124_EMC
    default y
    depends on TEGRA_MC && ARCH_TEGRA_124_SOC
    select TEGRA124_CLK_EMC
+	select PM_OPP
    help
      This driver is for the External Memory Controller (EMC) found on
      Tegra124 chips. The EMC controls the external DRAM on the board.
diff --git a/drivers/memory/tegra/tegra124-emc.c b/drivers/memory/tegra/tegra124-emc.c
index 8fb8c1af25c9..9706550bdd5d 100644
--- a/drivers/memory/tegra/tegra124-emc.c
+++ b/drivers/memory/tegra/tegra124-emc.c
@@ -12,20 +12,26 @@
 #include <linux/clk/tegra.h>
 #include <linux/debugfs.h>
 #include <linux/delay.h>
+#include <linux/interconnect-provider.h>
 #include <linux/io.h>
 #include <linux/module.h>
+#include <linux/mutex.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
+#include <linux/pm_opp.h>
 #include <linux/sort.h>
 #include <linux/string.h>
#include <soc/tegra/fuse.h>
 #include <soc/tegra/mc.h>
+#include "mc.h"
+
 #define EMC_FBIO_CFG5				0x104
 #define	EMC_FBIO_CFG5_DRAM_TYPE_MASK		0x3
 #define	EMC_FBIO_CFG5_DRAM_TYPE_SHIFT		0
+#define EMC_FBIO_CFG5_DRAM_WIDTH_X64		BIT(4)
#define EMC_INTSTATUS				0x0
 #define EMC_INTSTATUS_CLKCHANGE_COMPLETE	BIT(4)
@@ -461,6 +467,17 @@ struct emc_timing {
    u32 emc_zcal_interval;
 };
+enum emc_rate_request_type {
+	EMC_RATE_DEBUG,
+	EMC_RATE_ICC,
+	EMC_RATE_TYPE_MAX,
+};
+
+struct emc_rate_request {
+	unsigned long min_rate;
+	unsigned long max_rate;
+};
+
 struct tegra_emc {
    struct device *dev;
@@ -471,6 +488,7 @@ struct tegra_emc {
    struct clk *clk;
enum emc_dram_type dram_type;
+	unsigned int dram_bus_width;
    unsigned int dram_num;
struct emc_timing last_timing;
@@ -482,6 +500,17 @@ struct tegra_emc {
    	unsigned long min_rate;
    	unsigned long max_rate;
    } debugfs;
+
+	struct icc_provider provider;
+
+	/*
+	 * There are multiple sources in the EMC driver which could request
+	 * a min/max clock rate, these rates are contained in this array.
+	 */
+	struct emc_rate_request requested_rate[EMC_RATE_TYPE_MAX];
+
+	/* protect shared rate-change code path */
+	struct mutex rate_lock;
 };
/* Timing change sequence functions */
@@ -870,6 +899,14 @@ static void emc_read_current_timing(struct tegra_emc *emc,
 static int emc_init(struct tegra_emc *emc)
 {
    emc->dram_type = readl(emc->regs + EMC_FBIO_CFG5);
+
+	if (emc->dram_type & EMC_FBIO_CFG5_DRAM_WIDTH_X64)
+		emc->dram_bus_width = 64;
+	else
+		emc->dram_bus_width = 32;
+
+	dev_info(emc->dev, "%ubit DRAM bus\n", emc->dram_bus_width);
+
    emc->dram_type &= EMC_FBIO_CFG5_DRAM_TYPE_MASK;
    emc->dram_type >>= EMC_FBIO_CFG5_DRAM_TYPE_SHIFT;
@@ -1009,6 +1046,83 @@ tegra_emc_find_node_by_ram_code(struct device_node *node, u32 ram_code)
    return NULL;
 }
+static void tegra_emc_rate_requests_init(struct tegra_emc *emc)
+{
+	unsigned int i;
+
+	for (i = 0; i < EMC_RATE_TYPE_MAX; i++) {
+		emc->requested_rate[i].min_rate = 0;
+		emc->requested_rate[i].max_rate = ULONG_MAX;
+	}
+}
+
+static int emc_request_rate(struct tegra_emc *emc,
+			    unsigned long new_min_rate,
+			    unsigned long new_max_rate,
+			    enum emc_rate_request_type type)
+{
+	struct emc_rate_request *req = emc->requested_rate;
+	unsigned long min_rate = 0, max_rate = ULONG_MAX;
+	unsigned int i;
+	int err;
+
+	/* select minimum and maximum rates among the requested rates */
+	for (i = 0; i < EMC_RATE_TYPE_MAX; i++, req++) {
+		if (i == type) {
+			min_rate = max(new_min_rate, min_rate);
+			max_rate = min(new_max_rate, max_rate);
+		} else {
+			min_rate = max(req->min_rate, min_rate);
+			max_rate = min(req->max_rate, max_rate);
+		}
+	}
+
+	if (min_rate > max_rate) {
+		dev_err_ratelimited(emc->dev, "%s: type %u: out of range: %lu %lu\n",
+				    __func__, type, min_rate, max_rate);
+		return -ERANGE;
+	}
+
+	/*
+	 * EMC rate-changes should go via OPP API because it manages voltage
+	 * changes.
+	 */
+	err = dev_pm_opp_set_rate(emc->dev, min_rate);
+	if (err)
+		return err;
+
+	emc->requested_rate[type].min_rate = new_min_rate;
+	emc->requested_rate[type].max_rate = new_max_rate;
+
+	return 0;
+}
+
+static int emc_set_min_rate(struct tegra_emc *emc, unsigned long rate,
+			    enum emc_rate_request_type type)
+{
+	struct emc_rate_request *req = &emc->requested_rate[type];
+	int ret;
+
+	mutex_lock(&emc->rate_lock);
+	ret = emc_request_rate(emc, rate, req->max_rate, type);
+	mutex_unlock(&emc->rate_lock);
+
+	return ret;
+}
+
+static int emc_set_max_rate(struct tegra_emc *emc, unsigned long rate,
+			    enum emc_rate_request_type type)
+{
+	struct emc_rate_request *req = &emc->requested_rate[type];
+	int ret;
+
+	mutex_lock(&emc->rate_lock);
+	ret = emc_request_rate(emc, req->min_rate, rate, type);
+	mutex_unlock(&emc->rate_lock);
+
+	return ret;
+}
+
 /*
  * debugfs interface
  *
@@ -1081,7 +1195,7 @@ static int tegra_emc_debug_min_rate_set(void *data, u64 rate)
    if (!tegra_emc_validate_rate(emc, rate))
    	return -EINVAL;
-	err = clk_set_min_rate(emc->clk, rate);
+	err = emc_set_min_rate(emc, rate, EMC_RATE_DEBUG);
    if (err < 0)
    	return err;
@@ -1111,7 +1225,7 @@ static int tegra_emc_debug_max_rate_set(void *data, u64 rate)
    if (!tegra_emc_validate_rate(emc, rate))
    	return -EINVAL;
-	err = clk_set_max_rate(emc->clk, rate);
+	err = emc_set_max_rate(emc, rate, EMC_RATE_DEBUG);
    if (err < 0)
    	return err;
@@ -1129,15 +1243,6 @@ static void emc_debugfs_init(struct device *dev, struct tegra_emc *emc)
    unsigned int i;
    int err;
-	emc->clk = devm_clk_get(dev, "emc");
-	if (IS_ERR(emc->clk)) {
-		if (PTR_ERR(emc->clk) != -ENODEV) {
-			dev_err(dev, "failed to get EMC clock: %ld\n",
-				PTR_ERR(emc->clk));
-			return;
-		}
-	}
-
    emc->debugfs.min_rate = ULONG_MAX;
    emc->debugfs.max_rate = 0;
@@ -1177,6 +1282,177 @@ static void emc_debugfs_init(struct device *dev, struct tegra_emc *emc)
    		    emc, &tegra_emc_debug_max_rate_fops);
 }
+static inline struct tegra_emc *
+to_tegra_emc_provider(struct icc_provider *provider)
+{
+	return container_of(provider, struct tegra_emc, provider);
+}
+
+static struct icc_node_data *
+emc_of_icc_xlate_extended(struct of_phandle_args *spec, void *data)
+{
+	struct icc_provider *provider = data;
+	struct icc_node_data *ndata;
+	struct icc_node *node;
+
+	/* External Memory is the only possible ICC route */
+	list_for_each_entry(node, &provider->nodes, node_list) {
+		if (node->id != TEGRA_ICC_EMEM)
+			continue;
+
+		ndata = kzalloc(sizeof(*ndata), GFP_KERNEL);
+		if (!ndata)
+			return ERR_PTR(-ENOMEM);
+
+		/*
+		 * SRC and DST nodes should have matching TAG in order to have
+		 * it set by default for a requested path.
+		 */
+		ndata->tag = TEGRA_MC_ICC_TAG_ISO;
+		ndata->node = node;
+
+		return ndata;
+	}
+
+	return ERR_PTR(-EPROBE_DEFER);
+}
+
+static int emc_icc_set(struct icc_node *src, struct icc_node *dst)
+{
+	struct tegra_emc *emc = to_tegra_emc_provider(dst->provider);
+	unsigned long long peak_bw = icc_units_to_bps(dst->peak_bw);
+	unsigned long long avg_bw = icc_units_to_bps(dst->avg_bw);
+	unsigned long long rate = max(avg_bw, peak_bw);
+	unsigned int dram_data_bus_width_bytes;
+	const unsigned int ddr = 2;
+	int err;
+
+	/*
+	 * Tegra124 EMC runs on a clock rate of SDRAM bus. This means that
+	 * EMC clock rate is twice smaller than the peak data rate because
+	 * data is sampled on both EMC clock edges.
+	 */
+	dram_data_bus_width_bytes = emc->dram_bus_width / 8;
+	do_div(rate, ddr * dram_data_bus_width_bytes);
+	rate = min_t(u64, rate, U32_MAX);
+
+	err = emc_set_min_rate(emc, rate, EMC_RATE_ICC);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+static int tegra_emc_interconnect_init(struct tegra_emc *emc)
+{
+	const struct tegra_mc_soc *soc = emc->mc->soc;
+	struct icc_node *node;
+	int err;
+
+	emc->provider.dev = emc->dev;
+	emc->provider.set = emc_icc_set;
+	emc->provider.data = &emc->provider;
+	emc->provider.aggregate = soc->icc_ops->aggregate;
+	emc->provider.xlate_extended = emc_of_icc_xlate_extended;
+
+	err = icc_provider_add(&emc->provider);
+	if (err)
+		goto err_msg;
+
+	/* create External Memory Controller node */
+	node = icc_node_create(TEGRA_ICC_EMC);
+	if (IS_ERR(node)) {
+		err = PTR_ERR(node);
+		goto del_provider;
+	}
+
+	node->name = "External Memory Controller";
+	icc_node_add(node, &emc->provider);
+
+	/* link External Memory Controller to External Memory (DRAM) */
+	err = icc_link_create(node, TEGRA_ICC_EMEM);
+	if (err)
+		goto remove_nodes;
+
+	/* create External Memory node */
+	node = icc_node_create(TEGRA_ICC_EMEM);
+	if (IS_ERR(node)) {
+		err = PTR_ERR(node);
+		goto remove_nodes;
+	}
+
+	node->name = "External Memory (DRAM)";
+	icc_node_add(node, &emc->provider);
+
+	return 0;
+
+remove_nodes:
+	icc_nodes_remove(&emc->provider);
+del_provider:
+	icc_provider_del(&emc->provider);
+err_msg:
+	dev_err(emc->dev, "failed to initialize ICC: %d\n", err);
+
+	return err;
+}
+
+static int tegra_emc_opp_table_init(struct tegra_emc *emc)
+{
+	u32 hw_version = BIT(tegra_sku_info.soc_speedo_id);
+	struct opp_table *clk_opp_table, *hw_opp_table;
+	int err;
+
+	clk_opp_table = dev_pm_opp_set_clkname(emc->dev, NULL);
+	err = PTR_ERR_OR_ZERO(clk_opp_table);
+	if (err) {
+		dev_err(emc->dev, "failed to set OPP clk: %d\n", err);
+		return err;
+	}
+
+	hw_opp_table = dev_pm_opp_set_supported_hw(emc->dev, &hw_version, 1);
+	err = PTR_ERR_OR_ZERO(hw_opp_table);
+	if (err) {
+		dev_err(emc->dev, "failed to set OPP supported HW: %d\n", err);
+		goto put_clk_table;
+	}
+
+	err = dev_pm_opp_of_add_table(emc->dev);
+	if (err) {
+		if (err == -ENODEV)
+			dev_err(emc->dev, "OPP table not found, please update your device tree\n");
+		else
+			dev_err(emc->dev, "failed to add OPP table: %d\n", err);
+
+		goto put_hw_table;
+	}
+
+	dev_info(emc->dev, "OPP HW ver. 0x%x, current clock rate %lu MHz\n",
+		 hw_version, clk_get_rate(emc->clk) / 1000000);
+
+	/* first dummy rate-set initializes voltage state */
+	err = dev_pm_opp_set_rate(emc->dev, clk_get_rate(emc->clk));
+	if (err) {
+		dev_err(emc->dev, "failed to initialize OPP clock: %d\n", err);
+		goto remove_table;
+	}
+
+	return 0;
+
+remove_table:
+	dev_pm_opp_of_remove_table(emc->dev);
+put_hw_table:
+	dev_pm_opp_put_supported_hw(hw_opp_table);
+put_clk_table:
+	dev_pm_opp_put_clkname(clk_opp_table);
+
+	return err;
+}
+
+static void devm_tegra_emc_unset_callback(void *data)
+{
+	tegra124_clk_set_emc_callbacks(NULL, NULL);
+}
+
 static int tegra_emc_probe(struct platform_device *pdev)
 {
    struct device_node *np;
@@ -1188,6 +1464,7 @@ static int tegra_emc_probe(struct platform_device *pdev)
    if (!emc)
    	return -ENOMEM;
+	mutex_init(&emc->rate_lock);
    emc->dev = &pdev->dev;
emc->regs = devm_platform_ioremap_resource(pdev, 0);
@@ -1223,9 +1500,29 @@ static int tegra_emc_probe(struct platform_device *pdev)
    tegra124_clk_set_emc_callbacks(tegra_emc_prepare_timing_change,
    			       tegra_emc_complete_timing_change);
+	err = devm_add_action_or_reset(&pdev->dev, devm_tegra_emc_unset_callback,
+				       NULL);
+	if (err)
+		return err;
+
+	emc->clk = devm_clk_get(&pdev->dev, "emc");
+	if (IS_ERR(emc->clk)) {
+		err = PTR_ERR(emc->clk);
+		dev_err(&pdev->dev, "failed to get EMC clock: %d\n", err);
+		return err;
+	}
+
+	err = tegra_emc_opp_table_init(emc);
+	if (err)
+		return err;
+
+	tegra_emc_rate_requests_init(emc);
+
    if (IS_ENABLED(CONFIG_DEBUG_FS))
    	emc_debugfs_init(&pdev->dev, emc);
+	tegra_emc_interconnect_init(emc);
+
    /*
     * Don't allow the kernel module to be unloaded. Unloading adds some
     * extra complexity which doesn't really worth the effort in a case of
@@ -1242,6 +1539,7 @@ static struct platform_driver tegra_emc_driver = {
    	.name = "tegra-emc",
    	.of_match_table = tegra_emc_of_match,
    	.suppress_bind_attrs = true,
+		.sync_state = icc_sync_state,
    },
 };
 module_platform_driver(tegra_emc_driver);
diff --git a/drivers/memory/tegra/tegra124.c b/drivers/memory/tegra/tegra124.c
index e2389573d3c0..459211f50c08 100644
--- a/drivers/memory/tegra/tegra124.c
+++ b/drivers/memory/tegra/tegra124.c
@@ -4,7 +4,8 @@
  */
#include <linux/of.h>
-#include <linux/mm.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
#include <dt-bindings/memory/tegra124-mc.h>
@@ -1010,6 +1011,83 @@ static const struct tegra_mc_reset tegra124_mc_resets[] = {
    TEGRA124_MC_RESET(GPU,       0x970, 0x974,  2),
 };
+static int tegra124_mc_icc_set(struct icc_node *src, struct icc_node *dst)
+{
+	/* TODO: program PTSA */
+	return 0;
+}
+
+static int tegra124_mc_icc_aggreate(struct icc_node *node, u32 tag, u32 avg_bw,
+				    u32 peak_bw, u32 *agg_avg, u32 *agg_peak)
+{
+	/*
+	 * ISO clients need to reserve extra bandwidth up-front because
+	 * there could be high bandwidth pressure during initial filling
+	 * of the client's FIFO buffers.  Secondly, we need to take into
+	 * account impurities of the memory subsystem.
+	 */
+	if (tag & TEGRA_MC_ICC_TAG_ISO)
+		peak_bw = tegra_mc_scale_percents(peak_bw, 400);
+
+	*agg_avg += avg_bw;
+	*agg_peak = max(*agg_peak, peak_bw);
+
+	return 0;
+}
+
+static struct icc_node_data *
+tegra124_mc_of_icc_xlate_extended(struct of_phandle_args *spec, void *data)
+{
+	struct tegra_mc *mc = icc_provider_to_tegra_mc(data);
+	const struct tegra_mc_client *client;
+	unsigned int i, idx = spec->args[0];
+	struct icc_node_data *ndata;
+	struct icc_node *node;
+
+	list_for_each_entry(node, &mc->provider.nodes, node_list) {
+		if (node->id != idx)
+			continue;
+
+		ndata = kzalloc(sizeof(*ndata), GFP_KERNEL);
+		if (!ndata)
+			return ERR_PTR(-ENOMEM);
+
+		client = &mc->soc->clients[idx];
+		ndata->node = node;
+
+		switch (client->swgroup) {
+		case TEGRA_SWGROUP_DC:
+		case TEGRA_SWGROUP_DCB:
+		case TEGRA_SWGROUP_PTC:
+		case TEGRA_SWGROUP_VI:
+			/* these clients are isochronous by default */
+			ndata->tag = TEGRA_MC_ICC_TAG_ISO;
+			break;
+
+		default:
+			ndata->tag = TEGRA_MC_ICC_TAG_DEFAULT;
+			break;
+		}
+
+		return ndata;
+	}
+
+	for (i = 0; i < mc->soc->num_clients; i++) {
+		if (mc->soc->clients[i].id == idx)
+			return ERR_PTR(-EPROBE_DEFER);
+	}
+
+	dev_err(mc->dev, "invalid ICC client ID %u\n", idx);
+
+	return ERR_PTR(-EINVAL);
+}
+
+static const struct tegra_mc_icc_ops tegra124_mc_icc_ops = {
+	.xlate_extended = tegra124_mc_of_icc_xlate_extended,
+	.aggregate = tegra124_mc_icc_aggreate,
+	.set = tegra124_mc_icc_set,
+};
+
 #ifdef CONFIG_ARCH_TEGRA_124_SOC
 static const unsigned long tegra124_mc_emem_regs[] = {
    MC_EMEM_ARB_CFG,
@@ -1061,6 +1139,7 @@ const struct tegra_mc_soc tegra124_mc_soc = {
    .reset_ops = &tegra_mc_reset_ops_common,
    .resets = tegra124_mc_resets,
    .num_resets = ARRAY_SIZE(tegra124_mc_resets),
+	.icc_ops = &tegra124_mc_icc_ops,
 };
 #endif /* CONFIG_ARCH_TEGRA_124_SOC */
@@ -1091,5 +1170,6 @@ const struct tegra_mc_soc tegra132_mc_soc = {
    .reset_ops = &tegra_mc_reset_ops_common,
    .resets = tegra124_mc_resets,
    .num_resets = ARRAY_SIZE(tegra124_mc_resets),
+	.icc_ops = &tegra124_mc_icc_ops,
 };
 #endif /* CONFIG_ARCH_TEGRA_132_SOC */
-- 
2.29.2


    

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

[PATCH v11 06/10] memory: tegra124: Support interconnect framework