Pixel Extension are extra pixels fed to the QSEED2 scalar; this information is needed to produce an output image. These values depend on various parameters, such as scalar type, initial phase, phase step, etc.
Pixel extension values used to be handled and calculated by hardware; however, software could also overwrite those values for optimization.
In some hardware (eg: MDP5 v1.7), software *must* program those values since they are not handled in hardware.
Change-Id: I4900165e770f8da702a4f938044616daf5aa81af Signed-off-by: Stephane Viau sviau@codeaurora.org --- rnndb/mdp/mdp5.xml | 24 ++++++++++++++++++++++++ rnndb/mdp/mdp_common.xml | 7 +++++++ 2 files changed, 31 insertions(+)
diff --git a/rnndb/mdp/mdp5.xml b/rnndb/mdp/mdp5.xml index df02377..c829737 100644 --- a/rnndb/mdp/mdp5.xml +++ b/rnndb/mdp/mdp5.xml @@ -390,6 +390,7 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <bitfield name="IGC_ROM_1" pos="18" type="boolean"/> <bitfield name="DEINTERLACE" pos="22" type="boolean"/> <bitfield name="DEINTERLACE_ODD" pos="23" type="boolean"/> + <bitfield name="SW_PIX_EXT_OVERRIDE" pos="31" type="boolean"/> </reg32> <reg32 offset="0x03c" name="SRC_CONSTANT_COLOR"/> <reg32 offset="0x048" name="FETCH_CONFIG"/> @@ -406,6 +407,29 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <bitfield name="VERT" low="0" high="7" type="uint"/> <bitfield name="HORZ" low="8" high="15" type="uint"/> </reg32> + <array offsets="0x100,0x110,0x120" name="SW_PIX_EXT" length="3" stride="0x10" index="mdp_component_type"> + <!-- + Notes: + o These value only take effect if SW_PIX_EXT_OVERRIDE is set in SRC_OP_MODE register + o For signed values (int): + indicates overfetch, - indicates line drop + --> + <reg32 offset="0x00" name="LR"> + <bitfield name="LEFT_RPT" low="0" high="7" type="uint"/> + <bitfield name="LEFT_OVF" low="8" high="15" type="int"/> + <bitfield name="RIGHT_RPT" low="16" high="23" type="uint"/> + <bitfield name="RIGHT_OVF" low="24" high="31" type="int"/> + </reg32> + <reg32 offset="0x04" name="TB"> + <bitfield name="TOP_RPT" low="0" high="7" type="uint"/> + <bitfield name="TOP_OVF" low="8" high="15" type="int"/> + <bitfield name="BOTTOM_RPT" low="16" high="23" type="uint"/> + <bitfield name="BOTTOM_OVF" low="24" high="31" type="int"/> + </reg32> + <reg32 offset="0x08" name="REQ_PIXELS"> + <bitfield name="LEFT_RIGHT" low="0" high="15" type="uint"/> + <bitfield name="TOP_BOTTOM" low="16" high="31" type="uint"/> + </reg32> + </array> <reg32 offset="0x204" name="SCALE_CONFIG"> <bitfield name="SCALEX_EN" pos="0" type="boolean"/> <bitfield name="SCALEY_EN" pos="1" type="boolean"/> diff --git a/rnndb/mdp/mdp_common.xml b/rnndb/mdp/mdp_common.xml index 5e8e421..226596a 100644 --- a/rnndb/mdp/mdp_common.xml +++ b/rnndb/mdp/mdp_common.xml @@ -39,6 +39,13 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd"> <value name="BG_PIXEL" value="3"/> </enum>
+<enum name="mdp_component_type"> + <value name="COMP_0" value="0"/> <!-- Y component --> + <value name="COMP_1_2" value="1"/> <!-- Cb/Cr comp. --> + <value name="COMP_3" value="2"/> <!-- Trans comp. --> + <value name="COMP_MAX" value="3"/> +</enum> + <enum name="mdp_bpc"> <brief>bits per component (non-alpha channel)</brief> <value name="BPC1" value="0"/> <!-- 1 bit -->