[PATCH v3 14/18] arm64: dts: allwinner: a64: nanopi-a64: Enable HDMI output

Enable all necessary HDMI pipeline nodes with HDMI out connector on nanopi-a64 board.

Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- Changes for v3: - Enable all pipeline components Changes for v2: - none

.../dts/allwinner/sun50i-a64-nanopi-a64.dts | 34 +++++++++++++++++++ 1 file changed, 34 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts index 98dbff19f5cc..5395069bf541 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-nanopi-a64.dts @@ -57,6 +57,21 @@ chosen { stdout-path = "serial0:115200n8"; }; + + connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; +}; + +&de { + status = "okay"; };

&ehci0 { @@ -67,6 +82,17 @@ status = "okay"; };

+&hdmi { + hvcc-supply = <&reg_dldo1>; + status = "okay"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + /* i2c1 connected with gpio headers like pine64, bananapi */ &i2c1 { pinctrl-names = "default"; @@ -78,6 +104,10 @@ bias-pull-up; };

+&mixer1 { + status = "okay"; +}; + &mmc0 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_pins>; @@ -199,6 +229,10 @@ vcc-hdmi-supply = <&reg_dldo1>; };

+&tcon1 { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>;