On 2014年11月14日 19:16, Zubair Lutfullah Kakakhel wrote:
On 14/11/14 11:13, Andy Yan wrote:
On 2014年11月14日 18:53, Zubair Lutfullah Kakakhel wrote:
On 14/11/14 10:37, Andy Yan wrote:
On 2014年11月14日 18:23, Zubair Lutfullah Kakakhel wrote:
Hi Andy
On 14/11/14 03:31, Andy Yan wrote:
Rockchip RK3288 hdmi is compatible with dw_hdmi
Signed-off-by: Andy Yan andy.yan@rock-chips.com
Changes in v10:
- add more display mode support mpll configuration for rk3288
Changes in v9:
- move some phy configuration to platform driver
Changes in v8: None Changes in v7: None Changes in v6: None Changes in v5: None Changes in v4: None Changes in v3: None Changes in v2: None
drivers/gpu/drm/bridge/dw_hdmi.c | 10 + drivers/gpu/drm/bridge/dw_hdmi.h | 3 +- drivers/gpu/drm/rockchip/Kconfig | 10 + drivers/gpu/drm/rockchip/Makefile | 2 +- drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 355 ++++++++++++++++++++++++++++ include/drm/bridge/dw_hdmi.h | 1 + 6 files changed, 379 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.cdiff --git a/drivers/gpu/drm/bridge/dw_hdmi.c b/drivers/gpu/drm/bridge/dw_hdmi.c index a2876fe..1dd1f0b 100644 --- a/drivers/gpu/drm/bridge/dw_hdmi.c +++ b/drivers/gpu/drm/bridge/dw_hdmi.c @@ -715,6 +715,13 @@ static void dw_hdmi_phy_enable_tmds(struct dw_hdmi *hdmi, u8 enable) HDMI_PHY_CONF0_ENTMDS_MASK); } +static void dw_hdmi_phy_enable_spare(struct dw_hdmi *hdmi, u8 enable) +{
- hdmi_mask_writeb(hdmi, enable, HDMI_PHY_CONF0,
HDMI_PHY_CONF0_SPARECTRL_OFFSET,HDMI_PHY_CONF0_SPARECTRL_MASK);+}
What does enable spare do? Can other future SoCs use it?
This looks like DW specific. And can be a separate commit that adds a feature to the dw hdmi driver.
Actually I am not very clearly about this bit, but RK3288 HDMI will not work without this bit enable. On imx6, the description about this bit is:Reserved. Spare pin control. On rk3288, the description is: svsret/sparectrl Both are very simple.Sounds like the IP Core in the rk3288 is slightly upgraded. Separate this section in a different commit as it is generic DW stuff.
And add what you wrote above in the commit message.
Only Separate function dw_hdmi_phy_enale_spare ? not include if (hdmi->dev_type == rk3288_hdmi) dw_hdmi_enable_phy_spare(hdmi, 1); ?
Yes. Separate dw_hdmi_phy_enable_spare and its associated defines HDMI_PHY_CONF0_SPARECTRL_OFFSET HDMI_PHY_CONF0_SPARECTRL_MASK in the header as one commit.
The if (hdmi->dev_type == rk3288_hdmi) code is part of the add rk3288 support.
ZubairLK
Many thanks :-)
Linux-rockchip mailing list Linux-rockchip@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-rockchip