Hotplug events reported by bridge drivers over drm_bridge_hpd_notify() get ignored unless somebody calls drm_bridge_hpd_enable(). When the connector for the bridge is bridge_connector, such a call is done from drm_bridge_connector_enable_hpd().
However drm_bridge_connector_enable_hpd() is never called on init paths, documentation suggests that it is intended for suspend/resume paths.
In result, once encoders are switched to bridge_connector, bridge-detected HPD stops working.
This patch adds a call to that API on init path.
This fixes HDMI HPD with rcar-du + adv7513 case when adv7513 reports HPD events via interrupts.
Fixes: c24110a8fd09 ("drm: rcar-du: Use drm_bridge_connector_init() helper") Signed-off-by: Nikita Yushchenko nikita.yoush@cogentembedded.com --- drivers/gpu/drm/drm_bridge_connector.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_bridge_connector.c b/drivers/gpu/drm/drm_bridge_connector.c index 791379816837..4f20137ef21d 100644 --- a/drivers/gpu/drm/drm_bridge_connector.c +++ b/drivers/gpu/drm/drm_bridge_connector.c @@ -369,8 +369,10 @@ struct drm_connector *drm_bridge_connector_init(struct drm_device *drm, connector_type, ddc); drm_connector_helper_add(connector, &drm_bridge_connector_helper_funcs);
- if (bridge_connector->bridge_hpd) + if (bridge_connector->bridge_hpd) { connector->polled = DRM_CONNECTOR_POLL_HPD; + drm_bridge_connector_enable_hpd(connector); + } else if (bridge_connector->bridge_detect) connector->polled = DRM_CONNECTOR_POLL_CONNECT | DRM_CONNECTOR_POLL_DISCONNECT;