Hi Nikolaus,
Le mer., nov. 10 2021 at 20:43:30 +0100, H. Nikolaus Schaller hns@goldelico.com a écrit :
From: Paul Boddie paul@boddie.org.uk
A specialisation of the generic Synopsys HDMI driver is employed for JZ4780 HDMI support. This requires a new driver, plus device tree and configuration modifications.
Signed-off-by: Paul Boddie paul@boddie.org.uk Signed-off-by: H. Nikolaus Schaller hns@goldelico.com
arch/mips/boot/dts/ingenic/jz4780.dtsi | 40 ++++++++++++++++++++++++++ 1 file changed, 40 insertions(+)
diff --git a/arch/mips/boot/dts/ingenic/jz4780.dtsi b/arch/mips/boot/dts/ingenic/jz4780.dtsi index 9e34f433b9b58..98cc3360bbbb9 100644 --- a/arch/mips/boot/dts/ingenic/jz4780.dtsi +++ b/arch/mips/boot/dts/ingenic/jz4780.dtsi @@ -424,6 +424,46 @@ i2c4: i2c@10054000 { status = "disabled"; };
- hdmi: hdmi@10180000 {
compatible = "ingenic,jz4780-dw-hdmi";reg = <0x10180000 0x8000>;reg-io-width = <4>;clocks = <&cgu JZ4780_CLK_AHB0>, <&cgu JZ4780_CLK_HDMI>;clock-names = "iahb", "isfr";interrupt-parent = <&intc>;interrupts = <3>;status = "disabled";- };
- lcdc0: lcdc0@13050000 {
compatible = "ingenic,jz4780-lcd";reg = <0x13050000 0x1800>;clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD0PIXCLK>;clock-names = "lcd", "lcd_pclk";interrupt-parent = <&intc>;interrupts = <31>;status = "disabled";- };
- lcdc1: lcdc1@130a0000 {
compatible = "ingenic,jz4780-lcd";reg = <0x130a0000 0x1800>;clocks = <&cgu JZ4780_CLK_TVE>, <&cgu JZ4780_CLK_LCD1PIXCLK>;clock-names = "lcd", "lcd_pclk";interrupt-parent = <&intc>;interrupts = <31>;
You have the two LCD controllers wired to the same interrupt, that can't be right.
From what I can read in the PM the LCD1 IRQ is number 23.
Cheers, -Paul
status = "disabled";- };
- nemc: nemc@13410000 { compatible = "ingenic,jz4780-nemc", "simple-mfd"; reg = <0x13410000 0x10000>;
-- 2.33.0