changes v4: - add vref-supply to adc@0 - split gpio assignment for the mdio node
changes v3: - drop panel bindings patches, it is already in drm-misc-next - remove some new lines - reorder compatibles at the start of the nodes - use lowercase for hex value - add enable-active-high to the regulator-vcc-mmc-io and fix MMC voltage configuration.
changes v2: - remove unnecessary newlines. - change linux,wakeup to wakeup-source - change switch@3 unit-address to @0 - sort aliases alphabetically
Mainline imx6 based DTs for SKOV A/S boards
Oleksij Rempel (2): dt-bindings: vendor-prefixes: Add an entry for SKOV A/S dt-bindings: arm: fsl: add SKOV imx6q and imx6dl based boards
Sam Ravnborg (1): ARM: dts: add SKOV imx6q and imx6dl based boards
.../devicetree/bindings/arm/fsl.yaml | 5 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm/boot/dts/Makefile | 5 + arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts | 13 + arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts | 106 ++++ arch/arm/boot/dts/imx6q-skov-revc-lt2.dts | 36 ++ arch/arm/boot/dts/imx6q-skov-revc-lt6.dts | 128 +++++ .../dts/imx6q-skov-reve-mi1010ait-1cp1.dts | 127 +++++ arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi | 54 ++ arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi | 477 ++++++++++++++++++ 10 files changed, 953 insertions(+) create mode 100644 arch/arm/boot/dts/imx6dl-skov-revc-lt2.dts create mode 100644 arch/arm/boot/dts/imx6dl-skov-revc-lt6.dts create mode 100644 arch/arm/boot/dts/imx6q-skov-revc-lt2.dts create mode 100644 arch/arm/boot/dts/imx6q-skov-revc-lt6.dts create mode 100644 arch/arm/boot/dts/imx6q-skov-reve-mi1010ait-1cp1.dts create mode 100644 arch/arm/boot/dts/imx6qdl-skov-cpu-revc.dtsi create mode 100644 arch/arm/boot/dts/imx6qdl-skov-cpu.dtsi