Hi Peter,
On Friday, 23 March 2018 10:31:53 EEST Peter Ujfalusi wrote:
On 2018-03-22 15:42, Peter Ujfalusi wrote:
From: Tomi Valkeinen tomi.valkeinen@ti.com
Define unique compatible string for the DMM in DRA7xx family.
The new compatible can be used to apply DRA7xx specific workarounds for ERRATAs, like i878 (MPU Lockup with concurrent DMM and EMIF accesses)
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com
I have failed to add: Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com
That's not mandatory. The SoB line only serves to notify that you adhere to the developer's certificate of origin as documented in Documentation/process/ submitting-patches.rst. If you haven't modified this patch, and if you intend to get it picked from the mailing list (as opposed to getting it pulled from your tree), you don't need to add your SoB.
Documentation/devicetree/bindings/arm/omap/dmm.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/arm/omap/dmm.txt b/Documentation/devicetree/bindings/arm/omap/dmm.txt index 8bd6d0a238a8..bbbe7cdba30c 100644 --- a/Documentation/devicetree/bindings/arm/omap/dmm.txt +++ b/Documentation/devicetree/bindings/arm/omap/dmm.txt @@ -8,7 +8,8 @@ translation for initiators which need contiguous dma bus addresses.> Required properties:
compatible: Should contain "ti,omap4-dmm" for OMAP4 family
Should contain "ti,omap5-dmm" for OMAP5 and DRA7x family
Should contain "ti,omap5-dmm" for OMAP5 familyShould contain "ti,dra7-dmm" for DRA7xx family
- reg: Contains DMM register address range (base address and length)
- interrupts: Should contain an interrupt-specifier for DMM_IRQ.
- ti,hwmods: Name of the hwmod associated to DMM, which is typically
"dmm"