Hi Miquel.
On Tue, Dec 24, 2019 at 03:19:05PM +0100, Miquel Raynal wrote:
Add support for the Satoz SAT050AT40H12R2 RGB panel.
Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com
Changes since v2:
- Dropped two uneeded lines which would fail the build.
Changes since v1:
- Switched to display_timing's instead of display_mode.
drivers/gpu/drm/panel/panel-simple.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index ac6f6b5d200d..cc1595c5633a 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -2559,6 +2559,29 @@ static const struct panel_desc samsung_ltn140at29_301 = { }, };
+static const struct display_timing satoz_sat050at40h12r2_timing = {
- .pixelclock = { 33300000, 33300000, 50000000 },
- .hactive = {800, 800, 800},
- .hfront_porch = {16, 210, 354},
- .hback_porch = {46, 46, 46},
- .hsync_len = {1, 1, 40},
- .vactive = {480, 480, 480},
- .vfront_porch = {7, 22, 147},
- .vback_porch = {23, 23, 23},
- .vsync_len = {1, 1, 20},
+};
+static const struct panel_desc satoz_sat050at40h12r2 = {
- .timings = &satoz_sat050at40h12r2_timing,
- .num_timings = 1,
- .bpc = 8,
- .size = {
.width = 108,.height = 65,- },
- .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+};
Please add connector_type as well. This is mandatory for all new panels.
Sam