From: Jitao Shi jitao.shi@mediatek.com
Old sequence: 1. Pull the MIPI signal high 2. Delay & Dsi_reset 3. Set the dsi timing register 4. dsi clk & lanes leave ulp mode and enter hs mode
The sequence after patching is: 1. Set the dsi timing register 2. Pull the MIPI signal high 3. Delay & Dsi_reset 4. dsi clk & lanes leave ulp mode and enter hs mode
Fixes: 2dd8075d2185 ("drm/mediatek: mtk_dsi: Use the drm_panel_bridge API")
Signed-off-by: Jitao Shi jitao.shi@mediatek.com Signed-off-by: Xinlei Lee xinlei.lee@mediatek.com --- drivers/gpu/drm/mediatek/mtk_dsi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c index ccb0511b9cd5..262c027d8c2f 100644 --- a/drivers/gpu/drm/mediatek/mtk_dsi.c +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c @@ -649,14 +649,14 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi) mtk_dsi_reset_engine(dsi); mtk_dsi_phy_timconfig(dsi);
- mtk_dsi_rxtx_control(dsi); - usleep_range(30, 100); - mtk_dsi_reset_dphy(dsi); mtk_dsi_ps_control_vact(dsi); mtk_dsi_set_vm_cmd(dsi); mtk_dsi_config_vdo_timing(dsi); mtk_dsi_set_interrupt_enable(dsi);
+ mtk_dsi_rxtx_control(dsi); + usleep_range(30, 100); + mtk_dsi_reset_dphy(dsi); mtk_dsi_clk_ulp_mode_leave(dsi); mtk_dsi_lane0_ulp_mode_leave(dsi); mtk_dsi_clk_hs_mode(dsi, 0);