The CRC PWM controller has a clock-divider which divides the clock with a value between 1-128. But as can seen from the PWM_DIV_CLK_xxx defines, this range maps to a register value of 0-127.
So after calculating the clock-divider we must subtract 1 to get the register value, unless the requested frequency was so high that the calculation has already resulted in a (rounded) divider value of 0.
Note that before this fix, setting a period of PWM_MAX_PERIOD_NS which corresponds to the max. divider value of 128 could have resulted in a bug where the code would use 128 as divider-register value which would have resulted in an actual divider value of 0 (and the enable bit being set). A rounding error stopped this bug from actually happen. This same rounding error means that after the subtraction of 1 it is impossible to set the divider to 128. Also bump PWM_MAX_PERIOD_NS by 1 ns to allow setting a divider of 128 (register-value 127).
Signed-off-by: Hans de Goede hdegoede@redhat.com --- Changes in v3: - Introduce crc_pwm_calc_clk_div() here instead of later in the patch-set to reduce the amount of churn in the patch-set a bit --- drivers/pwm/pwm-crc.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/drivers/pwm/pwm-crc.c b/drivers/pwm/pwm-crc.c index c056eb9b858c..44ec7d5b63e1 100644 --- a/drivers/pwm/pwm-crc.c +++ b/drivers/pwm/pwm-crc.c @@ -22,7 +22,7 @@ #define PWM_MAX_LEVEL 0xFF
#define PWM_BASE_CLK_MHZ 6 /* 6 MHz */ -#define PWM_MAX_PERIOD_NS 5461333 /* 183 Hz */ +#define PWM_MAX_PERIOD_NS 5461334 /* 183 Hz */
/** * struct crystalcove_pwm - Crystal Cove PWM controller @@ -39,6 +39,18 @@ static inline struct crystalcove_pwm *to_crc_pwm(struct pwm_chip *pc) return container_of(pc, struct crystalcove_pwm, chip); }
+static int crc_pwm_calc_clk_div(int period_ns) +{ + int clk_div; + + clk_div = PWM_BASE_CLK_MHZ * period_ns / (256 * NSEC_PER_USEC); + /* clk_div 1 - 128, maps to register values 0-127 */ + if (clk_div > 0) + clk_div--; + + return clk_div; +} + static int crc_pwm_enable(struct pwm_chip *c, struct pwm_device *pwm) { struct crystalcove_pwm *crc_pwm = to_crc_pwm(c); @@ -68,11 +80,10 @@ static int crc_pwm_config(struct pwm_chip *c, struct pwm_device *pwm, }
if (pwm_get_period(pwm) != period_ns) { - int clk_div; + int clk_div = crc_pwm_calc_clk_div(period_ns);
/* changing the clk divisor, need to disable fisrt */ crc_pwm_disable(c, pwm); - clk_div = PWM_BASE_CLK_MHZ * period_ns / (256 * NSEC_PER_USEC);
regmap_write(crc_pwm->regmap, PWM0_CLK_DIV, clk_div | PWM_OUTPUT_ENABLE);