https://bugzilla.kernel.org/show_bug.cgi?id=201539
MasterCATZ (mastercatz@hotmail.com) changed:
What |Removed |Added ---------------------------------------------------------------------------- CC| |mastercatz@hotmail.com
--- Comment #21 from MasterCATZ (mastercatz@hotmail.com) --- Having simular issues with 5.3.8-050308-generic
when it starts happening this is being spammed in dmesg
amdgpu: [powerplay] failed to send message 282 ret is 254
I loose write acess to /sys/class/drm/card1/device/hwmon/hwmon1/pwm1_enable
it is stuck on 2 , and runs the fans super low @ 20% causing the GPU to reach thermalmelt down 96 deg when the fan will do blips of 100% my bios was modded to even have a minimum fan speed of 50% and even this is being over written
/sys/class/drm/card1/device/hwmon/hwmon1/pwm1 also can not adjust
GRUB_CMDLINE_LINUX_DEFAULT="amdgpu.ppfeaturemask=0xffffffff amdgpu.dc=1 amdgpu.gpu_recovery=1 amdgpu.cik_support=1 amdgpu.dpm=1 radeon.cik_support=0"
if I reboot it works for a little while allowing me to change GPU speeds and fan speeds then .. I loose fan speed control and can not get it back off auto , which seems to be setup with fans speeds way too low
GL_RENDERER: AMD Radeon R9 200 Series (HAWAII, DRM 3.33.0, 5.3.8-050308-generic, LLVM 9.0.0) GL_VERSION: 4.5 (Compatibility Profile) Mesa 19.3.0-devel (git-ff6e148 2019-10-29 bionic-oibaf-ppa)
if I disable amdgpu.dpm I can control the fans but then I can not do Auto GPU speeds and can not manually do my speeds
my only guess is the firmware being loaded by kernel is the place containing the info for fan speeds ?