Hi,
This patchset adds a missing piece for decommissioning the staging/fbtft/fb_st7735r.c driver namely a way to configure the controller from Device Tree.
All fbtft drivers have builtin support for one display panel and all other panels using that controller are configured using the Device Tree 'init' property. This property is supported by all fbtft drivers and provides a generic way to set register values or issue commands (depending on the type of controller).
It is common for these types of displays to have a datasheet listing the necessary controller settings/commands or some example code doing the same.
This is how the panel directly supported by the fb_st7735r staging driver is described using Device Tree with that driver:
width = <160>; height = <128>;
init = <0x1000001 0x2000096 0x1000011 0x20000ff 0x10000B1 0x01 0x2C 0x2D 0x10000B4 0x07 0x10000C0 0xA2 0x02 0x84 0x10000C1 0xC5 0x10000C2 0x0A 0x00 0x10000C5 0x0E 0x100003a 0x55 0x1000036 0x60 0x10000E0 0x0F 0x1A 0x0F 0x18 0x2F 0x28 0x20 0x22 0x1F 0x1B 0x23 0x37 0x00 0x07 0x02 0x10 0x10000E1 0x0F 0x1B 0x0F 0x17 0x33 0x2C 0x29 0x2E 0x30 0x30 0x39 0x3F 0x00 0x07 0x03 0x10 0x1000029 0x2000064>;
This is how the same panel is described using the st7735r drm driver and this patchset:
width = <160>; height = <128>;
frmctr1 = [ 01 2C 2D ]; invctr = [ 07 ]; pwctr1 = [ A2 02 84 ]; pwctr2 = [ C5 ]; pwctr3 = [ 0A 00 ]; vmctr1 = [ 0E ]; madctl = [ 60 ]; gamctrp1 = [ 0F 1A 0F 18 2F 28 20 22 1F 1B 23 37 00 07 02 10 ]; gamctrn1 = [ 0F 1B 0F 17 33 2C 29 2E 30 30 39 3F 00 07 03 10 ];
Back when the fbtft drivers were added to staging I asked on the DT mailinglist if it was OK to use the 'init' property but it was turned down. In this patchset I'm trying the same approach used by the solomon,ssd1307fb.yaml binding in describing the attached panel. That binding prefixes the properties with the vendor name, not sure why that is and I think it looks strange so I try without it.
Noralf.
Noralf Trønnes (6): dt-bindings: display: sitronix,st7735r: Fix backlight in example dt-bindings: display: sitronix,st7735r: Make reset-gpios optional dt-bindings: display: sitronix,st7735r: Remove spi-max-frequency limit dt-bindings: display: sitronix,st7735r: Add initialization properties drm/mipi-dbi: Add device property functions drm: tiny: st7735r: Support DT initialization of controller
.../bindings/display/sitronix,st7735r.yaml | 122 ++++++++++++++- drivers/gpu/drm/drm_mipi_dbi.c | 139 ++++++++++++++++++ drivers/gpu/drm/tiny/st7735r.c | 87 +++++++++-- include/drm/drm_mipi_dbi.h | 3 + 4 files changed, 334 insertions(+), 17 deletions(-)