Use the correct device to request the DMA mapping. Otherwise the IOMMU doesn't get the mapping and it will generate a page fault.
The error messages look like: [ 3.008452] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0xf9800000, fsynr=0x3f0022, cbfrsynra=0x828, cb=8 [ 3.020123] arm-smmu 5000000.iommu: Unhandled context fault: fsr=0x402, iova=0xf9800000, fsynr=0x3f0022, cbfrsynra=0x828, cb=8
This was tested on a custom board with a LS1028A SoC.
Signed-off-by: Michael Walle michael@walle.cc --- drivers/spi/spi-fsl-dspi.c | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-)
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index cf8a141bbaf2..ad63804ef690 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -510,14 +510,16 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr) goto err_tx_channel; }
- dma->tx_dma_buf = dma_alloc_coherent(dev, dspi->devtype_data->dma_bufsize, + dma->tx_dma_buf = dma_alloc_coherent(dma->chan_tx->device->dev, + dspi->devtype_data->dma_bufsize, &dma->tx_dma_phys, GFP_KERNEL); if (!dma->tx_dma_buf) { ret = -ENOMEM; goto err_tx_dma_buf; }
- dma->rx_dma_buf = dma_alloc_coherent(dev, dspi->devtype_data->dma_bufsize, + dma->rx_dma_buf = dma_alloc_coherent(dma->chan_rx->device->dev, + dspi->devtype_data->dma_bufsize, &dma->rx_dma_phys, GFP_KERNEL); if (!dma->rx_dma_buf) { ret = -ENOMEM; @@ -554,10 +556,12 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr) return 0;
err_slave_config: - dma_free_coherent(dev, dspi->devtype_data->dma_bufsize, + dma_free_coherent(dma->chan_rx->device->dev, + dspi->devtype_data->dma_bufsize, dma->rx_dma_buf, dma->rx_dma_phys); err_rx_dma_buf: - dma_free_coherent(dev, dspi->devtype_data->dma_bufsize, + dma_free_coherent(dma->chan_tx->device->dev, + dspi->devtype_data->dma_bufsize, dma->tx_dma_buf, dma->tx_dma_phys); err_tx_dma_buf: dma_release_channel(dma->chan_tx); @@ -573,20 +577,19 @@ static int dspi_request_dma(struct fsl_dspi *dspi, phys_addr_t phy_addr) static void dspi_release_dma(struct fsl_dspi *dspi) { struct fsl_dspi_dma *dma = dspi->dma; - struct device *dev = &dspi->pdev->dev;
if (!dma) return;
if (dma->chan_tx) { - dma_unmap_single(dev, dma->tx_dma_phys, + dma_unmap_single(dma->chan_tx->device->dev, dma->tx_dma_phys, dspi->devtype_data->dma_bufsize, DMA_TO_DEVICE); dma_release_channel(dma->chan_tx); }
if (dma->chan_rx) { - dma_unmap_single(dev, dma->rx_dma_phys, + dma_unmap_single(dma->chan_rx->device->dev, dma->rx_dma_phys, dspi->devtype_data->dma_bufsize, DMA_FROM_DEVICE); dma_release_channel(dma->chan_rx);