On Thu, Jul 17, 2014 at 06:01:24PM +0900, YoungJun Cho wrote:
This patch adds DT bindings for s6e3fa0 panel. The bindings describes panel resources and display timings.
The commit message here should preferably say which platform this is used on.
Signed-off-by: YoungJun Cho yj44.cho@samsung.com Acked-by: Inki Dae inki.dae@samsung.com Acked-by: Kyungmin Park kyungmin.park@samsung.com
.../devicetree/bindings/panel/samsung,s6e3fa0.txt | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt
diff --git a/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt b/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt new file mode 100644 index 0000000..2cd32f5 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt @@ -0,0 +1,46 @@ +Samsung S6E3FA0 AMOLED LCD 5.7 inch panel
+Required properties:
- compatible: "samsung,s6e3fa0"
- reg: the virtual channel number of a DSI peripheral
- vdd3-supply: core voltage supply
- vci-supply: voltage supply for analog circuits
- reset-gpios: a GPIO spec for the reset pin
- det-gpios: a GPIO spec for the OLED detection pin
- te-gpios: a GPIO spec for the TE pin
- display-timings: timings for the connected panel as described by [1]
display-timings should be optional. The panel driver should provide a default mode. And only if you really need to override the default mode you should provide the option of getting an alternative set of values from DT.
Thierry