From: Ville Syrjälä ville.syrjala@linux.intel.com
Currently we're adding CEA modes after the inferred modes, which means we might get multiple modes that are very close to each other, but slightly different, which seems a bit silly. That's because duplicate mode check that occurs when adding inferred modes would not consider CEA modes as potential duplicates. Reverse the order so that CEA modes get added before inferred modes, and are thus considered potential duplicates.
Or as ajax put it on irc: "< ajax> the point of the "pick a timing formula" heuristic was to generate something the sink could _likely_ sink. if it tells us timings it can sink explicitly then second-guessing seems dumb."
Cc: Adam Jackson ajax@redhat.com Signed-off-by: Ville Syrjälä ville.syrjala@linux.intel.com --- drivers/gpu/drm/drm_edid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index e7a1400..314a364 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -3744,10 +3744,10 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid) num_modes += add_cvt_modes(connector, edid); num_modes += add_standard_modes(connector, edid); num_modes += add_established_modes(connector, edid); - if (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF) - num_modes += add_inferred_modes(connector, edid); num_modes += add_cea_modes(connector, edid); num_modes += add_alternate_cea_modes(connector, edid); + if (edid->features & DRM_EDID_FEATURE_DEFAULT_GTF) + num_modes += add_inferred_modes(connector, edid);
if (quirks & (EDID_QUIRK_PREFER_LARGE_60 | EDID_QUIRK_PREFER_LARGE_75)) edid_fixup_preferred(connector, quirks);