On 05/10/2020 13:38:30-0500, Rob Herring wrote:
In order to add meta-schema checks for additional/unevaluatedProperties being present, all schema need to make this explicit. As common/shared schema are included by other schemas, they should always allow for additionalProperties.
Signed-off-by: Rob Herring robh@kernel.org
Acked-by: Alexandre Belloni alexandre.belloni@bootlin.com
Documentation/devicetree/bindings/arm/cpus.yaml | 2 ++ .../devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml | 2 ++ Documentation/devicetree/bindings/ata/pata-common.yaml | 2 ++ Documentation/devicetree/bindings/ata/sata-common.yaml | 2 ++ Documentation/devicetree/bindings/bus/simple-pm-bus.yaml | 2 ++ .../devicetree/bindings/chrome/google,cros-ec-typec.yaml | 2 ++ .../devicetree/bindings/connector/usb-connector.yaml | 2 ++ .../devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml | 2 ++ .../devicetree/bindings/display/dsi-controller.yaml | 2 ++ Documentation/devicetree/bindings/display/panel/lvds.yaml | 2 ++ .../devicetree/bindings/display/panel/panel-common.yaml | 2 ++ Documentation/devicetree/bindings/dma/dma-common.yaml | 2 ++ Documentation/devicetree/bindings/dma/dma-controller.yaml | 2 ++ Documentation/devicetree/bindings/dma/dma-router.yaml | 2 ++ Documentation/devicetree/bindings/extcon/wlf,arizona.yaml | 2 ++ .../devicetree/bindings/iio/adc/samsung,exynos-adc.yaml | 5 ++++- Documentation/devicetree/bindings/iio/common.yaml | 2 ++ Documentation/devicetree/bindings/input/input.yaml | 2 ++ Documentation/devicetree/bindings/input/matrix-keymap.yaml | 2 ++ .../devicetree/bindings/input/touchscreen/touchscreen.yaml | 2 ++ Documentation/devicetree/bindings/leds/common.yaml | 2 ++ .../devicetree/bindings/leds/leds-class-multicolor.yaml | 3 +++ Documentation/devicetree/bindings/leds/trigger-source.yaml | 2 ++ Documentation/devicetree/bindings/media/rc.yaml | 2 ++ Documentation/devicetree/bindings/mfd/syscon.yaml | 2 +- Documentation/devicetree/bindings/mmc/mmc-controller.yaml | 2 ++ .../devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml | 2 ++ Documentation/devicetree/bindings/mtd/nand-controller.yaml | 2 ++ .../devicetree/bindings/net/can/can-transceiver.yaml | 2 ++ Documentation/devicetree/bindings/net/dsa/dsa.yaml | 2 ++ .../devicetree/bindings/net/ethernet-controller.yaml | 2 ++ Documentation/devicetree/bindings/net/ethernet-phy.yaml | 2 ++ Documentation/devicetree/bindings/net/mdio.yaml | 2 ++ Documentation/devicetree/bindings/net/snps,dwmac.yaml | 2 ++ Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml | 2 ++ Documentation/devicetree/bindings/nvmem/nvmem.yaml | 2 ++ Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml | 2 ++ Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml | 2 ++ Documentation/devicetree/bindings/pci/cdns-pcie.yaml | 2 ++ Documentation/devicetree/bindings/pci/pci-ep.yaml | 2 ++ Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml | 2 ++ Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml | 2 ++ Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml | 2 ++ Documentation/devicetree/bindings/power/power-domain.yaml | 2 ++ .../devicetree/bindings/power/supply/power-supply.yaml | 2 ++ Documentation/devicetree/bindings/pwm/pwm.yaml | 2 ++ Documentation/devicetree/bindings/regulator/regulator.yaml | 2 ++ Documentation/devicetree/bindings/regulator/wlf,arizona.yaml | 2 ++ Documentation/devicetree/bindings/riscv/cpus.yaml | 2 ++ Documentation/devicetree/bindings/rtc/rtc.yaml | 2 ++ Documentation/devicetree/bindings/serial/rs485.yaml | 3 +++ Documentation/devicetree/bindings/serial/serial.yaml | 2 ++ Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml | 2 ++ Documentation/devicetree/bindings/sound/amlogic,aiu.yaml | 2 ++ Documentation/devicetree/bindings/sound/cirrus,madera.yaml | 2 ++ .../devicetree/bindings/sound/nvidia,tegra210-ahub.yaml | 3 +++ Documentation/devicetree/bindings/sound/wlf,arizona.yaml | 2 ++ .../devicetree/bindings/soundwire/soundwire-controller.yaml | 2 ++ Documentation/devicetree/bindings/spi/spi-controller.yaml | 2 ++ Documentation/devicetree/bindings/spmi/spmi.yaml | 2 ++ .../devicetree/bindings/thermal/thermal-cooling-devices.yaml | 2 ++ .../devicetree/bindings/thermal/thermal-sensor.yaml | 2 ++ Documentation/devicetree/bindings/usb/ti,tps6598x.yaml | 2 ++ Documentation/devicetree/bindings/usb/usb-hcd.yaml | 2 ++ Documentation/devicetree/bindings/watchdog/watchdog.yaml | 2 ++ 65 files changed, 134 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml index 1222bf1831fa..14cd727d3c4b 100644 --- a/Documentation/devicetree/bindings/arm/cpus.yaml +++ b/Documentation/devicetree/bindings/arm/cpus.yaml @@ -341,6 +341,8 @@ required: dependencies: rockchip,pmu: [enable-method]
+additionalProperties: true
examples:
- | cpus {
diff --git a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml index 1043e4be4fca..c9675c4cdc1b 100644 --- a/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml +++ b/Documentation/devicetree/bindings/arm/nvidia,tegra194-ccplex.yaml @@ -30,6 +30,8 @@ properties: Specifies the bpmp node that needs to be queried to get operating point data for all CPUs.
+additionalProperties: true
examples:
- | cpus {
diff --git a/Documentation/devicetree/bindings/ata/pata-common.yaml b/Documentation/devicetree/bindings/ata/pata-common.yaml index fc5ebbe7108d..2412894a255d 100644 --- a/Documentation/devicetree/bindings/ata/pata-common.yaml +++ b/Documentation/devicetree/bindings/ata/pata-common.yaml @@ -47,4 +47,6 @@ patternProperties: The ID number of the drive port, 0 for the master port and 1 for the slave port.
+additionalProperties: true
... diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml index 6783a4dec6b5..7ac77b1c5850 100644 --- a/Documentation/devicetree/bindings/ata/sata-common.yaml +++ b/Documentation/devicetree/bindings/ata/sata-common.yaml @@ -47,4 +47,6 @@ patternProperties: multiplier making it possible to connect up to 15 disks to a single SATA port.
+additionalProperties: true
... diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml index 33326ffdb266..182134d7a6a3 100644 --- a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml +++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml @@ -61,6 +61,8 @@ anyOf:
- required:
- power-domains
+additionalProperties: true
examples:
- | #include <dt-bindings/clock/qcom,gcc-msm8996.h>
diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml index 6d7396ab8bee..2d98f7c4d3bc 100644 --- a/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml +++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-typec.yaml @@ -26,6 +26,8 @@ properties: required:
- compatible
+additionalProperties: true #fixme
examples:
- |+ spi0 {
diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml index dc6ff64422d4..f037d65b018e 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml @@ -172,6 +172,8 @@ allOf: type: const: micro
+additionalProperties: true
examples: # Micro-USB connector with HS lines routed via controller (MUIC).
- |
diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml index 012aa8e7cb8c..e42cb610f545 100644 --- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml @@ -66,3 +66,5 @@ required:
- clocks
- ports
- reg
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/dsi-controller.yaml b/Documentation/devicetree/bindings/display/dsi-controller.yaml index a02039e3aca0..ca21671f6bdd 100644 --- a/Documentation/devicetree/bindings/display/dsi-controller.yaml +++ b/Documentation/devicetree/bindings/display/dsi-controller.yaml @@ -73,6 +73,8 @@ patternProperties: required: - reg
+additionalProperties: true
examples:
- | #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml index 946dd354256c..31164608ba1d 100644 --- a/Documentation/devicetree/bindings/display/panel/lvds.yaml +++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml @@ -112,4 +112,6 @@ oneOf:
- required:
- ports
+additionalProperties: true
... diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml index 45fe8fe5faba..cd6dc5461721 100644 --- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml +++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml @@ -163,4 +163,6 @@ dependencies: width-mm: [ height-mm ] height-mm: [ width-mm ]
+additionalProperties: true
... diff --git a/Documentation/devicetree/bindings/dma/dma-common.yaml b/Documentation/devicetree/bindings/dma/dma-common.yaml index c36592683340..307b499e8968 100644 --- a/Documentation/devicetree/bindings/dma/dma-common.yaml +++ b/Documentation/devicetree/bindings/dma/dma-common.yaml @@ -49,3 +49,5 @@ properties:
required:
- "#dma-cells"
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/dma/dma-controller.yaml b/Documentation/devicetree/bindings/dma/dma-controller.yaml index c39f6de76670..0043b91da95e 100644 --- a/Documentation/devicetree/bindings/dma/dma-controller.yaml +++ b/Documentation/devicetree/bindings/dma/dma-controller.yaml @@ -17,6 +17,8 @@ properties: $nodename: pattern: "^dma-controller(@.*)?$"
+additionalProperties: true
examples:
- | dma: dma-controller@48000000 {
diff --git a/Documentation/devicetree/bindings/dma/dma-router.yaml b/Documentation/devicetree/bindings/dma/dma-router.yaml index 5b5f07393135..4cee5667b8a8 100644 --- a/Documentation/devicetree/bindings/dma/dma-router.yaml +++ b/Documentation/devicetree/bindings/dma/dma-router.yaml @@ -36,6 +36,8 @@ required:
- "#dma-cells"
- dma-masters
+additionalProperties: true
examples:
- | sdma_xbar: dma-router@4a002b78 {
diff --git a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml index f9845dc2f5ae..5fe784f487c5 100644 --- a/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/extcon/wlf,arizona.yaml @@ -123,3 +123,5 @@ properties: $ref: "/schemas/types.yaml#/definitions/uint32" minimum: 0 maximum: 3
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml index 16d76482b4ff..cfb66ba45ee8 100644 --- a/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml +++ b/Documentation/devicetree/bindings/iio/adc/samsung,exynos-adc.yaml @@ -46,6 +46,8 @@ properties: "#io-channel-cells": const: 1
io-channel-ranges: true
vdd-supply: true
samsung,syscon-phandle:
@@ -107,7 +109,8 @@ allOf: items: - const: adc
-additionalProperties: false +additionalProperties:
- type: object
examples:
- |
diff --git a/Documentation/devicetree/bindings/iio/common.yaml b/Documentation/devicetree/bindings/iio/common.yaml index 97ffcb77043d..f845b41d74c4 100644 --- a/Documentation/devicetree/bindings/iio/common.yaml +++ b/Documentation/devicetree/bindings/iio/common.yaml @@ -32,4 +32,6 @@ properties: considered 'near' to the device (an object is near to the sensor).
+additionalProperties: true
... diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index 8edcb3c31270..ab407f266bef 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -33,3 +33,5 @@ properties: power off automatically. Device with key pressed shutdown feature can specify this property. $ref: /schemas/types.yaml#/definitions/uint32
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/input/matrix-keymap.yaml b/Documentation/devicetree/bindings/input/matrix-keymap.yaml index c3bf09156783..6699d5e32dca 100644 --- a/Documentation/devicetree/bindings/input/matrix-keymap.yaml +++ b/Documentation/devicetree/bindings/input/matrix-keymap.yaml @@ -35,6 +35,8 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: Number of column lines connected to the keypad controller.
+additionalProperties: true
examples:
- | keypad {
diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml index 36dc7b56a453..a771a15f053f 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml @@ -81,3 +81,5 @@ dependencies: touchscreen-size-y: [ touchscreen-size-x ] touchscreen-x-mm: [ touchscreen-y-mm ] touchscreen-y-mm: [ touchscreen-x-mm ]
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index a2a541bca73c..08b6700ca61e 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -156,6 +156,8 @@ properties: Maximum timeout in microseconds after which the flash LED is turned off. Required for flash LED nodes with configurable timeout.
+additionalProperties: true
examples:
- | #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml index b55e1f1308a4..b1a53f054b89 100644 --- a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml +++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml @@ -34,4 +34,7 @@ patternProperties:
required: - color
+additionalProperties: true
... diff --git a/Documentation/devicetree/bindings/leds/trigger-source.yaml b/Documentation/devicetree/bindings/leds/trigger-source.yaml index 0618003e40bd..89a1cde2b8aa 100644 --- a/Documentation/devicetree/bindings/leds/trigger-source.yaml +++ b/Documentation/devicetree/bindings/leds/trigger-source.yaml @@ -21,4 +21,6 @@ properties: trigger sources (e.g. a specific USB port). enum: [ 0, 1 ]
+additionalProperties: true
... diff --git a/Documentation/devicetree/bindings/media/rc.yaml b/Documentation/devicetree/bindings/media/rc.yaml index ded2ac43237d..8ad2cba5f61f 100644 --- a/Documentation/devicetree/bindings/media/rc.yaml +++ b/Documentation/devicetree/bindings/media/rc.yaml @@ -150,3 +150,5 @@ properties: - rc-x96max - rc-xbox-dvd - rc-zx-irdec
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml index 844ee2a6ce05..5317a7d69aa5 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.yaml +++ b/Documentation/devicetree/bindings/mfd/syscon.yaml @@ -71,7 +71,7 @@ required:
- compatible
- reg
-unevaluatedProperties: false +additionalProperties: true
examples:
- |
diff --git a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml index b96da0c7f819..57319b425eaa 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-controller.yaml +++ b/Documentation/devicetree/bindings/mmc/mmc-controller.yaml @@ -349,6 +349,8 @@ dependencies: cd-debounce-delay-ms: [ cd-gpios ] fixed-emmc-driver-type: [ non-removable ]
+additionalProperties: true
examples:
- | mmc@ab000000 {
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml index 85bd528e9a14..8dfad89c78a7 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml @@ -62,3 +62,5 @@ properties:
dma-names: const: rx-tx
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml index 40fc5b0b2b8c..274bbe6a365e 100644 --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml @@ -128,6 +128,8 @@ required:
- "#address-cells"
- "#size-cells"
+additionalProperties: true
examples:
- | nand-controller {
diff --git a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml index 6396977d29e5..d1ef1fe6ab29 100644 --- a/Documentation/devicetree/bindings/net/can/can-transceiver.yaml +++ b/Documentation/devicetree/bindings/net/can/can-transceiver.yaml @@ -16,3 +16,5 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32 description: a positive non 0 value that determines the max speed that CAN/CAN-FD can run. minimum: 1
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.yaml b/Documentation/devicetree/bindings/net/dsa/dsa.yaml index 6a1ec50ad4fd..a765ceba28c6 100644 --- a/Documentation/devicetree/bindings/net/dsa/dsa.yaml +++ b/Documentation/devicetree/bindings/net/dsa/dsa.yaml @@ -89,4 +89,6 @@ oneOf:
- required:
- ethernet-ports
+additionalProperties: true
... diff --git a/Documentation/devicetree/bindings/net/ethernet-controller.yaml b/Documentation/devicetree/bindings/net/ethernet-controller.yaml index fa2baca8c726..3fd85ce37e9c 100644 --- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml @@ -205,4 +205,6 @@ properties: required: - speed
+additionalProperties: true
... diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index a9e547ac7905..6dd72faebd89 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -177,6 +177,8 @@ properties: required:
- reg
+additionalProperties: true
examples:
- | ethernet {
diff --git a/Documentation/devicetree/bindings/net/mdio.yaml b/Documentation/devicetree/bindings/net/mdio.yaml index 26afb556dfae..e811e0fd851c 100644 --- a/Documentation/devicetree/bindings/net/mdio.yaml +++ b/Documentation/devicetree/bindings/net/mdio.yaml @@ -100,6 +100,8 @@ patternProperties: required: - reg
+additionalProperties: true
examples:
- | davinci_mdio: mdio@5c030000 {
diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 30a1efd26626..11a6fdb657c9 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -356,6 +356,8 @@ allOf: Enables the TSO feature otherwise it will be managed by MAC HW capability register.
+additionalProperties: true
examples:
- | stmmac_axi_setup: stmmac-axi-config {
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml index b7c00ed31085..d5d7f113bade 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml @@ -36,6 +36,8 @@ dependencies: nvmem-names: [ nvmem ] nvmem-cell-names: [ nvmem-cells ]
+additionalProperties: true
examples:
- | tsens {
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.yaml b/Documentation/devicetree/bindings/nvmem/nvmem.yaml index b459f9dba6c9..7481a9e48f19 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.yaml +++ b/Documentation/devicetree/bindings/nvmem/nvmem.yaml @@ -67,6 +67,8 @@ patternProperties: required: - reg
+additionalProperties: true
examples:
- | #include <dt-bindings/gpio/gpio.h>
diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml index 016a5f61592d..60b8baf299bb 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-ep.yaml @@ -22,3 +22,5 @@ properties:
required:
- cdns,max-outbound-regions
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml index 303078a7b7a8..a944f9bfffff 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie-host.yaml @@ -33,3 +33,5 @@ properties: deprecated: true
msi-parent: true
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml index 02553d5e6c51..df4fe28222b0 100644 --- a/Documentation/devicetree/bindings/pci/cdns-pcie.yaml +++ b/Documentation/devicetree/bindings/pci/cdns-pcie.yaml @@ -21,3 +21,5 @@ properties: items: - const: pcie-phy # FIXME: names when more than 1
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml index 0f8e575ac01a..7847bbcd4a03 100644 --- a/Documentation/devicetree/bindings/pci/pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml @@ -36,3 +36,5 @@ properties:
required:
- compatible
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml index 6bfc25d0e1b3..4cb174bf31ff 100644 --- a/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/pinctrl/cirrus,madera.yaml @@ -120,3 +120,5 @@ properties: required:
- pinctrl-0
- pinctrl-names
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml index 13b7ab9dd6d5..71ed0a9def84 100644 --- a/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml @@ -138,3 +138,5 @@ properties: and the delay before latching a value to an output pin. Typically indicates how many double-inverters are used to delay the signal.
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml index ef8877ddb1eb..551df3d9b809 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinmux-node.yaml @@ -129,3 +129,5 @@ properties:
pinctrl-pin-array: $ref: /schemas/types.yaml#/definitions/uint32-array
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml index dd564349aa53..aed51e9dcb11 100644 --- a/Documentation/devicetree/bindings/power/power-domain.yaml +++ b/Documentation/devicetree/bindings/power/power-domain.yaml @@ -69,6 +69,8 @@ properties: required:
- "#power-domain-cells"
+additionalProperties: true
examples:
- | power: power-controller@12340000 {
diff --git a/Documentation/devicetree/bindings/power/supply/power-supply.yaml b/Documentation/devicetree/bindings/power/supply/power-supply.yaml index 3bb02bb3a2d8..c5c55f627251 100644 --- a/Documentation/devicetree/bindings/power/supply/power-supply.yaml +++ b/Documentation/devicetree/bindings/power/supply/power-supply.yaml @@ -16,6 +16,8 @@ properties: This property is added to a supply in order to list the devices which supply it power, referenced by their phandles.
+additionalProperties: true
examples:
- | power {
diff --git a/Documentation/devicetree/bindings/pwm/pwm.yaml b/Documentation/devicetree/bindings/pwm/pwm.yaml index fa4f9de92090..7d1f687cee9c 100644 --- a/Documentation/devicetree/bindings/pwm/pwm.yaml +++ b/Documentation/devicetree/bindings/pwm/pwm.yaml @@ -20,6 +20,8 @@ properties: required:
- "#pwm-cells"
+additionalProperties: true
examples:
- | pwm: pwm@7000a000 {
diff --git a/Documentation/devicetree/bindings/regulator/regulator.yaml b/Documentation/devicetree/bindings/regulator/regulator.yaml index ec505dbbf87c..6d0bc9cd4040 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.yaml +++ b/Documentation/devicetree/bindings/regulator/regulator.yaml @@ -188,6 +188,8 @@ patternProperties:
additionalProperties: false+additionalProperties: true
examples:
- | xyzreg: regulator {
diff --git a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml index a0aea73bf412..7b4ae5d23351 100644 --- a/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/regulator/wlf,arizona.yaml @@ -35,3 +35,5 @@ properties: Initial data for the MICVDD regulator. $ref: "regulator.yaml#" type: object
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index f80ba2c66f71..c6925e0b16e4 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -91,6 +91,8 @@ required:
- riscv,isa
- interrupt-controller
+additionalProperties: true
examples:
- | // Example 1: SiFive Freedom U540G Development Kit
diff --git a/Documentation/devicetree/bindings/rtc/rtc.yaml b/Documentation/devicetree/bindings/rtc/rtc.yaml index ee237b2ed66a..2d055e37e6f7 100644 --- a/Documentation/devicetree/bindings/rtc/rtc.yaml +++ b/Documentation/devicetree/bindings/rtc/rtc.yaml @@ -47,4 +47,6 @@ properties: description: Enables wake up of host system on alarm.
+additionalProperties: true
... diff --git a/Documentation/devicetree/bindings/serial/rs485.yaml b/Documentation/devicetree/bindings/serial/rs485.yaml index fe90569475e1..0c9fa694f85c 100644 --- a/Documentation/devicetree/bindings/serial/rs485.yaml +++ b/Documentation/devicetree/bindings/serial/rs485.yaml @@ -45,4 +45,7 @@ properties: rs485-term-gpios: description: GPIO pin to enable RS485 bus termination. maxItems: 1
+additionalProperties: true
... diff --git a/Documentation/devicetree/bindings/serial/serial.yaml b/Documentation/devicetree/bindings/serial/serial.yaml index 8645d0e526b4..65e75d040521 100644 --- a/Documentation/devicetree/bindings/serial/serial.yaml +++ b/Documentation/devicetree/bindings/serial/serial.yaml @@ -124,6 +124,8 @@ patternProperties: required: - compatible
+additionalProperties: true
examples:
- | serial@1234 {
diff --git a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml index 3cbf2d28a188..80d99861fec5 100644 --- a/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml +++ b/Documentation/devicetree/bindings/soc/imx/fsl,aips-bus.yaml @@ -35,6 +35,8 @@ required:
- compatible
- reg
+additionalProperties: true
examples:
- | bus@30000000 {
diff --git a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml index 7a7f28469624..f50558ed914f 100644 --- a/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml +++ b/Documentation/devicetree/bindings/sound/amlogic,aiu.yaml @@ -75,6 +75,8 @@ required:
- reg
- resets
+additionalProperties: false
examples:
- | #include <dt-bindings/clock/gxbb-clkc.h>
diff --git a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml index c4cd58b5acd4..23138ddcb62d 100644 --- a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml +++ b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml @@ -111,3 +111,5 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 2 maxItems: 2
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml index 44ee9d844ae0..d77219727768 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml @@ -67,6 +67,9 @@ required:
- "#size-cells"
- ranges
+additionalProperties:
- type: object
examples:
- | #include<dt-bindings/clock/tegra210-car.h>
diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml index 22d54be7900a..1627c0bb69be 100644 --- a/Documentation/devicetree/bindings/sound/wlf,arizona.yaml +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.yaml @@ -112,3 +112,5 @@ properties: $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 12
+additionalProperties: true diff --git a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml index 330924b8618e..4aad121eff3f 100644 --- a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml +++ b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml @@ -57,6 +57,8 @@ required:
- "#address-cells"
- "#size-cells"
+additionalProperties: true
examples:
- | soundwire@c2d0000 {
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index c6a2f543648b..2b154803b181 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -140,6 +140,8 @@ patternProperties: - compatible - reg
+additionalProperties: true
examples:
- | spi@f00 {
diff --git a/Documentation/devicetree/bindings/spmi/spmi.yaml b/Documentation/devicetree/bindings/spmi/spmi.yaml index 0cfbf56ba825..173940930719 100644 --- a/Documentation/devicetree/bindings/spmi/spmi.yaml +++ b/Documentation/devicetree/bindings/spmi/spmi.yaml @@ -55,6 +55,8 @@ patternProperties: required:
- reg
+additionalProperties: true
examples:
- | #include <dt-bindings/spmi/spmi.h>
diff --git a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml index ad4beaf02842..f004779ba9b3 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml @@ -49,6 +49,8 @@ properties: and the second cell is the maximum cooling state requested. const: 2
+additionalProperties: true
examples:
- | #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml index 727d04550324..9f747921e851 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml @@ -36,6 +36,8 @@ properties: containing several internal sensors. enum: [0, 1]
+additionalProperties: true
examples:
- | #include <dt-bindings/interrupt-controller/arm-gic.h>
diff --git a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml index 8eaf4b6c4735..f6819bf2a3b5 100644 --- a/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml +++ b/Documentation/devicetree/bindings/usb/ti,tps6598x.yaml @@ -32,6 +32,8 @@ required:
- interrupts
- interrupt-names
+additionalProperties: true
examples:
- | #include <dt-bindings/interrupt-controller/irq.h>
diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml index 7263b7f2b510..b545b087b342 100644 --- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml +++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml @@ -22,6 +22,8 @@ properties: description: Name specifier for the USB PHY
+additionalProperties: true
examples:
- | usb {
diff --git a/Documentation/devicetree/bindings/watchdog/watchdog.yaml b/Documentation/devicetree/bindings/watchdog/watchdog.yaml index 187bf6cb62bf..4e2c26cd981d 100644 --- a/Documentation/devicetree/bindings/watchdog/watchdog.yaml +++ b/Documentation/devicetree/bindings/watchdog/watchdog.yaml @@ -23,4 +23,6 @@ properties: description: Contains the watchdog timeout in seconds.
+additionalProperties: true
...
2.25.1