Am Freitag, den 28.02.2014, 14:20 +0200 schrieb Tomi Valkeinen:
Add DT binding documentation for TFP410 encoder
Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com Reviewed-by: Archit Taneja archit@ti.com
.../devicetree/bindings/video/ti,tfp410.txt | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/ti,tfp410.txt
diff --git a/Documentation/devicetree/bindings/video/ti,tfp410.txt b/Documentation/devicetree/bindings/video/ti,tfp410.txt new file mode 100644 index 000000000000..6a5a04627584 --- /dev/null +++ b/Documentation/devicetree/bindings/video/ti,tfp410.txt @@ -0,0 +1,41 @@ +TFP410 DPI to DVI encoder +=========================
+Required properties: +- compatible: "ti,tfp410"
+Optional properties: +- gpios: power-down gpio
Maybe call this powerdown-gpios?
+Required nodes: +- Video port 0 for DPI input +- Video port 1 for DVI output
+Example +-------
+tfp410: encoder@0 {
- compatible = "ti,tfp410";
- gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>;
- ports {
#address-cells = <1>;#size-cells = <0>;port@0 {reg = <0>;tfp410_in: endpoint@0 {remote-endpoint = <&dpi_out>;};};port@1 {reg = <1>;tfp410_out: endpoint@0 {remote-endpoint = <&dvi_connector_in>;};};- };
+};
regards Philipp