From: Peter Ujfalusi peter.ujfalusi@ti.com
The sync in some panels needs to be driven by different edge of the pixel clock compared to data. This is reflected by the DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in videmode flags. Add similar similar definitions for bus_flags and convert the sync drive edge via drm_bus_flags_from_videomode().
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com Signed-off-by: Tomi Valkeinen tomi.valkeinen@ti.com Signed-off-by: Jyri Sarha jsarha@ti.com --- drivers/gpu/drm/drm_modes.c | 15 +++++++++++---- include/drm/drm_connector.h | 4 ++++ 2 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c index e82b61e08f8c..1661bfc55687 100644 --- a/drivers/gpu/drm/drm_modes.c +++ b/drivers/gpu/drm/drm_modes.c @@ -659,10 +659,12 @@ EXPORT_SYMBOL_GPL(drm_display_mode_to_videomode); * drm_bus_flags_from_videomode - extract information about pixelclk and * DE polarity from videomode and store it in a separate variable * @vm: videomode structure to use - * @bus_flags: information about pixelclk and DE polarity will be stored here + * @bus_flags: information about pixelclk, sync and DE polarity will be stored + * here * - * Sets DRM_BUS_FLAG_DE_(LOW|HIGH) and DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE - * in @bus_flags according to DISPLAY_FLAGS found in @vm + * Sets DRM_BUS_FLAG_DE_(LOW|HIGH), DRM_BUS_FLAG_PIXDATA_(POS|NEG)EDGE and + * DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE in @bus_flags according to DISPLAY_FLAGS + * found in @vm */ void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags) { @@ -672,6 +674,11 @@ void drm_bus_flags_from_videomode(const struct videomode *vm, u32 *bus_flags) if (vm->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE) *bus_flags |= DRM_BUS_FLAG_PIXDATA_NEGEDGE;
+ if (vm->flags & DISPLAY_FLAGS_SYNC_POSEDGE) + *bus_flags |= DRM_BUS_FLAG_SYNC_POSEDGE; + if (vm->flags & DISPLAY_FLAGS_SYNC_NEGEDGE) + *bus_flags |= DRM_BUS_FLAG_SYNC_NEGEDGE; + if (vm->flags & DISPLAY_FLAGS_DE_LOW) *bus_flags |= DRM_BUS_FLAG_DE_LOW; if (vm->flags & DISPLAY_FLAGS_DE_HIGH) @@ -684,7 +691,7 @@ EXPORT_SYMBOL_GPL(drm_bus_flags_from_videomode); * of_get_drm_display_mode - get a drm_display_mode from devicetree * @np: device_node with the timing specification * @dmode: will be set to the return value - * @bus_flags: information about pixelclk and DE polarity + * @bus_flags: information about pixelclk, sync and DE polarity * @index: index into the list of display timings in devicetree * * This function is expensive and should only be used, if only one mode is to be diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 675cc3f8cf85..8fa901637f00 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -290,6 +290,10 @@ struct drm_display_info { #define DRM_BUS_FLAG_DATA_MSB_TO_LSB (1<<4) /* data is transmitted LSB to MSB on the bus */ #define DRM_BUS_FLAG_DATA_LSB_TO_MSB (1<<5) +/* drive sync on pos. edge */ +#define DRM_BUS_FLAG_SYNC_POSEDGE (1<<6) +/* drive sync on neg. edge */ +#define DRM_BUS_FLAG_SYNC_NEGEDGE (1<<7)
/** * @bus_flags: Additional information (like pixel signal polarity) for