Hi,
On Thu, Oct 03, 2019 at 10:28:11AM +0200, Jean-Jacques Hiblot wrote:
Add DT binding for led-backlight.
Signed-off-by: Jean-Jacques Hiblot jjhiblot@ti.com Reviewed-by: Daniel Thompson daniel.thompson@linaro.org
Reviewed-by: Sebastian Reichel sebastian.reichel@collabora.com
-- Sebastian
.../bindings/leds/backlight/led-backlight.txt | 28 +++++++++++++++++++ 1 file changed, 28 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/backlight/led-backlight.txt
diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt new file mode 100644 index 000000000000..4c7dfbe7f67a --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.txt @@ -0,0 +1,28 @@ +led-backlight bindings
+This binding is used to describe a basic backlight device made of LEDs. +It can also be used to describe a backlight device controlled by the output of +a LED driver.
+Required properties:
- compatible: "led-backlight"
- leds: a list of LEDs
+Optional properties:
- brightness-levels: Array of distinct brightness levels. The levels must be
in the range accepted by the underlying LED devices.This is used to translate a backlight brightness levelinto a LED brightness level. If it is not provided, theidentity mapping is used.
- default-brightness-level: The default brightness level.
+Example:
- backlight {
compatible = "led-backlight";leds = <&led1>, <&led2>;brightness-levels = <0 4 8 16 32 64 128 255>;default-brightness-level = <6>;- };
-- 2.17.1
dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel