When DSC is enabled, we need to configure DSI registers accordingly and configure the respective stream compression registers.
Add support to calculate the register setting based on DSC params and timing information and configure these registers.
Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Signed-off-by: Vinod Koul vkoul@kernel.org --- drivers/gpu/drm/msm/dsi/dsi.xml.h | 10 ++++ drivers/gpu/drm/msm/dsi/dsi_host.c | 94 +++++++++++++++++++++++++++++- 2 files changed, 103 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/msm/dsi/dsi.xml.h b/drivers/gpu/drm/msm/dsi/dsi.xml.h index 49b551ad1bff..c1c85df58c4b 100644 --- a/drivers/gpu/drm/msm/dsi/dsi.xml.h +++ b/drivers/gpu/drm/msm/dsi/dsi.xml.h @@ -706,4 +706,14 @@ static inline uint32_t DSI_VERSION_MAJOR(uint32_t val) #define REG_DSI_CPHY_MODE_CTRL 0x000002d4
+#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL 0x0000029c + +#define REG_DSI_VIDEO_COMPRESSION_MODE_CTRL2 0x000002a0 + +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL 0x000002a4 + +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2 0x000002a8 + +#define REG_DSI_COMMAND_COMPRESSION_MODE_CTRL3 0x000002ac + #endif /* DSI_XML */ diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index 438c80750682..0f33e678103f 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -908,6 +908,61 @@ static void dsi_ctrl_config(struct msm_dsi_host *msm_host, bool enable, dsi_write(msm_host, REG_DSI_CPHY_MODE_CTRL, BIT(0)); }
+static void dsi_update_dsc_timing(struct msm_dsi_host *msm_host, bool is_cmd_mode, u32 hdisplay) +{ + struct msm_display_dsc_config *dsc = msm_host->dsc; + u32 reg, intf_width, reg_ctrl, reg_ctrl2; + u32 slice_per_intf, total_bytes_per_intf; + + /* first calculate dsc parameters and then program + * compress mode registers + */ + intf_width = hdisplay; + slice_per_intf = DIV_ROUND_UP(intf_width, dsc->drm->slice_width); + + /* If slice_per_pkt is greater than slice_per_intf + * then default to 1. This can happen during partial + * update. + */ + if (slice_per_intf > dsc->drm->slice_count) + dsc->drm->slice_count = 1; + + slice_per_intf = DIV_ROUND_UP(hdisplay, dsc->drm->slice_width); + dsc->bytes_in_slice = DIV_ROUND_UP(dsc->drm->slice_width * + dsc->drm->bits_per_pixel, 8); + + dsc->drm->slice_chunk_size = dsc->bytes_in_slice; + + total_bytes_per_intf = dsc->bytes_in_slice * slice_per_intf; + + dsc->eol_byte_num = total_bytes_per_intf % 3; + dsc->pclk_per_line = DIV_ROUND_UP(total_bytes_per_intf, 3); + dsc->bytes_per_pkt = dsc->bytes_in_slice * dsc->drm->slice_count; + dsc->pkt_per_line = slice_per_intf / dsc->drm->slice_count; + + if (is_cmd_mode) /* packet data type */ + reg = MIPI_DSI_DCS_LONG_WRITE << 8; + else + reg = MIPI_DSI_COMPRESSED_PIXEL_STREAM << 8; + + reg |= (dsc->pkt_per_line >> 1) << 6; + reg |= dsc->eol_byte_num << 4; + reg |= 1; + + if (is_cmd_mode) { + reg_ctrl = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL); + reg_ctrl2 = dsi_read(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2); + + reg_ctrl |= reg; + reg_ctrl2 |= dsc->bytes_in_slice; + + dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL, reg); + dsi_write(msm_host, REG_DSI_COMMAND_COMPRESSION_MODE_CTRL2, reg_ctrl2); + } else { + dsi_write(msm_host, REG_DSI_VIDEO_COMPRESSION_MODE_CTRL, reg); + } +} + static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi) { struct drm_display_mode *mode = msm_host->mode; @@ -940,7 +995,38 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi) hdisplay /= 2; }
+ if (msm_host->dsc) { + struct msm_display_dsc_config *dsc = msm_host->dsc; + + /* update dsc params with timing params */ + if (!dsc || !mode->hdisplay || !mode->vdisplay) { + pr_err("DSI: invalid input: pic_width: %d pic_height: %d\n", + mode->hdisplay, mode->vdisplay); + return; + } + + dsc->drm->pic_width = mode->hdisplay; + dsc->drm->pic_height = mode->vdisplay; + DBG("Mode %dx%d\n", dsc->drm->pic_width, dsc->drm->pic_height); + + /* we do the calculations for dsc parameters here so that + * panel can use these parameters + */ + dsi_populate_dsc_params(dsc); + + /* Divide the display by 3 but keep back/font porch and + * pulse width same + */ + h_total -= hdisplay; + hdisplay /= 3; + h_total += hdisplay; + ha_end = ha_start + hdisplay; + } + if (msm_host->mode_flags & MIPI_DSI_MODE_VIDEO) { + if (msm_host->dsc) + dsi_update_dsc_timing(msm_host, false, mode->hdisplay); + dsi_write(msm_host, REG_DSI_ACTIVE_H, DSI_ACTIVE_H_START(ha_start) | DSI_ACTIVE_H_END(ha_end)); @@ -959,8 +1045,14 @@ static void dsi_timing_setup(struct msm_dsi_host *msm_host, bool is_bonded_dsi) DSI_ACTIVE_VSYNC_VPOS_START(vs_start) | DSI_ACTIVE_VSYNC_VPOS_END(vs_end)); } else { /* command mode */ + if (msm_host->dsc) + dsi_update_dsc_timing(msm_host, true, mode->hdisplay); + /* image data and 1 byte write_memory_start cmd */ - wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1; + if (!msm_host->dsc) + wc = hdisplay * dsi_get_bpp(msm_host->format) / 8 + 1; + else + wc = mode->hdisplay / 2 + 1;
dsi_write(msm_host, REG_DSI_CMD_MDP_STREAM0_CTRL, DSI_CMD_MDP_STREAM0_CTRL_WORD_COUNT(wc) |